PDF download Download Article PDF download Download Article

Upholstery piping is found on a variety of sewing projects, from small pillows to couches. It’s the border of fabric that’s stitched to the edges of upholstery, often in a contrasting color. Within the fabric is a length of cord known as filler cord, welting, twist cord, or piping cord. If you’re making your own upholstery piping, you’ll need to choose the fabric and cord that suits your needs, before cutting and stitching them to the right length. Note that you can save time by using bias tape rather than cutting your own fabric.

Part 1
Part 1 of 4:

Choosing Your Fabric and Cord

PDF download Download Article
  1. The length of fabric and cord you need depend on your specific project. Measure the length of each side the piping is meant to cover. For example, if you’re adding piping to a pillow, you’ll want to measure the length of each side, including the corners.
    • If your piping needs to go around corners, you’ll want to add an inch (2.5cm) per corner to the total length of fabric and cord you’ll need. [1]
  2. Piping cord is made of a few different substances, but for the purposes of upholstery you need tough cord. You should choose cord made of plastic or hard foam. They’re more resistant to the wear and tear that comes with upholstery than softer options.
    • If you’re using a template that specifies a width for your cord, follow it. Otherwise, the width largely depends on your preference.
    • You don’t need to worry about color or pattern when choosing your cord, since it will be covered by fabric. [2]
    Advertisement
  3. The kind of fabric you choose is entirely up to you. Maybe you want piping that contrasts vividly with the upholstery you’re adding it to, whether through color or pattern. You might instead want something more subtle that’ll blend in with your upholstery. Either way, pick a fabric that’s close in material to your upholstery; the design and color are up to you.
    • Your upholstery piping should be somewhat similar to the upholstery itself for a more uniform look, especially when considering the material. For example, if your upholstery is polyester, your piping should match the fabric.
    • When choosing your fabric, keep the placement of your piping in mind. If the area sees a lot of wear and tear, you’ll want tougher fabrics. [3]
  4. Advertisement
Part 2
Part 2 of 4:

Cutting Your Fabric into Strips

PDF download Download Article
  1. The width of the strips will be equal to twice the width of your cord plus twice your seam allowance. For instance, if your cord and seam allowance are each ½” (1.3cm), the width of your strips will be equal to 2 inches (5.1cm).
    • The seam allowance is the space between the seam and the end of the fabric. It allows pieces of a pattern to sit together properly. [4]
  2. The selvage is the small strip at the end of a square of fabric that bears the manufacturer’s name. As you bring an opposite corner of the fabric towards this strip, you’ll create a 45 degree fold in the fabric, also known as the bias.
    • While the bias is technically any diagonal line on your fabric, the true bias goes from the selvage to the opposite end of the fabric, intersecting with the grain. [5]
  3. Run the finger along the line to make a crease in the fabric. Unfold the fabric and use a sharp pair of scissors to cut along the the crease. You’ll be cutting the fabric on the bias. Cutting your fabric this way will make for smoother piping than cutting straight strips.
    • Cutting along the bias leaves you with fabric that’s more pliable and less likely to fray at the edges. [6]
  4. If using the same example as above, you want to measure a distance of 2 inches (5.1cm) away from the cut you’ve just made. Use a fabric pencil and ruler to draw a parallel line marking the other edge of the strip. Use your scissors to cut along this line.
    • Repeat this process until you have enough strips for the length of your cord. [7]
  5. Advertisement
Part 3
Part 3 of 4:

Stitching Your Strips Together

PDF download Download Article
  1. Lay the strips right side up; you should see the ends of the strips passing each other. One should be vertical, the other crossing it horizontally. Use a straight stitch to sew the strips together. The stitch should go at a 45 degree angle, parallel to the horizontal strip’s diagonal edge. You’ll be able to turn multiple strips into one long section of fabric. [8]
  2. If using a standard ½” (1.3cm) seam allowance, you’ll want to leave just that amount of fabric past the stitch. You can use a fabric pencil to mark a line on the fabric before cutting.
    • Pressing the seams open after cutting will make the two strips into one long section. [9]
  3. For smaller projects, you might only need to do this a few times. However, if you’re dealing with upholstery on larger furniture such as a couch, you’ll have to connect several strips together. [10]
  4. Advertisement


Part 4
Part 4 of 4:

Sewing in the Cord

PDF download Download Article
  1. Once your strips have all been sewn together, you’ll want to lay your piping cord in the middle of it, following the length. Be sure to place the cord on the wrong side of the fabric. After folding the fabric over, make sure to hold it tightly. The edges should line up together nicely. [11]
  2. Place the pins perpendicular to your piping, piercing through both sides. The fabric will stay curled around the cord as you stitch. The pins should be small enough that they don’t tear through your fabric. [12]
  3. A zipper foot will let the needle get as close as possible to the cord without cutting through it. Slowly push your piping through the sewing machine, removing pins as you get near them.
    • The stitching should run parallel to the cord.
    • When you install the upholstery piping, you’ll sew the ends shut. For now, you don’t need to worry about them. [13]
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You’ll Need

      • Ruler
      • Scissors
      • Fabric
      • Piping cord
      • Pins
      • Sewing machine
      • Zipper foot

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about sewing, check out our in-depth interview with Maudy Paden .

      About This Article

      Thanks to all authors for creating a page that has been read 62,091 times.

      Did this article help you?

      Advertisement