Download Article
Download Article
Mixtures are composed of two or more components that have different properties. There are many methods used to separate mixtures into their basic components. For fluids, these methods are known as chromatography. Chromatography works to separate the mixture into its components based on their relative ability to move along/through the stationary phases (fixed phase) by the mobile phase. Some components of the mixture move through more easily, while others are held back. This causes the mixture to separate into bands of different components.
Things You Should Know
- Cut a coffee filter into strips and draw a line 1 in (2.5 cm) from the bottom of each strip with a marker.
- Lower a strip into a cup of water so the line is close to the water but not submerged. Watch the marker color creep up the filter to create colored bands.
- Inspect the colored bands on the strip. Lighter shades will travel further than darker ones because they have smaller compounds that move faster.
Steps
-
Make or buy a chromatography strip. A chromatography strip is a strip of material that the mobile phase mixture, a liquid or gas, moves through. The strip serves as the stationary stage so you can see the rate of travel of the different components in the mobile phase. You can by specially formulated chromatography strips for superior results, but for simple chromatography you can make your own. Cut a coffee filter into straight strips about 1 inch (2.5 cm) wide and five or six inches long. [1] X Research source
- Paper towels, or any other paper, can be substituted for the coffee filter.
-
Place a colored line near the bottom of the strip. Measure up about 1 inch (2.5 cm) from the bottom of the strip. In this experiment, you’ll separate the components from a marker. Use a black marker to draw a straight line across the width of the strip. Make sure that your line is up high enough that you can submerge the bottom of the paper without submerging the line. [2] X Research source
- In place of a line, some people use a dot. This will work as well, but the bands will not be as clearly defined using this method.
Advertisement -
Secure the chromatography strip vertically. Use clothespins to secure the strip vertically so you don’t have to hold it in the water yourself later on. It should be hung such that the side with the marker line is nearest the ground. Make sure to place the clothespin as high on the strip as possible while still having a good hold. If the clip is too far down on the strip, it may interfere with the bands.
- You can hang the strip with paper clips, tape, or any other mechanism you see fit.
Advertisement
-
Put water in a cup. When doing simple chromatography, your solvent (the liquid that carries the mobile phase across the stationary phase) will be water. Add a little water to a clear cup or glass. You only need enough for the chromatography strip to soak up, so just a few ounces is plenty. [3] X Research source
-
Lower the chromatography strip into the water. Keeping your chromatography strip vertical, lower it into the water. Make sure that you have an apparatus set up to hold the strip there, as this process can take quite a bit of time. The bottom of the strip should be submerged, but the marker line should not be submerged. If you accidentally submerge this line, throw the strip away and make another. [4] X Research source
- An example apparatus would be to have the clothespin that is holding the strip clamped to a pencil lying across the top of the glass. This way, the strip dangles down and just barely touches the water.
-
Wait patiently. As the water moves up the strip, it will carry the different compounds in the marker with it. The lighter (smaller) compounds will move faster, and the heavier (larger) compounds will move slower. This will separate the compounds out into “bands” based on their size. This is a slow process, however. Watch the strip until you see the water reach about 1 inch (2.5 cm) from the top of the strip. [5] X Research source
- The exact time it takes the water to reach 1 inch (2.5 cm) from the top of the strip will depend on what kind of strip you are using.
- Don't carry the system after submerging the strip; avoid any stirring that will affect the result by diffusion of bands.
Advertisement
-
Take the strip out. Place it on a smooth surface and wait for it to dry.
-
Count bands you see. Once you have removed the strip from the water, your bands should stay in place. This will allow you to count how many different bands are visible on your strip. That will give you a rough idea of how many different sized compounds are in the marker’s ink. [6] X Research source
-
Notice the color of each band. The marker’s black ink is made up of several different pigments. These pigments all have their own unique colors. When you separate them into bands, the bands will be the color of that individual pigment. By noting the color of each band, you can analyze what color pigments went into creating the black ink in the marker. [7] X Research source
-
4List the bands from the top of the strip to the bottom. Write the colored bands down based on how far they traveled. The bands near the top are your lightest compounds, and the bands near the bottom are your heaviest compounds. You are also likely to notice a color trend from top to bottom. Lighter colors are usually smaller compounds, and thus move farther up the strip, and darker colors will linger closer to the bottom because they are generally heavier compounds. [8] X Research source
- The ratio of the distance a compound moved (Dc) to the distance the solvent moved (Ds) is called the Rf value. You can calculate the Rf value for any band by dividing the distance the band traveled from the original line to the distance the solvent traveled from the original line. [9] X Research source
- For example, if you have a band two inches past above the line you made and the solvent traveled five inches above the solvent, you could use the equation D band
/D solvent
= Rf. For this example, that means:
- Rf = 2 inches / 5 inches
- Rf = 0.4
Advertisement
Community Q&A
Search
-
QuestionHow are the chemicals separated for paper chromatography?Community AnswerChromatography separates substances into their components. All forms of chromatography work on the same principle. They all have a stationary phase (a solid, or a liquid supported on a solid) and a mobile phase (a liquid or a gas).
-
QuestionWhy does chromatography work? What should happen if I attach a different substance, such as chlorine?Mohsin257Community AnswerIt works on the principle of adsorption or distribution in between mobile and stationary phase. Chlorine is a single substance we use to separate the mixture of the substances.
-
QuestionIs a chromatogram the same as chromatography?Mohsin257Community AnswerThere is a slight difference. Chromatography is the process or technique; a chromatogram is the result of chromatography on paper.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If you wish to do this more scientifically, you can actually buy chromatography paper, which is similar to a coffee filter but creates a much more distinct and less blurry strip of colors when used properly. This is available through various lab equipment suppliers.Thanks
- Try different colored markers, and notice which reaches the top first, which creates the prettiest strip of pigments, and so on.Thanks
- Chromatography is used in actual scientific labs for various reasons, and can actually become quite complex. Chromatography includes a wide variety of scientific tests and is not limited to this method.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be careful to not submerge the mark on the filter. This will ruin the chromatography.Thanks
- Let the mark dry.Thanks
Advertisement
Things You'll Need
- Clothespin
- Coffee filter
- Scissors
- Water
- Cup
- Black marker
References
- ↑ https://sciencing.com/simple-chromatography-experiments-9589.html
- ↑ https://sciencing.com/simple-chromatography-experiments-9589.html
- ↑ https://www.khanacademy.org/science/class-11-chemistry-india/xfbb6cb8fc2bd00c8:in-in-organic-chemistry-some-basic-principles-and-techniques/xfbb6cb8fc2bd00c8:in-in-methods-of-purification-of-organic-compounds/a/principles-of-chromatography
- ↑ https://www.teachengineering.org/activities/view/wst_environmental_lesson02_activity1
- ↑ https://www.teachengineering.org/activities/view/wst_environmental_lesson02_activity1
- ↑ https://www.khanacademy.org/science/class-11-chemistry-india/xfbb6cb8fc2bd00c8:in-in-organic-chemistry-some-basic-principles-and-techniques/xfbb6cb8fc2bd00c8:in-in-methods-of-purification-of-organic-compounds/a/principles-of-chromatography
- ↑ https://chem.libretexts.org/Bookshelves/Analytical_Chemistry/Supplemental_Modules_(Analytical_Chemistry)/Instrumentation_and_Analysis/Chromatography/V._Chromatography/E._Paper_Chromatography
- ↑ https://chem.libretexts.org/Bookshelves/Analytical_Chemistry/Supplemental_Modules_(Analytical_Chemistry)/Instrumentation_and_Analysis/Chromatography/V._Chromatography/E._Paper_Chromatography
- ↑ http://www.bbc.co.uk/schools/gcsebitesize/science/add_edexcel/covalent_compounds/seperationrev2.shtml
About This Article
Article Summary
X
To do simple chromatography, start by cutting a straight strip out of a coffee filter or paper towel. Next, measure 1 inch up from the bottom of the strip and use a black marker to draw a straight line. Then, secure the strip to a pencil with tape so that it hangs vertically. Once the strip is ready, put water in a cup and lower the strip in so the line stays dry but everything below it is submerged, and wait as the water moves all the way up the strip. Finally, remove the strip and observe the bands created by the marker traveling up the strip. To learn how to list the bands and their compounds, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 204,739 times.
Reader Success Stories
- "I have a chemistry test today and they recently introduced chromatography in the syllabus. But there is nothing about chromatography in the book advised by Cambridge, the book that I use to study. So now I'm here searching how to do just that. Thanks a lot!" ..." more
Advertisement
"I have a chemistry test today and they recently introduced chromatography in the syllabus. But there is nothing about chromatography in the book advised by Cambridge, the book that I use to study. So now I'm here searching how to do just that. Thanks a lot!"
..."
more
"I was rushing to do my last minute homework and I couldn't find anything, then I clicked this link and it helped me so much. Now I can turn in my assignment on time. Hooray!!!"
..."
more
"I was doing a very unclear science experiment, and then this told me that I actually shouldn't use a permanent marker."
..."
more
"At first I didn't even know what or how it worked but this step by step helped me out a bunch. "
"I needed a chromatography referance for my science project. This article really helped."
