Download Article
A few ways to make your own abacus at home
Download Article
Before there was the calculator, people used the abacus for basic math and accounting. While it’s no longer necessary thanks to smart phones and computers, an abacus is still useful for parents and teachers to help children learn how to count, how to add and subtract, and how to understand decimal places. You can make your own at home with basic materials found at a craft store.
Steps
-
Cut 4 pieces of wood for the frame. For 2 pieces, trim a 3 ⁄ 4 in (1.9 cm) wood board into 11 in (28 cm) sticks using a saw. For the other 2, cut a 1 ⁄ 4 in (0.64 cm) wood board into slightly longer 12.5 in (32 cm) sticks. [1] X Research source
- The local hardware store should be able to cut these for you if you don’t have a saw.
-
Sand the 4 pieces of wood to create smooth edges. Use a medium grit (100 to 150 grit) sandpaper on the cut edges of the wood pieces. [2] X Research source You can also sand down any sharp corners or splintered sections which could be a safety hazard for kids.Advertisement
-
Drill 10 evenly-spaced holes into both of the 11 in (28 cm) pieces. Mark the spots with pencil or marker before drilling to make sure they’re each an inch apart, then use a 1 ⁄ 8 in (0.32 cm) drill bit to create the holes. Only drill halfway through the wood. [3] X Research source
-
Insert the 10 brass tubes into the holes on one 11 in (28 cm) piece. Push them firmly into the holes, twisting as you press to make sure they're secure. A little drop of hot glue in the hole before you insert the tube can add extra hold.
- Instead of brass tubes, you can also use wooden barbecue skewers.
-
Place 10 beads onto each tube. The beads can be any size, material, or color. If you go with wooden beads, you can use acrylic paint to decorate the beads in whatever colors and patterns you'd like.
- Painting beads while they're on a string or skewer makes it easier to coat the entire bead. They'll also dry more evenly and not smear. [4] X Research source
- For an ombre look, choose 10 different shades of one color that will go from darkest to lightest as you move down the abacus.
-
Stick the tubes' other ends into the holes on the other 11 in (28 cm) piece. Don’t forget to press the 2 pieces of wood together gently but firmly to secure the sticks. Again, dabbing hot glue on the ends of the tubes or in the holes before pushing the piece of wood on can help.
-
Attach the top and bottom pieces of wood using screws. Take one of the 12.5 in (32 cm) wood pieces and lay it flat against the tops of the connected 11 in (28 cm) pieces. Drill a pilot hole on each side and screw together to hold. Repeat this on the bottom of the abacus with the other 12.5 in (32 cm) piece to finish the frame.
- Skip the drilling by securing the pieces of wood in place with wood glue instead.
Advertisement
-
Glue 4 jumbo craft sticks together to make a square frame. Use hot glue to hold the sticks securely in place. [5] X Research source You can also buy a picture frame instead and simply remove the backing to skip this step. [6] X Research source
- For a colorful abacus, paint the popsicle sticks with acrylic paint before assembling.
-
Thread 10 beads onto a pipe cleaner, 5 in one color and 5 in another. For example, you’ll have 5 pink beads followed by 5 blue beads on one pipe cleaner. Repeat until you have 10 pipe cleaners with 10 beads each.
- This is a great step for kids to help with to practice their motor skills.
- If you don’t have pipe cleaners, you can use pieces of string or wire.
-
Arrange the 10 pipe cleaners in a row in the frame. They should be evenly spaced and not touching each other so that you can move the beads on each pipe cleaner.
-
Wrap the ends of each pipe cleaner around the sides of the frame. You can use a drop of hot glue under each end to stop the pipe cleaner from slipping down the craft stick. Trim any extra pipe cleaner with scissors and tuck the end neatly around the stick. [7] X Research source
Advertisement
Community Q&A
Search
-
QuestionWhich type of beads should I use?Tina XCommunity AnswerAny type of bead will work. Wooden beads may be the best choice, but it all depends on you. Try to avoid using crafting beads (plastic, colorful ones).
-
QuestionHow to make an abacus with cardboard?LykaCommunity AnswerYou can use cardboard as a good alternative to wood. Get a size that can fit the beads of your choice. Make a frame by cutting a rectangle inside. Stick the thread, wire, or stick with the beads at the edge of the cardboard using glue or another better alternative. To make it sturdy and more presentable, cut another cardboard frame of the same size and cover the side where you stuck the stings/wired/stick in between the two frames. When the glue dries, you can add designs at the frame if you like.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
-
Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Always use the blade guard when sawing. This not only protects your fingers from the saw, it acts a shield to deflect any wood that shoots off.Thanks
- Wear safety glasses when using a saw or drill to protect your eyes from any flying pieces of wood or debris.Thanks
- A push stick can help keep your fingers from getting too close to the saw. You'll push the wood through the table saw with the stick instead of your fingers. [9] X Research sourceThanks
Advertisement
Things You'll Need
Building It with Wood
- 3 ⁄ 4 in (1.9 cm) wood board
- 1 ⁄ 4 in (0.64 cm) wood board
- Table saw
- Sandpaper
- Safety glasses
- Marker or pencil
- Drill
- 1 ⁄ 8 in (0.32 cm) drill bit
- 100 wood beads
- 10 brass tubes or wooden barbecue skewers
- Acrylic paint
- 4 screws
- Wood glue (optional)
- Hot glue gun and hot glue sticks (optional)
Using Pipe Cleaners
- 4 jumbo craft sticks
- Hot glue gun
- Hot glue sticks
- Acrylic paint
- 100 beads
- 10 pipe cleaners
- Scissors
References
- ↑ https://www.youtube.com/watch?v=5pm4aq3bdAU
- ↑ https://www.todayshomeowner.com/video/how-to-choose-the-right-sandpaper-grit-for-the-job/
- ↑ https://www.youtube.com/watch?v=5pm4aq3bdAU
- ↑ https://www.youtube.com/watch?v=5pm4aq3bdAU
- ↑ https://fun-a-day.com/rainbow-math-diy-abacus/
- ↑ https://www.coffeecupsandcrayons.com/how-to-make-an-abacus-at-home/
- ↑ https://www.coffeecupsandcrayons.com/how-to-make-an-abacus-at-home/
- ↑ http://www.makingyourown.co.uk/make-your-own-abacus.html
- ↑ https://www.familyhandyman.com/tools/table-saws/how-to-use-a-table-saw-ripping-boards-safely/view-all/
About This Article
Article Summary
X
To make your own abacus, you can use craft sticks, pipe cleaners, and beads. First, glue 4 jumbo craft sticks together to make a square frame. Once your frame is assembled, thread 10 beads onto a pipe cleaner, making sure the first 5 beads are in 1 color, and the other 5 are in a different color. Repeat this step until you have 10 pipe cleaners, each one with 10 beads on it. Arrange the 10 pipe cleaners in a row, then wrap the ends around the sides of the frame. Use a drop of hot glue under each end of the pipe cleaners to stop them from slipping down the craft stick. To learn how to build an abacus out of wood, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 59,563 times.
Advertisement
