How to Find the Slope of a Line Using Two Points

Reviewed by Grace Imson, MA

Last Updated: February 26, 2024 Fact Checked

Finding the slope of a line is an essential skill in coordinate geometry, and is often used to draw a line on graph, or to determine the x- and y-intercepts of a line. The slope of a line is a measure of how steep the line is, ^{[1]
X
Research source} which is found be determining how many units the line moves vertically per how many units it moves horizontally. You can easily calculate the slope of a line using the coordinates of two of its points.

Practice Problems

Find the Slope of a Line Using Two Points Practice Problems

Find the Slope of a Line Using Two Points Practice Problems ANSWER KEY

Part 1

Part 1 of 2:

Setting up the Problem

Download Article

Slope is defined as “rise over run,” with rise indicating vertical distance between two points, and run indicating the horizontal distance between two points. ^{[2]
X
Research source}
2
Pick two points on the line and label their coordinates. These can be any points the line runs through.
- You can also use this method if you are given two points on the line, without having the line graphed in front of you.
- Coordinates are listed as $(x,y)$ , with $x$ being the location along the x, or horizontal axis, and $y$ being the location along the y, or vertical axis.
- For example, you might choose points with coordinates $(3,2)$ and $(7,8)$ .
Advertisement
3
Determine the order of your points. One point will be point 1, and one point will be point 2. It doesn’t matter which point is which, as long as you keep them in the correct order throughout the calculation. ^{[3]
X
Research source}
- The first point’s coordinates will be $(x_{{1}},y_{{1}})$ , and the second point’s coordinates will be $(x_{{2}},y_{{2}})$
The formula is ${\frac {rise}{run}}={\frac {y_{{2}}-y_{{1}}}{x_{{2}}-x_{{1}}}}$ . The change in y-coordinates determines the rise, and the change in x-coordinates determines the run. ^{[4]
X
Research source}

Part 2

Part 2 of 2:

Finding the Rise and Run

Download Article

1
Plug the y-coordinates into the slope formula. Make sure you are not using the x-coordinates, and that you are substituting the correct y-coordinates for the first and second points. ^{[5]
X
Research source}
- For example, if the coordinates of your first point are $(3,2)$ , and the coordinates of your second point are $(7,8)$ , your formula will look like this:
  ${\frac {rise}{run}}={\frac {8-2}{x_{{2}}-x_{{1}}}}$
2
Plug the x-coordinates into the slope formula. Make sure you are not using the y-coordinates, and that you are substituting the correct x-coordinates for the first and second points. ^{[6]
X
Research source}
- For example, if the coordinates of your first point are $(3,2)$ , and the coordinates of your second point are $(7,8)$ , your formula will look like this:
  ${\frac {rise}{run}}={\frac {8-2}{7-3}}$
3
Subtract the y-coordinates. This will give you your rise. ^{[7]
X
Research source}
- For example, if your y-coordinates are $8$ and $2$ , you would calculate $8-2=6$ .
4
Subtract the x-coordinates. This will give you your run. ^{[8]
X
Research source}
- For example, if your x-coordinates are $7$ and $3$ , you would calculate $7-3=4$ .
5
Reduce the fraction if necessary. This result will give you the slope of your line. ^{[9]
X
Research source}
- For complete instructions on how to reduce a fraction, read Reduce Fractions .
- For example, ${\frac {6}{4}}$ can be reduced to ${\frac {3}{2}}$ , so the slope of a line through points $(3,2)$ and $(7,8)$ is ${\frac {3}{2}}$ .
6
Be careful when working with negative numbers. A slope can be positive or negative. A line with a positive slope moves up left-to-right; a line with a negative slope moves down left-to-right.
- Remember, if the numerator and denominator are both negative, then the negative signs cancel out, and the fraction (and slope) is positive.
- If either the numerator or the denominator is negative, then the fraction (and slope) is negative.
7
Check your work. To do this, look at the rise and run you calculated for your slope. Starting at your first point, count up the rise, then over the run. Repeat counting up the rise and over the run until you reach your second point.
- If you do not reach your second point, then your calculation is incorrect.

Community Q&A

Search

Add New Question

Question

What does a negative slope look like?

Community Answer

A negative slope moves down, left-to-right.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 7 Helpful 23
Question

Can you do this without a graph, like when they give you 2 coordinates?

Emma Han

Community Answer

Yes you can. The graph is only there to help you. You can only find the gradient if they give you 2 points.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 4
Question

How do you compute slope with (-6,3) and (2,9)?

GB742

Top Answerer

Use the formula m = (y2 - y1)/(x2 - x1). In this example: (9 - 3)/(2 - -6) = (6)/(8). Therefore, the slope of the line connecting (-6,3) and (2,9) is 6/8.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 3

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Slope is often labeled $m$ . Thus, once you have determined the slope of the line, you can work with the equation of a line, which is $y=mx+b$ , where $m$ is the slope of the line and $b$ is the y-intercept.

Thanks
Helpful 1 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

Log in

How to Find the Slope of a Line Using Two Points

Steps

Practice Problems

Setting up the Problem

Finding the Rise and Run

Community Q&A

Tips

You Might Also Like

Expert Interview

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories