How to Grow Hemp

Co-authored by Tony Robinson and Hunter Rising

Last Updated: October 6, 2024 References

Hemp is a hardy plant used for textiles, paper, animal feed, and much more. While hemp is typically grown for industrial purposes, it’s also a plant you grow on your own. After planting the seeds in the spring and caring for them through summer, you can harvest the fibers and seeds to use. But before you start a crop, make sure to check your local laws to see if it’s legal to grow hemp in your area!

Part 1

Part 1 of 4:

Planting Seeds

Download Article

1
Plant hemp seeds in late spring. Wait until after the last frost to plant hemp seeds. Check the temperature 1 inch (2.5 cm) deep with a soil thermometer to see if it’s above 50 °F (10 °C). Once the temperature has been consistent for a few days, you can plant your seeds.
- Check the estimate for your last frost date here: https://www.almanac.com/gardening/frostdates .
- Hemp grows best when the outdoor temperature us between 60–80 °F (16–27 °C).
2
Grow hemp in a field with well-aerated soil with a pH between 6-7.5 . Check the pH of the soil with a probe or paper test strips to see if the soil has the right growing conditions. Break the soil up using a hoe or tiller to aerate it. While hemp grows in most soils, poorly-drained soil could cause damage to your plants.
- Test the drainage by digging a 1 × 1 × 1 ft (30 × 30 × 30 cm) hole and filling it with water. Time how long it takes for the water to completely drain and if it’s longer than 1 hour, find a different location.
- It’s easier to find a place with healthy soil conditions rather than amending your existing soil.
Advertisement
3
Put the seeds ³ ⁄ ₄ – 1 ¹ ⁄ ₄ inches (1.9–3.2 cm) deep. Use a seed drill attached to a lawnmower or tractor to space your seeds evenly and cover them with soil. Pour the seeds into the hopper and let the machine do the work for you. ^{[1]
X
Research source} The machine will also bury the seeds to the correct depth so birds and pests can’t get to them.
- Keep the seeds closer together if you want to grow hemp for fibers since this will make them grow up rather than branch out.
- Spread the seeds further apart if you want to harvest seeds. This encourages the plants to branch out and grow shorter.
- Clean the machine after you use it.
- Ask local farm machinery stores to see if they have seed drills available to buy or rent.

Part 2

Part 2 of 4:

Caring for Your Crops

Download Article

1
Water your hemp 12–15 in (30–38 cm) throughout the growing season. Check the moisture of the soil by sticking your finger down to the first knuckle. If it feels dry and doesn’t rain, water the hemp until the soil is damp 1–2 inches (2.5–5.1 cm) deep. Watering is the most important within the first 6 weeks of growth while the plant is still young. After that, hemp is drought-resistant and can survive without water for a few days.
- Use an irrigation system if you’re growing a large hemp crop.
Work on a warm, dry day so the fertilizer doesn’t stick to the plants, and only apply fertilizer once right after the seeds have germinated. Put the fertilizer down between the rows of hemp rather than directly on the plants. Water your hemp immediately after you apply the fertilizer so it absorbs into the soil. ^{[2]
X
Research source}
3
Spray a pre-emergent herbicide on your hemp. Though most hemp crops will block any weeds from growing, use a garden sprayer filled with pre-emergent herbicide on your hemp once it germinates. This helps protect your plants while they’re still growing. ^{[3]
X
Research source}
- As of 2018, there are no herbicides or pesticides officially registered to use on hemp in the United States.

Part 3

Part 3 of 4:

Harvesting Hemp Fibers

Download Article

1
Collect the stalks with a sickle. as soon as seeds start to develop. Cut the stalk as close to the ground as you can to get the most fibers. If you have a small crop, use a handheld sickle in a back and forth motion to slice the stalks. For larger crops, consider buying or renting a sickle-bar attachment for a tractor. ^{[4]
X
Research source}
- Sickles are curved blades that can be purchased at gardening or farm care stores.
2
Leave the stalks in the field for 5 weeks. Pile the stalks on top of one another so the outer shell can rot slightly. During this time, microbes and moisture will work to separate the bonds that hold the stems together. This process can take up to 5 weeks. ^{[5]
X
Research source}
- Letting the stalks rot is known as “retting.”
- Retting will not occur below 41 °F (5 °C) or above 104 °F (40 °C).
3
Dry the stalks in a cool, dry area. until they have a moisture level of 15%. Stand the stalks up on end and separate them so they can completely dry out. Use a moisture meter to figure out how much water the stems are still retaining. Once the stems are below 15% moisture, the fibers can be harvested. ^{[6]
X
Research source}
- Moisture meters can be purchased online or from your local gardening stores.
4
Use a decorator to separate the fibers. A decorticator is a machine with 2 rollers that break off the exterior pieces of the hemp stalk. After turning the machine on, feed 1-2 stalks of hemp at a time through the rollers. The fibers will come out on the other side of the machine where you can then collect them. ^{[7]
X
Research source}
- Ask your local farm machinery store if they have dedicators you can purchase or rent.

Part 4

Part 4 of 4:

Collecting Hemp Seeds

Download Article

1
Harvest hemp seeds with a sickle after 16 weeks. Feel the seed pods near the flowers to see if they are hard to the touch. At this point, most of the leaves will have fallen off of the stalk. Hold the top of the stalk and cut just below the lowest seed pod with a sickle.
- In the United States, harvest usually takes place in October.
- Leave any fallen leaves in the soil to use as compost for next year.
2
Thresh the seeds onto a tarp. Lay a tarp down in a well-ventilated area so it lays flat on the ground. Hold the stems in your non-dominant hand and then hit them with a baseball bat or stick to break the seeds off over the tarp. Once you’ve threshed all your crops, gather all the seeds in the center of the tarp.
- If you are working with a large crop, use an industrial machine thresher.
3
Winnow the seeds to remove any residue. Transfer the seeds into a 5 US gal (19 L) bucket. Hold the bucket 1 foot (30 cm) over a second empty bucket and pour the seeds into it. When you do this, any residue from the stem will blow away. Pour the seeds back and forth 6-10 times to completely clean them. ^{[8]
X
Research source}
- If there isn’t a breeze, point a fan at the buckets when you pour them.
- Use an industrial winnower if you’re working with a large crop.
4
Keep the seeds in an area between 32–40 °F (0–4 °C). Store the seeds in a large container sealed with a lid. Keep the container in a large fridge or in a cool area so the seeds don’t germinate. Otherwise, they may burst and become germ infested.
- You can keep seeds in a burlap sack if they have a moisture level less than 12%.

Expert Q&A

Search

Add New Question

Question

Is hemp a strain of marijuana?

Tony Robinson
CBD expert
Tony Robinson is a CBD Expert & Content Writer at King Buddha. He has over 20 years of experience as a writer specializing in cannabis, CBD, and supplements. He is an expert in sharing well-researched information on the ways that CBD can improve well-being and the growing legality and accessibility of CBD products. Tony has a Master's in Creative Writing from New York University.

Tony Robinson

CBD expert

Expert Answer

While they are both cultivars of the Cannabis sativa species, hemp and marijuana have different chemical makes-ups and applications. The amount of THC is the main distinction between the two: cannabis plants classified legally as hemp have a THC content of 0.3% or less, whereas cannabis plants classified legally as marijuana have a THC content of greater than 0.3%.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 2
Question

Where can I purchase hemp seeds?

Community Answer

Hemp seeds can be bought online, or bought at your local gardening store.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 8 Helpful 45
Question

How long does it take to grow hemp?

Drew Hawkins1

Community Answer

It takes a few weeks for the seeds to sprout and grow into healthy seedlings. But you can harvest hemp as soon as the seeds start to develop, which takes about 4 months. If you harvest them sooner, the stems won't be as sturdy and fibrous.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 13

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Check with your local government to see if growing hemp is legal in your area.

Thanks
Helpful 4 Not Helpful 0
Hemp can only be grown in the United States for commercial and industrial use, but not for personal use.

Thanks
Helpful 6 Not Helpful 2

Things You’ll Need

Soil thermometer
pH tester
Hoe or tiller
Seed drill
Fertilizer
Garden sprayer
Herbicide
Sickle
Moisture meter
Dedicatory
Tarp
Bat or stick
2 large buckets
Storage container with a lid

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

Log in

How to Grow Hemp

Steps

Planting Seeds

Caring for Your Crops

Harvesting Hemp Fibers

Collecting Hemp Seeds

Expert Q&A

Video

Tips

Warnings

Things You’ll Need

You Might Also Like

Expert Interview

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories