PDF download Download Article PDF download Download Article

If your Xbox 360 does not work and your rings on the console are red, this means that your Xbox 360 has a hardware failure. In this case you should read the error code on the TV screen. Use this guide to fix the following error codes: E67, E68, E69, E70, E79. [1] Note: You'll only see an error code with 1 ring (manual off).

  1. [2]
  2. To remove the HDD from an "old" Xbox 360, press the button on the HDD and remove the HDD. To remove the HDD from a "Slim" Xbox 360, open the HDD door and pull the HDD out of the console. If there is no HDD installed in your console, go to the step 8. [3]
    Advertisement
  3. If it is, turn the Xbox 360 off and go to next step. If the red light flashes again, go to the step 8.
  4. [4]
  5. [5]
  6. If it does, your HDD is defective and should be replaced. If the console is now operating normally, the HDD was loose. You can now enjoy gaming. [6]
  7. Follow the next steps to check the accessories. [7]
  8. [8]
  9. Turn the Xbox 360 off and reconnect one of the accessories then turn the Xbox 360 on. Repeat this with all other accessories. If the Xbox 360 operates normally after reconnecting all accessories, one of them was connected loose. You can enjoy gaming. [9]
  10. Advertisement

Community Q&A

Search
Add New Question
  • Question
    I only get an e68 error when I'm trying to play a certain game.
    Community Answer
    Unfortunately, this means that your game (or console) is defective. If you badly want to play it, you could try replacing the game, or if this occurs with all disc games, a new disc drive, or if this occurs with all games, a new console.
  • Question
    Why does my slow-loading XBox have a red light?
    Community Answer
    That's probably the infamous "ring of death." You can to fix it, your Xbox may just need replacing.
Ask a Question
      Advertisement

      Tips

      • If you have fitted additional modding lights or fans in your console, the console's power system is probably overloaded.
      • Look on the power brick of your Xbox 360. The light on it should illuminate green when the console is on (even when the console shows an error). If the light on the power brick is orange, red or not lit when the console is on, the power brick may be overheated or defective.
      • If one red light is flashing on your Xbox 360 but the TV screen remains blank, you can use these instructions too. You can also check the secondary error code (the method for this is the same as for 3 red lights problem). The code for E68 error is 1010.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always turn the Xbox 360 off before removing or installing the HDD.
      • Do not open the console if it is still on warranty.
      • As Support has ended (for Original Xbox 360s) you'll have to hope it isn't 1 ring. If it is, you can either replace your console or unplug it for 24 hours(Dan told me about the 24 hour thing.)
      Advertisement

      Things You'll Need

      • A good memory
      • Another device that can browse the Internet(optional)
      • Lots of money(if one ring on Original Console)

      About This Article

      Thanks to all authors for creating a page that has been read 251,739 times.

      Did this article help you?

      Advertisement