PDF download Download Article PDF download Download Article

A leather couch can offer you many things, including quality, comfort, and style. Even the best leather does fade or discolor over time, however. Your once-new leather couch may not look as sharp after several years, or you might come across a perfect leather couch at a thrift store that is the wrong color or is stained. Start by cleaning the couch with acetone and then apply several coats of leather dye to the entire piece of furniture. In a couple of hours, your couch will look brand new!

Part 1
Part 1 of 2:

Cleaning and Deglazing the Leather

PDF download Download Article
  1. You will be working with chemicals that you should avoid breathing in. A basement, garage or outdoor driveway will provide a good place to work and keep chemical fumes out of your living space. You can also wear a mask to avoid breathing in fumes. [1]
    • If you must work in your living space, open as many windows and doors as possible and run a fan to ventilate the space.
  2. Use a drop cloth to protect the surface or floor you are working on. Leather dye can stain many surfaces, so make sure your floor is covered before you begin. It's best to dye cushions separately from the couch itself, also over a drop cloth.
    • You can also use old clothes or rags if they completely cover the space under your couch.
    Advertisement
  3. Remove any dust or dirt that is on the leather using a cloth and soapy water. Use a mild detergent. Do not soak the couch, as this can warp the leather. Lightly rub it with a cloth that you dip in the water and wring out. [2]
    • You can try to get any stains out of your leather at this point. If they are light, the dye will probably cover them up. However, dark, noticeable stains might make your final dye job look uneven.
    • White vinegar or rubbing alcohol can get rid of most stains.
  4. If there is any part of your couch that you do not want to dye, such as wooden or metal hardware, cover it with painter's tape. Place the tape as close to the edge of the leather as possible. [3]
    • If you need to, cut the painter's tape to a smaller size to make it fit in any small nooks and crannies.
  5. Most leather furniture will have a protective coating to seal in dye and protect the leather. You can remove this, along with any lingering oils, by using a clean rag to rub deglazer or acetone into the surface of the couch. It will evaporate almost immediately, leaving your leather clean and ready to dye. [4]
    • Some of the original dye may rub off of the leather as you deglaze it.
    • You can buy leather deglazer online or at most hardware stores. Use acetone (not nail polish remover) for a less expensive but equally effective solution.
    • Avoid using products with alcohol or mineral spirits, as these will dry out the leather.
    EXPERT TIP

    Mallika Sharma

    Certified Leather Care Technician
    Mallika Sharma is a Certified Leather Care Technician and the Founder of The Leather Laundry, a niche spa service for luxury leather gear in India. Mallika specializes in leather cleaning, coloring, repairing, and restoring for shoes, handbags, jackets, wallets, belts, and sofas. She holds a Master’s degree in Finance and Investment from the University of Edinburgh Business School. Mallika is a certified Professional Leather Care Technician and trained with the globally reputed leather care company, LTT in the United Kingdom.
    Mallika Sharma
    Certified Leather Care Technician

    Prep leather before painting it. Properly preparing the surface of leather before painting it helps the color fully absorb for a smooth, even finish. First clean the leather thoroughly with a solvent like thinner, rubbing alcohol or ammonia to open up and clear out the pores. Then, airbrush on leather paint, followed by applying a fixing agent or sealant on top to properly set and seal in the painted color.

