A Detailed Guide to Programming Car Keys & Fobs

PDF download Download Article
An easy guide to car key and fob programming
PDF download Download Article

Electronic keys are convenient and protect your vehicle from thieves. Luckily, many of these keys and fobs can be replaced and programmed at home. Order a replacement key through your local auto locksmith or dealership to program a car key without the original. If you already have a master key and want to program a second or third, turn the ignition on and off. Use the unprogrammed key and press any button on its key fob. Your key should work perfectly afterward, but you can take it to a professional auto dealer or locksmith for help if it doesn't.

Things You Should Know

  • Use a master key to program additional keys by inserting the original into the ignition. Hold the lock button and wait for a blinking red light for a successful pairing.
  • To reprogram a key fob, turn on the ignition, press the lock button on the remote, and turn off the ignition. Repeat this process quickly when pairing multiple fobs.
  • Replace your car key’s battery by replacing the button cell battery with a brand-new one. Press any button for a response.
Method 1
Method 1 of 6:

Programming a Second or Third Key

PDF download Download Article
  1. Before you begin, you’ll need at least one master (original) key to program a second. If you’re programming a third key, you’ll need two keys. Consult your owner’s manual for additional steps required by the manufacturer. [1]
    • If you do not have the original car key, contact your local auto locksmith or dealership with proof of ownership so you can get a replacement key. [2]
    • Search your car’s make and model online. You can find the exact steps needed to program keys for your car.
    • Many newer cars have improved transponders in electronic keys. These have to be programmed by a dealer or auto locksmith for your car’s unique anti-theft system.
  2. Put the master key in the slot and leave it alone momentarily. Place the additional keys that need to be programmed where you can easily reach them. You’ll need to move fast to activate the car’s programming mode.
    • If you’re programming two additional keys, make sure you know which key is the master and which is the second or third key.
    Advertisement
  3. Turn the master key in the ignition to activate the car’s electrical system. Don’t start the motor. When power is activated, shut the car off immediately and remove the key from the ignition.
  4. You have about five seconds to remove the master key. Take the second key and put it in the ignition to program it. Again, turn the second key so the car comes on without starting the engine. Turn the key back so the car shuts off.
  5. If you are programming a third key, you’ll have ten seconds to replace the second key with the third. Quickly turn the third key once again to the on position. A second later, turn it back to the off position. Leave the key in the ignition. [3]
  6. Look on your dashboard for the car’s security light. It should stay lit for about three seconds. You may need to press the buttons on the key you wish to program. When finished, remove the key and test it out. [4]
    • If this doesn’t work, try the process again. It’s easy to miss a step or take a second too long. However, after several attempts, refer to your local auto locksmith or dealership for further assistance.
    7. Advertisement
Method 2
Method 2 of 6:

Programming a Key without the Original

PDF download Download Article
  1. If you’ve misplaced or lost your original car key, you must contact your local auto locksmith or dealership with proof of vehicle ownership to order or make a new replacement key. This includes your vehicle’s registration, title, or purchase paperwork. [5]
    • Traditional car keys can be made by your local locksmith, whereas technologically advanced keys like switchblades, transponders, or smart keys may only be replaced through your dealership. [6]
    • Traditional keys may cost up to $10, depending on the make and model of your car. Fobs , transponders, switchblades, and smart keys can vary between $50 to $500. [7]
  2. To program a replacement or single key, insert the key and turn the car on without powering the engine. Lock your doors from the inside. Then, hold the lock button on your key (with it still powering the car) and wait for a blinking red light. [8]
    • Your vehicle's key is reprogrammed when you see a blinking red light. Now, safely remove the key from the ignition.
    3. Advertisement
Method 3
Method 3 of 6:

Programming a Key Fob

PDF download Download Article
  1. Sit in the driver’s seat with the ignition key and the key fob, also called a keyless entry remote. Close all doors. Place the key in the ignition and turn it to the on position. Don’t start the engine. [9]
    • Consult your owner’s manual or online for specific steps for your vehicle. Different manufacturers require slightly different steps to complete the reprogramming process.
  2. Aim the remote at the transmission receiver, typically in front of the car, like the dashboard or above the rearview mirror. Aim the key forward. Hit the lock button within a couple of seconds of turning the key. [10]
  3. Immediately reach for the key in the ignition. Shut the car off. Continue to move quickly. You only have a few seconds before the car’s system resets the commands. [11]
  4. Many cars desync all remotes when you attempt to program a new one. Start at the beginning. Turn on the ignition, press the lock button on the next remote, and turn off the ignition. [12]
    • Reprogram each key right after the last one. If you wait over a few seconds, the car exits programming mode. You’ll have to start over if you wish to program all the remotes.
    • For some cars, you’ll have to repeat the cycle several times to enter programming mode. You may hear the locks click, telling you that this was successful.
  5. Start with the first remote and press it again to make sure it is programmed. If it's successful, the locks should sound. Quickly move to the next remote. Repeat the process for each remote you wish to program. Afterward, you can turn off the ignition and test your remotes. [13]
    6. Advertisement
Method 4
Method 4 of 6:

Programming Fob on a Push-Starter

PDF download Download Article
  1. After entering your vehicle, quickly shut the doors and press the push-to-start button twice. All of the dashboard lights will power on. Immediately press the push-to-start button one more time to power the vehicle down. [14]
    • Some vehicles, like Nissan, have a fob compartment inside the car near the driver’s door jam or under an armrest. Once you locate it, you should be able to find a small button that says “program.” Press this button instead of the ignition. [15]
  2. Switch between the on and off position five times by pressing the button in rapid succession. [16]
    • For Nissans, press and hold any button from your fob’s keychain until the door locks flash.
    • Once you see this, release the programming button. When paired successfully, you should see a steady light on the fob.
    • If not, try again by pressing the program button and holding down any button from your remote for three seconds. [17]
  3. To program one key, grab your fob and press the lock button once until you hear a single click from your headlights. Wait a few more seconds; another two clicks should sound. This means your remote was programmed successfully. [18]
  4. If you programmed your remote correctly, the fob should respond to any command you tell it. Try locking or unlocking your vehicle’s doors. [19]
    • If this doesn’t work, start from the beginning again. For further assistance, contact your local auto locksmith or dealership.
    5. Advertisement
Method 5
Method 5 of 6:

Replacing the Fob Battery

PDF download Download Article
  1. Depending on your remote or fob, a notch may or may not be visible. In this case, use a flathead screwdriver or a similar tool to wedge the remote open. You should be able to open it down the middle, revealing a round, flat battery inside. [20]
    • If your remote has small screws, find an appropriate size screwdriver to unscrew them to remove the battery without causing any damage to the remote.
  2. As with any battery, the type will be printed or engraved into its design. Be sure to purchase a brand-new battery of the same kind.
    • CR2032, CR2450, CR2025, CR1616, and CR2016 are the most commonly used button cell batteries for car keys. [21]
  3. You should be able to easily pop the battery out with the tip of your fingers. If you’re having difficulty, use a toothpick or something similar to wiggle the battery out. Pop the new battery in its place.
  4. Close up the remote or fob by snapping or screwing it back into place once the new battery is in place. Now, you can press any command on your key and receive a response. [22]
    • If it’s still not responding, you can try reprogramming it by following the earlier steps. If nothing happens, refer to your local auto locksmith or dealership.
    5. Advertisement
Method 6
Method 6 of 6:

Replacing Keys

PDF download Download Article
  1. Blank keys can be ordered online for as little as $5, though the prices may vary depending on the make and model of your vehicle. You can’t, for example, take a remote for your old car and program it to your new car, even if they are the same make and model.
    • For newer cars, programming a new key may be more difficult. You may have to visit a dealer or an auto locksmith. [23]
  2. Electronic keys all have transponder chips. Some of these will let you unlock the car but won’t let you start the car. You’ll have to call a certified car manufacturer dealer or an auto locksmith. Either can help if you cannot program your key. [24]
    • These professionals will use your car’s vehicle identification number (VIN) number to make sure you get the right key.
    • The VIN number can be found on most official documentation, including the vehicle title, registration, and insurance card. You may also find it by looking through the windshield onto the right side of the dashboard.
  3. By law, you must show your license and registration when ordering an official key. This prevents someone from taking your car and getting a new key. You may also find a code card in your owner’s manual. Bring this along to make key creation easier. [25]
    4. Advertisement

How Do You Program a Car Key?


Community Q&A

Search
Add New Question
  • Question
    Can I program a car that only has one working key?
    Community Answer
    If it is a GM vehicle, most likely. Insert your working key into the ignition and turn it on. Wait for the security light to go out. Quickly remove the key and insert your new programmed key. Turn the ignition on and wait for the security light to go out. Your key is then programed. This technique only works on GM cars which do not use the VATS system, though.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 20 Helpful 18
  • Question
    My 2001 Ford Expedition will not crank. I am using the original key that I have been using, and my mechanic says it won't turn over because the key is not communicating with the car computer. Any ideas?
    Glenn Letteer
    Community Answer
    Older Ford vehicles that utilize the "Pats" system are known to have this issue. The chip in the key is strong, but the antennas lose their strength. Begin by taking your key to a locksmith to have it scanned. If the locksmith is able to read the chip, the chip is good and is not the problem. Purchase a new antenna and plug it in. This should fix your issue.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 12
  • Question
    How do I program a 2001 Mercedes key fob?
    Community Answer
    YOU don't. It is impossible for you to program your own Mercedes key with out purchasing thousands of dollars in specialized equipment. If you are able to locate an Eeprom Automotive Locksmith, they have the ability to program your Mercedes key. If there is not one near you, you can remove your ignition and ship it to one to have the key electronically added. If this is not possible, the dealer is your only option.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 17
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • The steps for key programming differ from manufacturer to manufacturer. Consult your owner’s manual or search for your car make and model online to find the specific steps needed.
        Thanks
        Helpful 3 Not Helpful 2
      • It’s a good idea to keep several working keys on hand. Some car brands require two working keys before you can program a new one.
        Thanks
        Helpful 1 Not Helpful 2
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Reset a Luggage Lock
      How to
      Unlock a Door
      How to
      Open a Door with a Credit Card
      How to
      Reprogram a Sentry Safe with or without the Factory Code
      How to
      Open Combination Locks Without a Code
      How to
      Unlock a Safe: Combination Locks, Digital Locks & More
      How to
      Break a Lock
      The Best Ways to Get a Broken Key Out of a Lock
      How to
      Pick Locks On Doorknobs: Knob Types & Lockpicking Tutorials
      Don’t Panic! What to Do When You’ve Locked Your Keys inside Your Car
      How to
      Open a Locked Bathroom Door (Twist & Push Locks)
      How to
      Replace the Batteries in a Mercedes Key Fob
      How to
      Open a Lock
      Easy Ways to Set (And Reset) a Samsonite Lock
      Advertisement

      References

      1. ↑ https://diamondbacklockandkey.com/how-to-program-car-keys/
      2. ↑ https://www.consumerreports.org/cars/car-maintenance/how-to-replace-your-car-key-fob-a4802255222/
      3. ↑ https://locksmithphilly.com/how-to-program-a-key-fob/
      4. ↑ https://www.youtube.com/watch?v=hiCYteqy8P0&t=72s
      5. ↑ https://www.aaa.com/autorepair/articles/what-to-do-when-you-lose-your-car-keys
      6. ↑ https://www.aaa.com/autorepair/articles/what-to-do-when-you-lose-your-car-keys
      7. ↑ https://www.aaa.com/autorepair/articles/what-to-do-when-you-lose-your-car-keys
      8. ↑ https://www.youtube.com/watch?t=39&v=93_R6bMTnQA&feature=youtu.be
      9. ↑ http://www.programyourkeys.com/Honda.html
      1. ↑ https://www.youtube.com/watch?v=hiCYteqy8P0&t=43s
      2. ↑ https://locksmithphilly.com/how-to-program-a-key-fob/
      3. ↑ https://locksmithphilly.com/how-to-program-a-key-fob/
      4. ↑ https://locksmithphilly.com/how-to-program-a-key-fob/
      5. ↑ https://www.youtube.com/watch?v=d0unjhqwKKM&t=25s
      6. ↑ https://www.midwaynissan.com/blog/2022/february/23/how-to-program-nissan-key-fob-push-start.htm
      7. ↑ https://www.youtube.com/watch?v=d0unjhqwKKM&t=38s
      8. ↑ https://www.midwaynissan.com/blog/2022/february/23/how-to-program-nissan-key-fob-push-start.htm
      9. ↑ https://www.youtube.com/watch?v=d0unjhqwKKM&t=54s
      10. ↑ https://www.midwaynissan.com/blog/2022/february/23/how-to-program-nissan-key-fob-push-start.htm
      11. ↑ https://thenewswheel.com/how-to-replace-the-battery-in-your-cars-key-fob/
      12. ↑ https://www.batteriesplus.com/blog/power/key-fob-batteries
      13. ↑ https://thenewswheel.com/how-to-replace-the-battery-in-your-cars-key-fob/
      14. ↑ https://www.consumerreports.org/cars/car-maintenance/how-to-replace-your-car-key-fob-a4802255222/
      15. ↑ https://mechanicbase.com/electric/reprogram-key-fob/
      16. ↑ https://www.allstate.com/resources/car-insurance/car-key-replacement

      About This Article

      Article Summary X

      To program a car key, start by inserting a programmed key into the ignition. Then, turn the car on and off with the key without starting the motor. Then, quickly remove the programmed key and insert a second programmed key and turn the car on and off again. Finally, quickly replace the second programmed key with the unprogrammed key and turn the car on and off one last time. To learn how to program a key fob, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 423,616 times.

      Did this article help you?

      Advertisement