How to Measure for Outside Mount Blinds

PDF download Download Article
PDF download Download Article

Blinds that mount outside of the window opening are perfect if you can't install blinds on with an inside mount. If you want to hang blinds that cover your window completely, taking proper measurements will help you get the right size. First, find the widest point of your window before finding the height at the tallest point. Since outside mounts extend past the window, you'll also need to add additional length to both of your measurements. When you're finished, you'll be able to select blinds that are a perfect fit!

Method 1
Method 1 of 2:

Finding the Window’s Width

PDF download Download Article
  1. Place the end of your tape measure against the left side of your window and extend it to the furthest point on the right side. If your window has trim around it, find the width from the outer edges of the trim instead so it’s completely covered by the blinds. Round your measurement to the nearest 1 ⁄ 8  in (0.32 cm) and write it down so you don’t forget. [1]
    • Be sure to use a steel measuring tape so you get the most accurate measurements.
  2. Take your measurements from the top, middle, and bottom of the window, rounding to the nearest 1 ⁄ 8  in (0.32 cm) if you need to. Make sure the tape measure is level when you take your measurements so they’re accurate. If one of the width measurements you took is longer than the others, use it as the main width to ensure your blinds cover all of the window. [2]
    • Measure every window you’re putting blinds on, even if they look like they’re the same sizes. The actual window dimensions may vary slightly and blinds that fit on one window may not sit well on others.
    Advertisement
  3. If your blinds are the same size as your window, light will leak in from the sides and it won’t cover the opening as well. After finding the widest point on your window, add at least 1 1 ⁄ 2 inches (3.8 cm) to each side, or 3 inches (7.6 cm) total, so the blinds have better coverage. [3]
    • For example, if the width of your window is 36 inches (91 cm), then get horizontal blinds that are at least 39 inches (99 cm) wide.
    • The mounting hardware may be slightly wider than the width of your blinds depending on the type you choose. For example, roller blinds may have hardware that’s 1 inch (2.5 cm) wider than the shades. [4]

    Warning: Don’t get horizontal blinds that extend further than 3 inches (7.6 cm) on each side since it can make your window look too small otherwise.

  4. Vertical blinds need a little more space on either side of the window to help block out the light from outside and give you privacy inside. Once you find the widest point of your window, add 3 inches (7.6 cm) to each side of the measurement, or 6 inches (15 cm) total. Write down the final width for your blinds so you know what size to order.
    • For example, if the width of your window is 36 inches (91 cm), then the overall width of vertical blinds should be 42 inches (110 cm).
    5. Advertisement
Method 2
Method 2 of 2:

Measuring the Height

PDF download Download Article
  1. Place your tape measure against the top edge of the trim above your window and extend it down to the top of the window sill. Make sure the tape measure is perfectly vertical so you get an accurate measurement. Round the height measurement to the nearest 1 ⁄ 8  in (0.32 cm) and write it down so you can remember it later. [5]
    • If you want your blinds to extend past the sill to cover it, then add 3–4 inches (7.6–10.2 cm) to your measurement.
    • Stand on a step ladder if you can’t reach the top of your window’s trim.
  2. Start the tape measure at the top of the window opening and extend it down to the bottom edge. Include an additional 2–3 inches (5.1–7.6 cm) on the measurement you just took so the blinds can extend past the bottom of the window. [6]
    • For example, if the window measures 40 inches (100 cm) tall, then the height of your blinds should be 42–43 inches (110–110 cm).
  3. Start the tape measure against your floor and extend it up toward the tallest point of your window or the trim around it. Make sure the tape measure stays perfectly vertical or else your measurement won’t be accurate. Once you find the distance, cut off 1 ⁄ 2 inch (1.3 cm) so the blinds can easily open and close without scraping against the floor. [7]
    • For example, if the measurement from the top of your window to the floor is 72 inches (180 cm), then the length of your blinds should be 71 1 ⁄ 2 inches (182 cm).
  4. Find the height measurement on the left and right sides of the window before measuring from the center. Make sure each of your measurements is rounded to the nearest 1 ⁄ 8  in (0.32 cm). Choose the longest measurement you took to ensure that your blinds cover the windows completely. [8]
  5. The mounting hardware for your blinds usually hangs above your window and its frame, so your blinds need to be slightly longer than the window. Add 2–3 inches (5.1–7.6 cm) to account for the height between the mounts and the top of the window. [9]
    • For example, if the height you measured was 45 inches (110 cm), then the final measurement for your blinds would be 47–48 cm (19–19 in).

    Tip: You don’t need to include an additional measurement if you plan on mounting the hardware directly to the trim.

    6. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • When you buy blinds, the width will always be listed before the height. [10]
        Thanks
        Helpful 0 Not Helpful 0
      • Check that you have at least 2 inches (5.1 cm) of space above the window so you can hang the mounting hardware. [11]
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Don’t use a cloth tape measure while you’re finding the height and width of your window since it may not be as accurate as a steel one. [12]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You’ll Need

      • Steel tape measure
      • Step ladder

      You Might Also Like

      5 Ways to Make Blinds Go Down
      How to
      Remove Blinds
      How to
      Rethread a Roller Blind Cord
      How to
      Restring Blinds
      How to
      Remove Venetian Blinds
      How to
      Take Down a Roller Blind
      How to
      Cut Blinds
      How to
      Remove Vertical Blinds
      How to
      Measure and Install Roller Blinds
      How to
      Install Blinds
      How to
      Work Blinds
      How to
      Clean Vertical Blinds
      How to
      Cut Roller Blinds
      How to
      Hang Roman Shades
      Advertisement

      References

      1. ↑ https://www.lowes.com/n/how-to/measure-blinds-windows-doors#no_universal_links
      2. ↑ https://youtu.be/LGYAaNLyGGs?t=41
      3. ↑ https://youtu.be/b8-2viz52JA
      4. ↑ https://youtu.be/LGYAaNLyGGs?t=69
      5. ↑ https://youtu.be/b8-2viz52JA
      6. ↑ https://youtu.be/b8-2viz52JA
      7. ↑ https://www.lowes.com/n/how-to/measure-blinds-windows-doors#no_universal_links
      8. ↑ https://youtu.be/LGYAaNLyGGs?t=49
      9. ↑ https://www.lowes.com/n/how-to/measure-blinds-windows-doors#no_universal_links
      1. ↑ https://www.lowes.com/n/how-to/measure-blinds-windows-doors#no_universal_links
      2. ↑ https://youtu.be/NhwJ15pm_NI?t=52
      3. ↑ https://youtu.be/b8-2viz52JA?t=26

      About This Article

      Thanks to all authors for creating a page that has been read 22,359 times.

      Did this article help you?

      Advertisement