How to Fix Bent Pins on a CPU

A CPU is both a critical and fragile piece of hardware. A drop to the floor or a failed attempt at mounting can easily result in bent pins. Bent pins will prevent the CPU from seating normally and likely cause hardware errors in your computer. Luckily, there are some easy household remedies you can try before dropping money on a new unit.

Choose a Method

Credit card : Good general approach.
Mechanical pencil : Best when there are only a few bent pins.
Sewing needle : Necessary for severely bent pins.

Method 1

Method 1 of 3:

Using a Credit Card to Straighten Pins

Download Article

You want to place the CPU on a hard, flat surface with the pins facing straight into the air. Be sure you have discharged any static electricity by touching a grounded metal object.
2
Find the right card for the job. Typically a standard plastic credit card or gift card will do. Find a row on your CPU that has no bent pins in it. Take one of your cards, stand it on edge and gently run it through the row of pins. If the card is the right thickness it should slide between the pins with slight resistance and no bending of the pins.
- If there is no contact with the pins or no resistance, then the card is too thin.
- If the card is too thick you will not be able to slide the card through the pins without bowing out or bending pins. Err on the side of caution and never force the card through.
Advertisement
For example, if there is one bent pin, run the card in the rows surrounding it, much like the “#” symbol. This will bend the pin straight in each direction.
4
Attempt to mount the CPU. If it doesn't slide right in the socket, it is possible that there is still a bent pin. Sometimes pins in the middle can be difficult to detect.
- Important: do not attempt to shove or jam the CPU in.

Method 2

Method 2 of 3:

Realigning Pins with a Mechanical Pencil

Download Article

This method is best used when there are a few individual bent pins. You will want a mechanical pencil with a .5 or .7 millimeter opening. These sizes should fit comfortably around a CPU pin.
You need the opening to be free of obstructions.
Carefully maneuver the tip to bend the pin back into place. You can use the angle of the pencil as a guide to track how straight the pin is.

Method 3

Method 3 of 3:

Using a Sewing Needle

Download Article

1
Get a properly sized needle. If the needle does not fit between two pins comfortably then it is too large. The advantage of a needle is its thin size, which allows you to unbend pins that other tools cannot get under.
- A toothpick or small tweezers are similar options that can work.
Take care not to scratch the surface of the CPU.
This will leverage the bent pin back to a straighter position.
4
Assess the situation for how to move forward. If the pin seems reasonably straight, you can attempt to remount the CPU. If the pin still needs straightening, try the credit card or mechanical pencil now that you can get underneath it. You can also continue to manipulate the pins with needle to try to get them straighter.
- Always be careful when re-bending the pins a lot, as there is the risk of breakage

Expert Q&A

Search

Add New Question

Question

How can I tell if I've actually straightened the pin?

Luigi Oppido
Computer & Tech Specialist
Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.

Luigi Oppido

Computer & Tech Specialist

Expert Answer

It's very difficult to to do it with the naked eye. I've personally never been able to figure out if I've actually done it correctly without a magnifying glass. You've really got to have a careful eye and a steady hand to pull this off.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 6
Question

Can I just use regular tweezers for this?

Luigi Oppido
Computer & Tech Specialist
Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.

Luigi Oppido

Computer & Tech Specialist

Expert Answer

No, you need to use electrical tweezers with nonstatic protection. They've also got to be exceptionally small. It's just really hard to do it with standard tweezers.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 2
Question

Why do CPU pins bend so easily?

Luigi Oppido
Computer & Tech Specialist
Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.

Luigi Oppido

Computer & Tech Specialist

Expert Answer

The metal they use to produce CPUs is just super flexible. Touching the pins the wrong way can bend them really easily.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 2

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Best Buy gift cards seem to fit perfectly for some odd reason.

Thanks
Helpful 5 Not Helpful 1
If the CPU isn't mounting, feel where it is sticking. If it is mounting in every corner but one, find the bent pin(s) in that corner.

Thanks
Helpful 1 Not Helpful 1
Hold the CPU up to some light and look through it to try to find all the bent pins. If it isn't mounting, look especially for single bent pins towards the center, as they are hard to spot and you may have missed one.

Thanks
Helpful 1 Not Helpful 3

Tips from our Readers

The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.

What worked for me was a pci-e slot cover from a computer case, slim enough to slide through and strong enough to bend the pins backs into shape.

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Having improperly installed or handled the CPU (unless it arrived with bent pins) will void your warranty on the CPU.

Thanks
Helpful 1 Not Helpful 0
In most modern processors, the CPU pins are made from very thin wire plated with gold, and as such, are very soft, pliable, and break very easily. There is no way to replace broken pins on a CPU, unless you have special equipment and skill.

Thanks
Helpful 1 Not Helpful 0
Do not forget to apply the thermal goo on top of the CPU if you had to take the heat-sink off.

Thanks
Helpful 1 Not Helpful 1
Do not bend the pins too much. They do not have to be perfect; as long as they are mostly aligned the action of closing the CPU socket will push them straight. However, repeated back and forth bending can cause pins to break off.

Thanks
Helpful 0 Not Helpful 0

Things You'll Need

A CPU
A gift card, credit card, or ID (the plastic card that comes with some thermal paste should be the right thickness)
A 0.5mm or .07mm mechanical pencil
A sewing needle of appropriate diameter
A magnifying glass will help you to periodically assess your progress. Some free-standing models or a loop may allow you to perform the entire task with its aid

Log in

How to Fix Bent Pins on a CPU

Choose a Method

Steps

Using a Credit Card to Straighten Pins

Realigning Pins with a Mechanical Pencil

Using a Sewing Needle

Expert Q&A

Video

Tips

Tips from our Readers

Warnings

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Is this article up to date?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories