How to Make Blinds

PDF download Download Article
PDF download Download Article

Blinds make for great window coverings and decorations, but store-bought ones can be expensive. Save money by making your own at home. You can make a basic blind by sewing together fabric and fabric lining. To roll up the blinds, repurpose parts from old store-bought ones or sew dowel rods onto the fabric. Put the finished blinds on the wall for a functional and decorative way to enhance any room.

Method 1
Method 1 of 3:

Cutting and Sewing Fabric

PDF download Download Article
  1. Use a tape measure to take the measurements, then write them down so you have them for later. Remember to measure around the window frame instead of the glass. The material needs to be bigger than the actual window to cover it up.
    • If you’re planning on mounting the blinds outside of the window, measure the entire area you want the blinds to cover. They have to be a little longer than inside-mounted blinds to overlap the entire window.
    • If you’re planning on covering multiple windows, take measurements for each one.
  2. The fabric will cover the blinds, so choose a pattern you like. Pick something with a double-sided pattern or sew pieces of fabric together so the front and back both look appealing. Fabrics that are 100% cotton or a cotton and polyester blend work best for this project. Once you have a good piece of fabric to work with, spread it to press out the wrinkles.
    • Canvas and decorative cotton are a few good choices for blinds. Stiffer fabric rolls up better. If you wish to use a softer material, layer it over something like lining fabric.
    • Visit craft stores to see what kinds of fabrics they have available or look online to find different patterns. Craft stores also carry most of the other supplies you need.
    Advertisement
  3. The fabric actually has to be a little longer than your measurement to account for the hems you add later. Add an extra 2 in (5.1 cm) to the fabric’s length and width to account for this. Mark the final dimensions on the fabric with a pencil. This cut of fabric is all you need for a basic blind that hangs flat against a traditional blind headrail. [1]
    • Keep in mind that the length depends on how you plan on hanging the blind. Cut the blinds about 12 in (30 cm) longer if you're going to attach them to rollers instead of flat headrails. Leave them about 2 in (5.1 cm) wider than the window to account for the hem.
    • Factor in an extra 2 in (5.1 cm) to the length if you plan on making a top hem. Add another 1 ⁄ 2  in (1.3 cm) if you’re going to staple the blind to a mounting board.
    • For example, if you have a 72 in (180 cm)-long window, the fabric needs to be at least 74 in (190 cm) long to fit well on a blind headrail. Make it 84 in (210 cm) if you’re using a roller instead.
  4. After transferring the window measurements to the fabric, trim away any excess. The cutting process is trickier than you think since one slip could throw off your entire blind. Work slowly, cutting in straight lines to keep the fabric looking as even as possible.
    • Remember that any creases and wrinkles could throw off your measurements. Make sure you iron them out if you notice any before you cut.
  5. Lay the fabric flat with the front side face down. Pick up the fabric on one of the longer ends, fold it over by 1 ⁄ 2  in (1.3 cm), and then fold it over again. Crease it to flatten it on top of the fabric. Repeat the process on the opposite side of the fabric to create the second hem.
    • Make sure you’re working on the left and right sides of the blind. These hems go on the longer sides of the fabric.
  6. Sew the hems in place using a needle and thread. Put some pins through the hem in order to fasten it tightly against the fabric. To make the hems stronger, sew them in place with zigzag stitch . This kind of stitch not only prevents the hem from fraying, but it adds a little more artistry to your finished blinds. If you’re not worried about that, you can finish it with a straight stitch or another alternative.
    • You could use a sewing machine if you have one. Another option is to stick the fabric together with hemming tape if you don’t like sewing.
    • If you’re using hemming tape, fold the fabric on top of it and iron the hem to secure it. Hemming tape isn’t as durable as sewn hems and can come undone in the wash.
  7. The bottom hem is a little bigger than the side ones. To make it, fold the fabric up by 1 ⁄ 2  in (1.3 cm) first and press it flat. Then, fold it up by another 1 1 ⁄ 2  in (3.8 cm). After flattening it, sew it to secure it in place. [2]
    • You could also add another piece of hemming tape if you don’t wish to sew.
    • If you’re making your own hanging mechanism, consider wrapping a piece of 1 in × 2 in (2.5 cm × 5.1 cm) wood in the hem. It needs to be as long as the blind is wide. Use craft glue to secure it.
    8. Advertisement
Method 2
Method 2 of 3:

Using Existing Blinds

PDF download Download Article
  1. The hardest part of making blinds is hanging them, but there is an easy way to get around that problem. You can take advantage of the headrail or roller from an existing set of blinds. The headrail attaches to the wall through a couple of brackets that fasten with screws. If you have used blinds before, you may even have one ready to repurpose.
    • You can use old blinds if you have them or get new ones. Try looking for some mini blinds that fit your window. Cheap ones are available at most hardware stores.
  2. Leave the blinds whole for now, setting them face up on the table. Spread a line of bottled craft glue across the front side of the headrail. As soon as you are done, pick up the headrail, taking care not to smear the glue. Line up the headrail with the top edge of the fabric before pressing it in place.
    • The glue dries quickly, so be sure to attach the headrail to the fabric right away.
    • If you don’t have a good headrail, try using a piece of 1 in × 2 in (2.5 cm × 5.1 cm) wood that is as long as the fabric is wide. Wrap it up in the fabric to create another seam. Keep in mind that the fabric needs to be cut another 2 in (5.1 cm) longer than normal for the additional hem.
    • If you make your own headrail out of wood, attach it to the wall or a headrail board on the wall. Another option is to fit it inside the brackets of an open headrail, if possible.
  3. Turn the blinds over with caution, keeping the fabric pressed up against the headrail. On the backside, look for 2 different types of cords. The one you need is a thinner cord with smaller connectors running to each slat, similar to a ladder. Pull the cord up to check for the connecting strings that tie to the holes in each slat.
    • The thicker cords running down the length of the blinds are pull cords. You don’t need to cut them, so separate them from the ladder cords.
  4. Spread the slats to find where the cord connects to each one. Use a sharp pair of scissors to cut the small connecting ladders binding the cord to the slats. You will need to do this for each slat, which takes some time, but make sure you free all of them. Pull the cord away when you’re done. [3]
    • Some blinds can have as many as 3 of these smaller ladder cords, so check your blinds thoroughly. Remove all of them.
  5. Look for a round, white cap in the center of the lower bar on the blinds. The pull cord attaches to it, so untie the cord. Once you have it free from the cord, nothing will be holding the bottom bar in place. Set the cap and bar aside.
    • Without the cap and bottom bar serving as an anchor, nothing holds the blinds in place. Keep in mind that they will slide right off if you lift the blinds at all.
  6. The number of slats you leave in place depends on the length of your blind. Generally, 5 slats are enough, but you can adjust this to change how your blinds fold up. Measure out the positioning using a ruler or tape measure, then slide the other blinds into position on the fabric. Keep them well-spaced so your blind rolls up smoothly later. [4]
    • For example, if your fabric is 70 in (180 cm) long, position 5 1 in (2.5 cm)-wide slats 10 in (25 cm) from one another.
    • Start from the bottom when adding slats. If you’re positioning slats 10 in (25 cm) apart, set the first slat 10 in (25 cm) above the bottom edge of the fabric.
  7. Start with the top slat and stand it on one edge as you add the glue. Slather a line of glue all the way across the slat, avoiding the pull cords still attached to it. Repeat this with the remaining slats to stick them in place. Press each slat down firmly against the fabric before you’re finished to ensure they stay put. [5]
    • If you glue the pull cords to the fabric, you won’t be able to roll up the blind later. Take care to avoid getting any glue on them.
  8. Slide the bar back into place, slipping the ends of the cords through its holes. Tie a knot on the end of each cord to keep it from falling out of place. When you’re done, push the caps back onto the bar to cover the holes and prevent the knotted cords from coming out.
  9. Stand the bottom bar up on its side to protect the hem from fraying while you’re using the blind. Spread another bead of craft glue across its length, then push the fabric to its underside. Hold it there for up to 10 minutes to give the glue plenty of time to dry. [6]
    • The bottom bar gives the blind some weight so it’s easy to pull down and roll back up. It’s worth adding a piece of wood there if you don’t have one to repurpose from old blinds.
  10. Most store-bought blinds come with the brackets you need to hang them. If you don’t already have brackets in place, use some 2 in (5.1 cm) wood or drywall screws to attach them to the wall. Position the brackets above the window or window frame. When you’re done, push the headrail into the mounting clips on the bracket to hang and enjoy your new blinds. [7]
    • The way you mount the blinds may vary a little depending on whether they are inside or outside-mounted.
    • For stability, screw the brackets to the support beams in the wall. Use a stud finder that beeps when it passes over the beams.
    • If you need mounting brackets or screws, shop online or visit a hardware store.
    11. Advertisement
Method 3
Method 3 of 3:

Making Blinds From Scratch

PDF download Download Article
  1. Cut the fabric and hem it like you normally would, then flip it over. Measure up 8 to 12 in (20 to 30 cm) from the bottom of the blind and mark the spot with a fabric marker. Do this 4 more times, spacing the marks out evenly along the length of the blind. These spaces will allow the blind to fold up when it’s on the wall, so keep the spaces nice and even. [8]
    • Measure the length of the blind first if you need to in order to space the marks evenly. You could make room for an extra dowel if your blind is very long or remove one if it is short.
    • You can leave extra space on the top of the blind. It doesn’t have to be the exact same size as the other spaces you measured since that part will be used to hang the blind.
  2. Measure the distance between the left and right hem on the fabric, then begin cutting strips to the same length. Use fabric lining to make sturdier pockets, although regular fabric is fine too if you have some to spare. You will need a strip for each dowel. Cut them about 2 in (5.1 cm)-wide for pockets that fit most dowels. [9]
    • You can adjust the size of the pockets as needed to fit the dowels you plan on using. A 2 in (5.1 cm)-wide pocket is generally fine, although you could get the dowels ahead of time and adjust for them.
  3. The easiest way to make the pockets is with long pieces of hemming tape. Set the tape on the fabric strips and use an iron to get them to stick. Then, spread the strips out along the width of the blind according to the marks you made. Work carefully to iron the long edges of the fabric, leaving the shorter ends open to form the pockets. [10]
    • You could also stitch each strip to the fabric. It works better if you backed the fabric with lining since that prevents the stitching from showing on the front side of the blind.
    • If you attached a liner to the back of the fabric, try turning the blind inside out. Secure the strips and dowels, then turn the blind inside-out to hide them.
  4. Get 3 ⁄ 4  in (1.9 cm) wood dowels that are the same length as the pockets you made. Simply slide a dowel into each of the pockets to create the support system for your blind. The dowels are a simple, easy way to string up custom blinds. Keep them well-hidden in the pockets so they don’t mess up the overall appearance of your new blind. [11]
    • If you’re not a big fan of sewing, you could glue wooden strips to the back of the blind. You don’t even need to iron on pockets if you don’t want them, although they are still useful for hiding the supports.
    • Most craft stores sell dowels and the other supplies to finish the blinds. Check online if you can’t find what you need.
  5. Install the blinds over the window using wood or a headrail. If you don’t have a headrail from another set of blinds, install a wood header above the window. Get a 1 in × 2 in (2.5 cm × 5.1 cm) piece of wood that spans across the window. Then, install it in place with some 2 in (5.1 cm) drywall screws. Add the screws about every 12 in (30 cm) across the center of the wood. [12]
    • This installation is meant for outside-mounted blinds. For inside-mounts, attach a small wood board to the upper edge of the window frame if it will support it.
    • Remember to attach the board to the support beams in the wall for stability. The weight of the blinds could cause it to fall off if it isn’t firmly anchored to the wall.
  6. Wrap the top edge of the blind over the board you installed. That will wrap about 1 ⁄ 2  in (1.3 cm) of fabric over the board. Then, use a staple gun to easily secure the fabric to the wood. Space the staples out about every 2 in (5.1 cm) to keep the blind well-secured whenever you need to roll it up. [13]
    • Another way to do this is by making a hem by rolling a board in the fabric. Glue it in place, then screw the board to the wall. You won’t need to add a separate board to hang the blind.
  7. Position the eye screws about 2 in (5.1 cm) from the ends of the wood board. Twist them clockwise by hand until they’re all the way into the wood. Then, position an extra eye screw directly in the center of the wood. It will be an even distance from the other screws. [14]
    • You could add more screws for extra stability if you think you will need them to support large or heavy blinds. Try spacing the screws out evenly, such as 10 in (25 cm) apart from one another.
  8. The eye screws serve as a way to string up the blinds, but you need to add them to each individual dowel or slat. Keep the eye screws level with the ones you installed on the headrail. It’s slow work, but get them all set up so your blind rises and falls with the smoothness of any store-bought one.
    • Turn these eye screws so the heads are positioned horizontally. That means the openings face the top and bottom of the blind so you are able to run cords through them.
    • Another option is to sew plastic rings onto the dowel pockets you made. If you hid the pockets inside the lining of the blind, you will need to add rings this way to string up the blinds.
  9. You will need to cut a separate length of cord for each column of eye screws you set up. Run the cord from the top of the blind to the bottom, knotting it on the bottom eye screw. Keep in mind that the cords need to be about 1 1 ⁄ 2  in (3.8 cm) times longer than the blinds, although this will vary depending on how you mount them. When you’re done, cut the excess length off. [15]
    • Run all of the cords through the top eye screws and to the right. The cord on the left will go through all of the eye screws you have there. Let the cords hang from the side of the blind or install an extra eye screw beneath the headrail to hold them.
    • The length of cord you need will depend on the length of your blinds and how long you want the pull cord to be. If you’re unsure, keep the cords long at first and cut away the excess later.
    • You can buy replacement pull cords or a cord roll. Check online or at hardware stores.
  10. A metal cleat is like a wall rack for the cord to keep blinds positioned where you want them. It will come with the screws you need to attach it to the wall. Put it to the right of the blinds, keeping it near the headrail. Then, tie all of the cords together to create a pull cord that fits in the cleat.
    • When you need to reposition the blinds, take the pull cord out of the cleat. When you’re done, put the cord back to hold the blinds still.
    11. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I remove wrinkles from fabric curtains?
    Raymond Chiu
    House Cleaning Professional
    Raymond Chiu is the owner of Maid Sailors Cleaning Service, offering affordable residential and office cleaning services. Since its founding in 2014 in New York City, Maid Sailors has expanded to several cities, including Boston, Chicago, and Austin. The company has earned a reputation as one of the most reliable and best cleaning services in the industry.
    Raymond Chiu
    House Cleaning Professional
    Expert Answer
    First thing you can do is check the label to see if they’re safe to iron. The label will tell you the best way to handle the fabric. If ironing is okay, set your iron to a low heat—this keeps the fabric safe from damage. Lay the curtain flat on an ironing board or a clean table, and press the iron gently from the top of the curtain to the bottom. You can also use the steam option if your iron has that function.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    How can I make a blind that keeps the heat out of the room sufficiently?
    T. Chinsen
    Top Answerer
    Home improvement stores carry Mylar that allows light in, but will reflect heat out. This layer can be added to the window rather than the blind. Any fabric or material with metallic fibers can reduce heat but may not be as efficient as Mylar. Cost will be a factor in deciding what material to use for the area(s).
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 5
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • For thicker blinds, sew equally-sized pieces of fabric together. You could get something soft like fabric lining to put over the back side of the blinds.
        Thanks
        Helpful 1 Not Helpful 0
      • If you’re good at sewing, add pockets to the back of blinds. Slide the dowels or slats in there to hide them.
        Thanks
        Helpful 0 Not Helpful 1
      • If you’re looking for an easy way to hang up a fabric blind, try slip stitching plastic rings to its back end. Run the pull cord through the rings so you can raise and lower the blind,
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Cutting and Sewing Fabric