  6. Advertisement
Part 2
Part 2 of 2:

Applying the Dye

PDF download Download Article
  1. You can find leather dye at a specialty leather shop, at some craft stores, or online. [5] You can easily dye a light leather to look darker, but making a dark leather couch look lighter is more difficult. Avoid dying a black or very dark couch a light color. For medium dark colors, expect to apply more layers of dye. [6]
    • Combine colors if you can't find a dye in the exact shade you are looking for. For example, if you want a dark brown but the brown dye seems too light, mix a little black die into it. Use white dye to get a lighter color.
  2. Getting the leather slightly wet will help it absorb the dye. Start by spraying a small section of the leather, because you will dye it in small sections. Avoid completely soaking the leather because this can cause it to stain or warp. [7]
    • If the leather is unevenly wet, it will absorb the dye unevenly.
  3. Some leather dyes come with wool daubers you can use to apply them. You can also use a new sponge, which works well to spread the dye evenly. [8] Place a drop or two of dye on a wool dauber or sponge and spread it over the leather using parallel strokes, making sure to get all the nooks and crannies. A little bit of dye goes a long way, so don't use more than a few drops at a time, or the dye will drip and run down your furniture. [9]
    • Work in small sections at a time. For instance, do each arm, then each cushion, then divide the top and back into small, equal sections. Be sure to spritz each area with water before applying the dye.
    • Wear gloves to protect your hands from the dye.
    • Don't worry about trying to get an even dye job on the first coat. Any streaks or unevenness will be less visible as you apply more coats.
  4. You don't need to dampen the leather with water again after doing the first coat. Apply as many coats as you need to get the color you are looking for. Most leather couches will need between 3 and 6 coats total. Let each coat dry completely before applying another. [10]
    • If you are attempting to dye a dark couch lighter, you might need to apply more coats.
    • If you apply too much dye, it will look metallic or too shiny. To remove excess dye, soak a rag in rubbing alcohol and run it over the affected area.
    • Keep in mind that no matter how careful you are, hand dying leather will result in a slightly uneven look. If the dye is significantly darker in one spot, use rubbing alcohol to take off some of the excess dye.
  5. Finisher will seal in the dye and protect it from fading. Give your couch at least 1 hour to dry completely after applying the final coat of dye. Spray the finisher on the leather couch and rub it in with a damp, clean rag. Use long strokes to evenly coat the surface of the leather with finisher. Finishers usually dry in about 3 hours. [11]
    • You can move the couch back into your living space and start using it again once the finisher is dry.
    • Leather finisher can be purchased wherever you buy leather dye. It may also be called leather top coat. Choose a glossy finish for more shine or satin finish for a more matte result.
  6. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    What is the best dye to use on leather?
    Mallika Sharma
    Certified Leather Care Technician
    Mallika Sharma is a Certified Leather Care Technician and the Founder of The Leather Laundry, a niche spa service for luxury leather gear in India. Mallika specializes in leather cleaning, coloring, repairing, and restoring for shoes, handbags, jackets, wallets, belts, and sofas. She holds a Master’s degree in Finance and Investment from the University of Edinburgh Business School. Mallika is a certified Professional Leather Care Technician and trained with the globally reputed leather care company, LTT in the United Kingdom.
    Certified Leather Care Technician
    Expert Answer
    Use pigments to dye Nappa leather. If your leather is one-touch or drum-dyed leather, use water dye instead.
  • Question
    If I have two couches that are different colors (one gold and the other mint green), will they both dye the same color black?
    Community Answer
    If you want it to be the same color, you should sand it first. After sanded, you should be able to dye it to the same color. Otherwise, you will almost certainly end up with two different shades of black.
  • Question
    Is it possible to dye dark green leather to a lighter color?
    Community Answer
    Yes. You'll need to take additional steps such as buffing/ sanding the piece first, though. Also, make sure you have an opaque dye rather than a translucent stain.
See more answers
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Things You'll Need

      • Drop cloths
      • Leather dye
      • Acetone or leather deglazer
      • Spray bottle of water
      • Cloths, rags
      • Sponge
      • Gloves
      • Leather finisher

      About This Article

      Article Summary X

      If you want to give your leather couch a fresh dye job, you’ll need to first clean it and remove any glaze or surface treatment. Put the couch in a well-ventilated area and wipe it down with soapy water, then rub the surface with a rag soaked in deglazer or acetone. Protect the legs and any other parts you don’t want to dye with painter’s tape. Once you’re ready to dye the couch, spritz a small section of the leather with water. This will help the leather absorb the dye more easily. Pour 1 or 2 drops of leather dye onto a clean sponge or wool dauber, then spread the dye over the dampened section of leather using long, parallel strokes. Move from one section of the couch to another, and always spray a little water on before applying the dye. Let the couch dry for 1 hour, then repeat the process 2 to 5 times. After the last coat is dry, spray on some finisher to seal in the color and rub it in with a dry rag. Scroll down for tips on how to choose the perfect dye color for your couch!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 515,632 times.

      Reader Success Stories

      • Sharon Bayus

        Sep 1, 2021

        "I give the article 4 stars bcs it advises the use of sponges to remove old dirt and dye and to apply the bee dye. I ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement