PDF download Download Article PDF download Download Article

The secret to full skirts and gowns is a petticoat. Unlike a crinoline cage or hoopskirt, which is made from rows of interconnected hoops, a petticoat is composed of layers of gathered fabric. Store-bought petticoats can get very expensive, and there is no guarantee that they will fit the length of your skirt and dress. Luckily, it is easy to make a petticoat at home.

Part 1
Part 1 of 4:

Measuring and Cutting the Fabric

PDF download Download Article
  1. This should be enough for most petticoats. Crinoline is stiff and typically comes in white, although sometimes you can find it in black too. It is great if you want structure and volume. Tulle comes in more colors, but it isn't as stiff as crinoline. It's a better option if you want something that looks pretty. [1]
  2. Watermark wikiHow to Make a Petticoat
    Find the skirt or dress that you want to wear over the petticoat. Measure the skirt from the waist seam down to the bottom hem. Subtract 1 inch (2.5 cm) and remember this new measurement; you'll use it in the next step. [4]
    • If you are wearing the petticoat with a dress that does not have a waist seam, measure down from the narrowest part of the waist instead.
    • Petticoats are typically 1 inch (2.5 cm) shorter than the skirt or dress worn over them.
    Advertisement
  3. Watermark wikiHow to Make a Petticoat
    This will give you the width for each of the 3 tiers on your petticoat. For example, if your skirt is 25 inches (64 cm) long, your petticoat would be 24 inches (61 cm) long. Divided by 3, each tier would be 8 inches (20 cm) wide. After you add 1 inch (2.5 cm) for the seams, the final width will be 9 inches (23 cm). [5]
  4. Watermark wikiHow to Make a Petticoat
    You will need 1 2-yard (1.8-m) piece for the top tier, 1 4-yard (3.7-m) piece for the middle tier, and 2 4-yard (3.7-m) pieces for the bottom tier. You will be sewing the 2 4-yard (3.7-m) pieces together for the bottom tier. [6]
    • Use your width measurement from the previous step for the width of the strips.
    • You will have 4 strips in the end: 1 2-yard (1.8-m) strip and 3 4-yard (3.7-m) strips.
  5. Advertisement
Part 2
Part 2 of 4:

Assembling the Tiers

PDF download Download Article
  1. Watermark wikiHow to Make a Petticoat
    Take 2 of the 4-yard (3.7-m) strips. Sew the narrow ends together using a 1/2-inch (1.3-cm) seam allowance and a straight stitch . Finish the raw edges with a zigzag stitch or an overlock stitch for a nicer touch. When you are done, you'll have a strip that is about 8 yards (7.3 m) long. [7]
    • Match the thread color to the fabric as closely as possible. Backstitch when you start and finish sewing to keep the thread from unraveling.
  2. Watermark wikiHow to Make a Petticoat
    Cut an 8-yard (7.3-m) length of 1-inch (2.5-cm) wide satin ribbon. Fold the ribbon over the bottom edge of your fabric strip and secure it with pins. Sew the ribbon to the strip as close to the edge as possible. Use a thread color that matches the ribbon and a straight stitch. You'll have a 1/2-inch (1.3-cm) ribbon hem when you are done. [8]
    • Remember to remove the pins and to backstitch.
    • For a nicer look, use a ribbon color that matches the fabric.
    • This step is not absolutely necessary, but it will give your petticoat a nicer finish and prevent it from the hem feeling scratchy against your legs. [9]
  3. Watermark wikiHow to Make a Petticoat
    Fold the 8-yard (7.3-m) strip in half. Make sure that the right sides are facing in and the seams are facing out. Sew across the narrow ends using a 1/2-inch (1.3-cm) seam allowance and a straight stitch. Finish the raw edges with a zigzag stitch or an overlock stitch. [10]
  4. Watermark wikiHow to Make a Petticoat
    Take the 4-yard (3.7-m) strip and bring the narrow ends together to form a ring. Sew across them with a straight stitch and a 1/2-inch (1.3-cm) seam allowance. Go over the raw edge using a zigzag stitch or an overlock stitch. [11]
    • This is just like you sewed the bottom tier except that you are not hemming the bottom edge.
  5. Watermark wikiHow to Make a Petticoat
    Fold both of the narrow ends down by 1/4-inch (0.64-cm), then sew them down using a straight stitch. This will give the opening of your petticoat more structure. [12]
    • Alternatively, hem the narrow edges with 1-inch (2.5-cm) wide ribbon, just like you did for the hem of the bottom tier.
  6. Advertisement
Part 3
Part 3 of 4:

Gathering the Tiers

PDF download Download Article
  1. Watermark wikiHow to Make a Petticoat
    Sew the first row using a 1/4-inch (0.64-cm) seam allowance and the second row using a 1/2-inch (1.3-cm) seam allowance. Use a straight stitch and a matching thread color for both rows. Do not backstitch. [13]
    • Use a long stitch length and a low tension on your sewing machine. This will make gathering it easier.
  2. Watermark wikiHow to Make a Petticoat
    Place the middle tier into the bottom tier. Find the bobbin threads from your 2 rows of stitching, then pull on them to gather the fabric. Keep pulling until the gathering edge matches the circumference of the middle tier. Knot and cut the excess thread. [14]
    • Cut the excess thread first to make it easier to manage. Tie the threads together, then trim the rest off.
  3. Watermark wikiHow to Make a Petticoat
    Double-check to make sure that the right sides of the tiers are facing each other first. Since the tiers are already tucked inside each other, all you have to do is pin and sew along the top edge with a straight stitch and a 1/2-inch (1.3-cm) seam allowance. [15]
    • Remember to backstitch and to take the pins out when you are done!
  4. Watermark wikiHow to Make a Petticoat
    Fold the seam against the middle tier. Secure it with sewing pins, then sew across it with a zigzag stitch. This will give you a cleaner finish as well as prevent the seam from scratching you. [16]
  5. Watermark wikiHow to Make a Petticoat
    Sew 2 rows across the top edge of the middle tier. Gather the top edge until it is the same circumference as the top tier. Pin and sew the 2 tiers together with a 1/2-inch (1.3-cm) seam allowance and a straight stitch. Fold the seam against the top tier and topstitch it down with a zigzag stitch. [17]
    • The top tier isn't sewn together into a ring yet. You will have to coil the top tier into a ring and tuck it inside the middle tier to check the size.
  6. Watermark wikiHow to Make a Petticoat
    This includes all of the measuring, cutting, gathering, and sewing. When you are done, tuck 1 petticoat into the other with the wrong sides facing in. Sew along the top edge of the petticoat using a straight stitch or a zigzag stitch to hold them together. [18]
    • You are sewing the petticoats with the wrong sides facing in so that you have a clean finish on the inside and outside of the petticoat.
    • For a more colorful petticoat, consider using different colors for each layer.
  7. Advertisement
Part 4
Part 4 of 4:

