Download Article
Download Article
Whether setting a window pane, creating a stained glass mosaic, or doing some other project, cutting glass is a handy skill that isn't difficult to pick up. With the right tools and a steady hand, anyone can start cutting standard glass at home.
Steps
-
Set up your work area. You'll need a large flat surface, preferably one that is slightly soft and won't scratch your glass. Work in an area that is easy to clean.- Avoid working over carpet because of the risk of getting glass shards on the floor if the glass breaks.
- For their own safety keep pets and children away from your workspace and materials.
-
Clean the glass surface in the area where you plan to make cuts. Any grime or silica on the glass can ruin your score. Wipe these away by running a cloth or your finger along the surface of the glass where you plan to score. [1] X Research sourceAdvertisement
-
Obtain a glass cutter and some light oil. Glass cutters are about the size of a pencil and use a diamond or a hardened wheel to mark a score into glass so that it can be broken cleanly along a line. You can buy cutting oil at a stained glass store or use a small amount of kerosene. [2] X Research sourceEXPERT TIPGlassblowing ExpertsBicycle Glass Co. was founded in 2016 by David Royce and Michael Boyd, two professional glass experts. Bicycle Glass is primarily a lighting company, committed to quality, sustainability, and affordability. All Bicycle Glass products are made of high-quality, recycled glass and are hand-blown by a dedicated team of artisans. The studio is committed to reducing its carbon footprint by conserving energy in all of its production. Using renewable wind energy to offset all electricity usage, the studio is actively working toward the goal of carbon neutrality. Bicycle Glass believes that high-quality, handmade glass products should be within reach for everyone.
Using a glass cutter is the easiest way to cut glass. Commercially available glass cutters are great tools for DIY crafts. They score the glass, making clean breaks along the line. For perfect circles, use a circular glass cutter that scores a circle, making it easier to tap away the unwanted pieces.
-
Measure and mark where you want to score. The score must run from one edge of the glass to the other edge. You can write on the glass with a marker (preferably with a straight edge, if you are cutting a straight line. You can also mark on paper and place the glass on top of the paper. [3] X Research source
- Cut should not be very long. Scores longer than two feet have a high failure rate when breaking.
- Make sure your marks leave about six inches of glass on each side to grip and break. If you cut smaller pieces, you may need to use special tools, like pliers or a light hammer, to break off glass you can't get a hold of.
Advertisement
-
Dip the cutter in the oil and grasp it like a pencil. An oiled cutter creates a smoother score line. Make sure to look at the wheel and make sure it is lined up the way you want the glass to cut.
-
Lay out a straight edge. Use a yardstick or a normal desk ruler. You need something that has a thick enough profile that it won't conflict with the wheel on the cutter.
-
Apply pressure to the glass and you pull the cutter along the surface, rolling on the small carbide wheel. Listen for a smooth sound like ripping silk. A gritty sound means that you are pushing too hard or that you did not oil your cutter. The less sound you make, the better your score will be.
- If you push too hard (a very common mistake), your cut gets "hot," meaning that it snaps and pops.
- You are aiming to get a uniform score. If you are pressing too hard in one spot and perfectly in another, the glass will not break the way that you want it to. Microscopic imperfections in your score will cause your cut to go askew. [4] X Research source
-
Run the cutter smoothly from one edge to the other. Do not run back and forth over the line if you miss a spot.
-
Check your score. You want a score that is not popping and is barely visible, if you were to wipe the oil away. It should look like a small scratch, nothing more. Make sure it runs completely from one edge to the other.
Videos made replacing windowpanes totally doable.
"When my old window frames didn't fit new glass panes, I thought I'd never be able to DIY it. But these step-by-step clips gave me the know-how to measure, score, and cut the glass perfectly. Now, those antique windows are as good as new!"
- Tory H.
First timer put at ease by safety reminders.
"As a total beginner, I was freaked out trying to cut glass for the first time. But the clear pointers on technique plus blunt safety tips built up my confidence. Now I feel ready to rock this homemade project thanks to the super thorough guidance."
- Dawn V.
A broken-down primer demystified everything.
"With zero glass-cutting experience, this step-by-step walkthrough was invaluable. The graphics illustrating scoring angles, breaking techniques, and curve cutting were clutch for visuals. Now I get this intricate craft well enough to give it a shot!"
- David S.
Inspired by a pro's flawless technique.
"Watching a professional neatly measure, score, and cut a custom mirror pane was mesmerizing. Recalling that motivates me to carefully follow all the tips here to mimic that precision. This will help me copy that adept approach!"
- Fiona M.
Exactly what I needed for a household project.
"Needing to resize a small pane for a clock face, the direct instructions and diagrams were perfect. Now I know how to cut glass cleanly instead of living with jagged edges. This practical advice made my home craft possible."
- Kevin K.
Have a story our readers should hear? Share it with 1 billion+ annual wikiHow users. Tell us your story here
.
Advertisement
-
Grasp each side of the cut carefully in your hands. Hold the glass as if you were trying to break a potato chip in half with two hands.
-
Apply minor pressure from the wrist to break the glass along your score. Your elbows do not move. Simply twist your wrists (your right wrist will turn clockwise and your left will turn counterclockwise). Imagine that the score you made is half the depth of the glass and now you need to "open it up" by using the score as a weak spot. You're done as soon as you have two pieces of glass instead of the one you started with.
- When the glass breaks, it may simply start as a "run." If it only runs an inch or so, apply a little more twisting pressure and it will continue to run.
-
Use fine sandpaper or a sharpening stone to remove the sharp edge. This edge will be where the vertical edge meets the horizontal surfaces. Not only does sanding reduce the chances of your being cut, but sanded glass is less likely to chip along the edges and has some added strength.
Advertisement
-
Follow a pattern that connects to the edge. If you are cutting a freehand shape, make sure you are breaking along lines that run from edge to edge. Mark your lines with a marker or set your glass over your pattern.
-
Use several straight lines to cut a sharp curve. You should be able to score along gentle curves normally with a steady hand. For tighter curves, make a series of marks that run along part of the curve and skew off at a tangent outside the piece you want.
-
Flip the glass over and gently press on the center of your score from the backside. You will start a run this way. Follow the run with light pressure and you can watch the glass separate where you scored it. If your score is too close to the edge of a piece of glass, it may run to the edge instead of along your score because that is the easiest path for the run to take.
-
Make some relief cuts to remove small pieces at a time instead of all at once. The smaller the relief cuts, the more accurate your cut will be. Grip smaller pieces with pliers to snap them off. [5] X Research source
-
Smooth your curved edges using a glass router. This machine uses a spinning wheel with fine diamond chips as a grinder. Turn on the router and press your curve firmly against the grinder to smooth out your curve, then sand as normal.EXPERT TIPGlassblowing ExpertsBicycle Glass Co. was founded in 2016 by David Royce and Michael Boyd, two professional glass experts. Bicycle Glass is primarily a lighting company, committed to quality, sustainability, and affordability. All Bicycle Glass products are made of high-quality, recycled glass and are hand-blown by a dedicated team of artisans. The studio is committed to reducing its carbon footprint by conserving energy in all of its production. Using renewable wind energy to offset all electricity usage, the studio is actively working toward the goal of carbon neutrality. Bicycle Glass believes that high-quality, handmade glass products should be within reach for everyone.
Always prioritize safety when working with glass. Make sure to wear proper protective gear and carefully handle the glass. This applies to all processes, including holding, cutting, or polishing. Follow safety protocols to prevent accidents and achieve successful outcomes.
Advertisement
Expert Q&A
Search
-
QuestionHow do you bend a glass?Bicycle Glass Co. was founded in 2016 by David Royce and Michael Boyd, two professional glass experts. Bicycle Glass is primarily a lighting company, committed to quality, sustainability, and affordability. All Bicycle Glass products are made of high-quality, recycled glass and are hand-blown by a dedicated team of artisans. The studio is committed to reducing its carbon footprint by conserving energy in all of its production. Using renewable wind energy to offset all electricity usage, the studio is actively working toward the goal of carbon neutrality. Bicycle Glass believes that high-quality, handmade glass products should be within reach for everyone.Bending glass, particularly plate glass, a process commonly known as slumping, depends on the specific glass type and its intended use. This method doesn't require molten temperatures; instead, it hinges on reaching a temperature at which the glass attains the necessary malleability to bend and adopt different shapes. The precise temperature levels needed for the desired bends may differ, but this bending process is generally carried out in a kiln. The glass is gradually heated to a specific temperature and subsequently cooled to achieve the desired shape.
-
QuestionWould a glass cutter cut mother-of-pearl tiles?Community AnswerYou can cut any tiles you want with a glass-cutter. Just see it as a piece of glass, and when you've carried out the cut, place the handle of the glass-cutter exactly under the cut and press down firmly on both sides. The tile will break easily.
-
QuestionIs cutting a mirror the same as glass, and why is using a lighter a good way to tell how old a mirror is?Community AnswerYes, a mirror is just a piece of glass, but cutting it requires a first step. A mirror is reflective because of the silver color coating on one side. This requires you to first cut the coating with a razor blade exactly on the line where your glass cut is going to be. If you don't do this first, the coating will peel at your cut and ruin your mirror.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Practice on scrap glass until you get the technique down before trying the real thing.Thanks
- If you do not achieve a proper scoring of the glass, do not go back over it with the glass cutter. This will damage the cutting wheel and is not likely not solve your problems.Thanks
- Cut mirrored glass on the reflective side, not on the painted side. You will not be able to score the glass if you run your cutter over the painted back of the mirror. The technique for cutting mirror is otherwise exactly the same as cutting regular glass.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Wear goggles. If the glass cracks irregularly a piece could shoot towards your face.Thanks
- If you apply a decent amount of pressure and nothing happens, stop. If the score is not sufficient, the glass can break at any point, including right into your hands.Thanks
- Wear gloves. Edges and points can be very sharp, so wear a heavy cloth or leather glove that fits snugly so you don't lose your dexterity.Thanks
- Clean your work area thoroughly to remove any bits of glass you might have created. Even if you can't see them, they can become embedded in your feet or hands and hurt.Thanks
- Exercise caution if you decide to use kerosene since it is toxic and can cause serious harm when swallowed or breathed in. [6] X Trustworthy Source MedlinePlus Collection of medical information sourced from the US National Library of Medicine Go to sourceThanks
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about working with glass, check out our in-depth interview with Bicycle Glass .
References
- ↑ https://www.youtube.com/watch?v=G8-euXDNR8o
- ↑ https://chatterglass.wordpress.com/2015/05/27/lubricate-your-cutter-wheel/
- ↑ https://www.popularmechanics.com/home/a26289680/how-to-cut-glass/
- ↑ https://www.freepatternsforstainedglass.com/cutting-glass.html
- ↑ https://jamesclear.com/inside-cuts
- ↑ https://medlineplus.gov/ency/article/002807.htm
About This Article
Article Summary
X
Before you cut glass, clean the surface of the glass, then measure and mark the area you want to score. Dip a glass cutter into oil and grasp it like a pencil, then carefully pull the cutter along the mark you made to score the glass. Hold the sheet of glass in your hands and carefully apply minor pressure from your wrists to break the glass along the score. Smooth the edges with fine sandpaper or a sharpening stone. For tips on cutting on a curve, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,712,050 times.
Reader Success Stories
- "With zero glass-cutting experience, this step-by-step walkthrough was invaluable. The graphics illustrating scoring angles, breaking techniques, and curve cutting were clutch for visuals. Now I get this intricate craft well enough to give it a shot! " ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"With zero glass-cutting experience, this step-by-step walkthrough was invaluable. The graphics illustrating scoring angles, breaking techniques, and curve cutting were clutch for visuals. Now I get this intricate craft well enough to give it a shot!
"
..."
more
"As a total beginner, I was freaked out trying to cut glass for the first time. But the clear pointers on technique plus blunt safety tips built up my confidence. Now I feel ready to rock this homemade project thanks to the super thorough guidance.
"
..."
more
"When my old window frames didn't fit new glass panes, I thought I'd never be able to DIY it. But these step-by-step clips gave me the know-how to measure, score, and cut the glass perfectly. Now, those antique windows are as good as new!
"
..."
more
"Watching a professional neatly measure, score, and cut a custom mirror pane was mesmerizing. Recalling that motivates me to carefully follow all the tips here to mimic that precision. This will help me copy that adept approach!"
..."
more
"Needing to resize a small pane for a clock face, the direct instructions and diagrams were perfect. Now I know how to cut glass cleanly instead of living with jagged edges. This practical advice made my home craft possible."
..."
more
