Download Article
Download Article
Move something heavy a short distance using little more than a piece of rope , a stick and something large to attach to. It is useful for moving or removing the stumps of garden shrubs.
Steps
Download Article
-
Wrap the rope around the object to be moved and a large immovable object in one continuous loop. The strength of the rope should be proportionate to the amount of pull that you wish to achieve. The rope can be wrapped more than once and a double or greater wrap is best.- A tree makes a good immovable object to use as an anchor because many trees have rough bark. This means that the rope will not easily slip on the bark and removes the need for skillfully made knots. A simple reef knot, perhaps with a loop so that it is easily undone, will be sufficient. If either object is slippery, the knots used should be designed to be easy to undo and be placed so that they do not slip up or down either one of the objects.
- As you make the loop, it is a good idea to wrap it more than once around the object to be moved, overlapping the rope on itself as you do so. This grips the object firmly. When removing shrubs, start low on the plant but not right at the base. This will give some leverage to stress the roots. If you go too high, the plant will give as you tighten and you will not exert maximum force on the roots.
-
Choose a strong stick that is long enough to reach nearly twice from the middle of the loop to a firm place such as the ground. A smooth strong metal pole is good but any strong stick can be used.Advertisement -
Insert the stiff stick or pole in the middle of the loop. -
Adjust the stick so that one end can be rested on the ground or other firm place. This means that more of the stick is on one side of the rope than it is on the other. -
Place a blanket or other item with a large surface area across the rope. If the rope breaks, this will absorb some of the energy of the rope as it snaps back along its length and reduce the risk of you being hit by it. -
Twist the stick around and around so that it twists the rope around itself. The stick is kept at an angle (of around 30 degrees) to the line of the rope as you do this, allowing the longer end to avoid hitting the ground. The rope will begin to shorten and pull your object towards the anchor. Keep rotating until you have pulled the object as far as you need or the shortening rope will allow.- If you need a rest, the stick can be set at right angles to the rope and positioned against the ground. A slippery 'stick' such as the steel pole shown in the pictures is convenient. As you start twisting, it is easy to slide it through and position it to rest securely. When the lift is under tension, it can spin the stick hard and fast. Be careful to make sure that the stick is secure before releasing hold of it.
- Twisting in this way can generate large forces between the object and anchor allowing quite heavy objects to be moved. If your rope is weak it may break. Stop if the fibres of the rope start to creak heavily or to break. A double rope helps to provide you with more warning of possible trouble. One strand of the rope is likely to be under more stress than the other and will creak or fray before the other.
- Quite large roots and other objects can be removed by this method but it will need to be set up repeatedly if the root is too large to move by hand.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- The lift can be set up again and repeated to move objects longer distances.Thanks
- Two people can work one lift if two sticks are used. Well coordinated, this is safer.Thanks
- Size your ropes and sticks in proportion to the load you plan to move.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- The "stick" needs to be as strong and rigid as possible without fear of breaking under pressure. If the stick breaks while you are twisting it, there is a significant chance of it breaking in a jagged fashion. The combination of this break and the spinning motion caused by the tension can severely injure you.Thanks
- Be very careful to secure the stick when you have the rope under tension before letting go of it. A spinning stick could hit you and injure you.Thanks
Advertisement
Things You'll Need
- Rope
- Stick
- Blanket or other heavy duty sheet of soft material
- Helmet with visor (some protection from snapping ropes)
- Gloves (optional but convenient and safer)
References
- Drawings of parts of the windlass setup and knots
- Related Spanish Windlass knot
About This Article
Thanks to all authors for creating a page that has been read 82,287 times.
Advertisement