      • Measuring tape
      • Pencil
      • Scissors
      • Iron
      • Fabric
      • Thread or hemming tape
      • Needle or sewing machine
      • Fabric lining (optional)

      Using Existing Blinds

      • Blind headrail or roller
      • Blind slats or wood strips
      • Craft glue
      • Scissors
      • Stud finder
      • Mounting brackets

      Making Blinds From Scratch

      • 3 ⁄ 8  in (0.95 cm) wood dowels
      • Hemming tape
      • Iron
      • Staple gun
      • 1 in × 2 in (2.5 cm × 5.1 cm) wood or headrail
      • Cordless screwdriver
      • Stud finder
      • 2 in (5.1 cm) drywall screws
      • Eye screws or plastic rings
      • Blinds cords
      • Metal cleat

      You Might Also Like

      How to
      Measure Fabric for Curtains
      How to
      Make Roman Blinds
      How to
      Repair Vertical Blinds
      How to
      Hang Pencil Pleat Curtains
      How to
      Make Eyelet Curtains
      How to
      Make a Roman Shade
      How to
      Make Curtain Tiebacks
      How to
      Make Tab Top Curtains
      How to
      Line Curtains
      How to
      Sew Sheer Curtains at Home
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about cleaning, check out our in-depth interview with Raymond Chiu .

      References

      1. ↑ https://www.youtube.com/watch?v=NxgHJO993Rk&feature=youtu.be&t=299
      2. ↑ https://www.youtube.com/watch?v=NxgHJO993Rk&feature=youtu.be&t=369
      3. ↑ https://www.youtube.com/watch?v=r7QVylIWx3c&feature=youtu.be&t=87
      4. ↑ https://www.youtube.com/watch?v=r7QVylIWx3c&feature=youtu.be&t=105
      5. ↑ https://www.youtube.com/watch?v=hWU1w0v6q9Y&feature=youtu.be&t=160
      6. ↑ https://www.youtube.com/watch?v=hWU1w0v6q9Y&feature=youtu.be&t=104
      7. ↑ https://www.prettyhandygirl.com/ringing-in-new-year-hanging-new-blinds/
      8. ↑ https://weallsew.com/make-roman-shade-tutorial/
      9. ↑ https://www.youtube.com/watch?v=g3VW44HvdfM&feature=youtu.be&t=292
      1. ↑ https://www.youtube.com/watch?v=g3VW44HvdfM&feature=youtu.be&t=383
      2. ↑ https://weallsew.com/make-roman-shade-tutorial/
      3. ↑ https://www.youtube.com/watch?v=8VWojBKyawk&feature=youtu.be&t=1149
      4. ↑ https://www.youtube.com/watch?v=g3VW44HvdfM&feature=youtu.be&t=714
      5. ↑ https://www.idealhome.co.uk/diy-and-decorating/how-to-make-a-roman-blind-craft-idea-85817
      6. ↑ https://www.idealhome.co.uk/diy-and-decorating/how-to-make-a-roman-blind-craft-idea-85817

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 95,920 times.

      Did this article help you?

      Advertisement