PDF download Download Article PDF download Download Article

The need to remove or lower a gas tank from an automobile is very uncommon, but there are a few instances where it may be necessary to drop the gas tank. Components like an internal fuel pump, the fuel gauge sensor, or fuel lines and electric wires may need to be serviced, replaced, or repaired. This article will walk you through everything you need to know about dropping a gas tank safely and efficiently.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Method 1
Method 1 of 4:

Preparations

PDF download Download Article
  1. There are many different fasteners, clamps, and connections that must be removed or loosened to remove a fuel tank. Here are some:
    • Strap bolts, usually requiring a 1 2 or 9 16 inch (1.3 or 1.4 cm) or 12, 13, or 14 mm open-end wrench.
    • Slotted and Phillips screwdrivers for hose clamps.
    • Special tools for disconnecting fuel line fittings.
    • Other items you may need include a jack, jack stands, a pump for removing the fuel, fuel rated containers for fuel that is removed from the tank, rags, and a fire extinguisher in case of an emergency.
  2. Hard, compacted soil is acceptable if no other option is available.
    Advertisement
  3. Submersible fuel pumps are usually readily available from a local auto parts supplier, but fuel level sensing units may require special ordering from a dealer.
  4. Even an empty gas tank can be heavy and difficult to manage while lying underneath a vehicle. It is also better to have an assistant to hand you tools, and to respond if you have an accident while performing this task.
  5. Advertisement
Method 2
Method 2 of 4:

Removing the Fuel

PDF download Download Article
  1. [1]
  2. Most fuel tanks have a 12 to 20 gallon (45.4 to 75.7 L) capacity, so if your fuel gauge is working properly, you can estimate the amount of fuel in your tank. Get the EPA/Underwriter's Laboratory approved gas container ready below your car in a position to catch the draining fuel. Remove the drain plug if your car has one, being careful not to allow the fuel to spill on your person when it begins to drain.
    • If your car doesn't have a drain bolt, find your tank's drainpipe or filler hose.
  3. Locate the proper adapter for your car's drainpipe or filler hose, if necessary, and connect the intake hose from an air or hand pump to the pipe.
  4. Use the pump to extract all of the fuel. Seal any openings so vapors cannot escape. [2]
  5. Advertisement
Method 3
Method 3 of 4:

Raising the Car

PDF download Download Article
  1. [3]
  2. You will need to raise it high enough to access the brackets or straps that secure the tank, and if the tank it to be completely removed from underneath the vehicle, you will want to be sure it is high enough the tank will clear the frame members. Once the car is lifted off the ground, support it with jack stands. [4]
  3. Advertisement
Method 4
Method 4 of 4:

Removal of the Tank

PDF download Download Article
  1. You might have to do this a couple of times, using a small stiff brush to loosen the accumulated debris.
  2. Place a work mat, a sheet of plywood, or even a scrap piece of carpet underneath the car to lay on while working for your own comfort, and to prevent the loss of fasteners, nuts, and washers if you want. This will also give you something to protect the tank if you need to drag it out from underneath the vehicle.
  3. Remove the ground wire screw from the chassis if your vehicle if it is equipped with one. [5]
  4. Sometimes you need a specialized tool to separate "quick disconnect" fittings. Consult your vehicle's service manual for directions on your specific type of car.
  5. Note that often, the tank must be dropped several inches before you can access these connections, so be careful they do not become fouled while doing so.
  6. There are two possible types. If yours is one piece, remove the screws around the filler neck. If it is a two or three-piece assembly, loosen the clamp and remove the neoprene hose from the filler neck. Make sure the fuel hose that goes to the top of your gas tank has enough room to drop down when the tank is lowered. These are often molded assemblies and may need to be guided while the tank is lowered to avoid obstructions and possible damage to this part. [6]
  7. Usually, there are two straps that wrap around the fuel tank, the ends of which are adapted to bolts that fasten through a bracket mounted to the vehicle's frame. Some vehicles have two support frames similar to a trapeze with four bolts fitted through them which must be removed.
  8. Carefully lower the fuel tank to the ground as you finish loosening the bolts. You may be able to place a low profile floor jack underneath the tank to help lower it, provided you have one and the car is jacked up high enough to allow it. [7]
  9. They are fairly flexible, but make sure you don't kink or damage them in the process. [8]
  10. Perform the maintenance or repairs required to the tank, then reinstall it by following the previous steps in reverse order.
  11. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What will clean inside of gas tanks?
    Community Answer
    If it's really rusted inside, use diesel fuel of about 1/2 gallon. You will need two people to hold it up and shake it around, then empty it with a suction hose. If not rusted, look for a gas tank cleaning company or try a recycle auto parts yard in your area. A salvage yard might be cheaper than a cleaning service.
  • Question
    Where is the fuel filter located?
    Community Answer
    It could be inside the tank, inside the pump, or it could be an inline filter. Check with your local mechanic shop or consult a repair manual.
  • Question
    Can I buy something to clean sugar from a gas tank?
    Logic Johnson Lafontaine
    Top Answerer
    There aren't any reliable products sold over the counter for this. The only way to clean it is to physically drop the tank and dump the crap out. Also, I hope for your sake that the car hasn't been driven since the sugar got in the tank, or else your entire fuel system will be contaminated (pump, lines, injectors, etc.), and then you've got a much bigger problem on your hands.
Ask a Question
      Advertisement

      Tips

      • Protect yourself from contact with gasoline, and avoid breathing fumes while working.
      • Get help with this project if possible. Gas tanks may be very heavy, even when drained, depending on how large they are, and the material they are constructed with.
      • Obtain a service manual or aftermarket vehicle maintenance manual before starting, if possible. This article is a general guideline, and it is not practical to cover every specific type of vehicle in it.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always use an approved gas container. Failure to do so can cause spills.
      • Never try to move a gas tank when it has any gasoline in it. Gasoline is very heavy and attempting to move the full tank can result in injury and spills.
      • Always wear eye protection and gloves when working and work in a well-ventilated area.
      • Do not use torches to heat up stubborn bolts. Be careful not to knock over your drop lights while working. Sparks from these can cause gas fumes to explode.
      • Always dispose of contaminated gasoline following local laws.
      Advertisement

      Things You'll Need

      • Eye protection and gloves
      • EPA approved gas container
      • Pump and hose fittings
      • Car hoist or jack and stands
      • Compressor or can of compressed air
      • General Tools (screwdriver, wrench, etc.)
      • Fitting tools (if needed)
      • Fire extinguisher

      About This Article

      Thanks to all authors for creating a page that has been read 87,972 times.

      Did this article help you?

      Advertisement