Finishing the Petticoat

PDF download Download Article
  1. Watermark wikiHow to Make a Petticoat
    Use the same process as you did for the bottom and middle tiers. Sew 2 rows of stitching, then gather them until the top edges matches your waist measurement. Cut the excess thread off, knot it, then trim it close to the fabric. [19]
  2. Watermark wikiHow to Make a Petticoat
    Choose a 1 to 2-inch (2.5 to 5.1-cm) wide twill tape that matches the color of your petticoat. Cut it 3 to 4 inches (7.6 to 10.2 cm) longer than your waist measurement. You need this extra length so that you will have room for the overlap and hook closures. [20]
    • For a nicer finish, use satin ribbon instead.
  3. Watermark wikiHow to Make a Petticoat
    Fold the narrow ends of your twill tape by 1 4 inch (0.64 cm). Press them with an iron, then sew them down using a straight stitch. [21]
  4. Watermark wikiHow to Make a Petticoat
    Make sure that the left end of the twill tape aligns with the left edge of the petticoat. The right edge of the twill needs to extend past the right edge of the petticoat.
  5. Watermark wikiHow to Make a Petticoat
    Start at the left end of the twill tape and finish on the right. You are sewing past the edge of the petticoat because you want to sew the rest of the twill tape waistband down. [22]
    • Sew as close to the edge of the twill tape as possible.
    • Remember to backstitch and to take out the pins.
  6. Watermark wikiHow to Make a Petticoat
    Add a hook to the underside of the left end of the waistband. Add eyes to the top of the right side of the waistband. The first eye should align with the right edge of the petticoat. If you have enough room, you can add more hooks along the excess, overhanging waistband. [23]
    • Keep the additional eyes 1 inch (2.5 cm) apart. You only need 1 hook, just like on a bra.
    • Sew the hooks and eyes on by hand through the loops at the ends. Alternatively, you can use snaps instead.
  7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How many layers should a petticoat have?
    Alessio Iadicicco
    Apparel Manufacturing Specialist
    Alessio Iadicicco is an Apparel Manufacturing Specialist based in Dallas, Texas. He was the CEO and Co-Founder of MarkersValley, an online apparel and manufacturer sourcing platform that connects luxury fashion brands to a network of highly-vetted, truly Italian manufacturers. After 6 years building MarkersValley, he transitioned into a career as a SBA Lender, currently working as VP of the SBA Business Development Office at U.S. Bank. Through this role, he helps small business owners secure the SBA funding they need to thrive. He holds a Bachelor's degree in Economy and Management of Financial Enterprises from The University of Naples Federico II. MarkersValley has connected fashion brands in over 100 countries and has a network of over 100 independent Italian factories and artisans. MarkersValley has been featured in Forbes, EQ, St. Louis Business Journal, Il Mattino, and Corriere Della Sera.
    Apparel Manufacturing Specialist
    Expert Answer
    You only need 1 layer if the skirt has a traditional fitting or sheath dress shape and fitting. If you'd like to give the skirt more volume, you'll need 2-3 petticoat layers.
  • Question
    What fabric should I use for a petticoat?
    Alessio Iadicicco
    Apparel Manufacturing Specialist
    Alessio Iadicicco is an Apparel Manufacturing Specialist based in Dallas, Texas. He was the CEO and Co-Founder of MarkersValley, an online apparel and manufacturer sourcing platform that connects luxury fashion brands to a network of highly-vetted, truly Italian manufacturers. After 6 years building MarkersValley, he transitioned into a career as a SBA Lender, currently working as VP of the SBA Business Development Office at U.S. Bank. Through this role, he helps small business owners secure the SBA funding they need to thrive. He holds a Bachelor's degree in Economy and Management of Financial Enterprises from The University of Naples Federico II. MarkersValley has connected fashion brands in over 100 countries and has a network of over 100 independent Italian factories and artisans. MarkersValley has been featured in Forbes, EQ, St. Louis Business Journal, Il Mattino, and Corriere Della Sera.
    Apparel Manufacturing Specialist
    Expert Answer
    You can use both elastic and non-elastic fabrics to make a petticoat. For more voluminous petticoats, use a more full-boded fabric like taffeta or tulle.
  • Question
    How much cloth is required to stitch a petticoat?
    Alessio Iadicicco
    Apparel Manufacturing Specialist
    Alessio Iadicicco is an Apparel Manufacturing Specialist based in Dallas, Texas. He was the CEO and Co-Founder of MarkersValley, an online apparel and manufacturer sourcing platform that connects luxury fashion brands to a network of highly-vetted, truly Italian manufacturers. After 6 years building MarkersValley, he transitioned into a career as a SBA Lender, currently working as VP of the SBA Business Development Office at U.S. Bank. Through this role, he helps small business owners secure the SBA funding they need to thrive. He holds a Bachelor's degree in Economy and Management of Financial Enterprises from The University of Naples Federico II. MarkersValley has connected fashion brands in over 100 countries and has a network of over 100 independent Italian factories and artisans. MarkersValley has been featured in Forbes, EQ, St. Louis Business Journal, Il Mattino, and Corriere Della Sera.
    Apparel Manufacturing Specialist
    Expert Answer
    If you're using an elastic fabric, purchase material that's at least 1.2 m (3.9 ft) in length and 1.4 m (4.6 ft) in width. If your dress is made with silk or another non-elastic fabric, your fabric must be 2.4-2.5 m (7.8-9.2 ft) long and 1.4 m (4.6 ft) wide.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • 4 to 5 yards (3.7 to 4.6 m) tulle or crinoline
      • Measuring tape
      • Fabric scissors
      • Sewing pins
      • Sewing machine
      • Thread
      • 1-inch (2.5-cm) satin ribbon
      • 1 to 2-inch (2.5 to 5.1-cm) wide twill tape
      • Hooks and eyes

      About This Article

      Article Summary X

      To make a petticoat, start by purchasing 4 to 5 yards of tulle or crinoline. Next, measure from the waist seam to the bottom hem of the skirt you plan on wearing over the petticoat, and subtract 1 inch. Then, divide this number by 3 and add 1 inch for the seams to get the width for each of the 3 tiers of the petticoat. Once you have all of your measurements, cut the strips of fabric accordingly, and assemble your tiers with a straight stitch and a ½ inch seam allowance. Finally, after the tiers are done, sew them together. To learn how to make a 2 layer petticoat, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 402,397 times.

      Reader Success Stories

      • Rachel Giles

        Jun 26, 2021

        "Informative and encouraging, I completed my task and made a beautiful garment, in this case a really feminine ..." more
      Share your story

      Did this article help you?

      Advertisement