How to Prune Ninebark

PDF download Download Article
PDF download Download Article

Ninebark is a popular shrub for landscaping because it is low-maintenance and it comes in attractive varieties. It is also resistant to most plant diseases and grows easily. If you have a ninebark, you will need to prune it at least once per year to keep it healthy. Choose the best time to prune, identify the areas that would benefit from pruning, and use proper pruning techniques to ensure that your ninebark remains healthy and beautiful for years to come!

Things You Should Know

  • Prune ninebark early in the growing season, after flowers appear but before it develops too much.
  • Remove dead branches and leaves, thin out overcrowded stems and branches, and cut off weak or spindly shoots.
  • Choose an appropriate tool to prune and make 45-degree angle cuts, trimming back branches almost to the ground and disinfecting your tools after.
Method 1
Method 1 of 3:

Choosing When to Prune Ninebark

PDF download Download Article
  1. It is usually best to prune ninebark before it starts to develop too much, which will be sometime between late winter and early summer depending on your climate. Consider when the growing season usually begins in your region to determine when to prune ninebark. [1]
    • For example, if you live somewhere that starts to get warm around February or March, then you may need to prune early. If it doesn’t start to get warm until June in your area, then you may not need to prune until later.
  2. Ninebark will start to flower early in the growing season, so this is a good indication that it is time to prune. Wait for flowers to start appearing on your ninebark and then prune it. [2]
    • Avoid waiting to prune for more than a few days after the flowers appear because this may damage the ninebark and the plant will start growing and expanding, which will create more work for you.
    Advertisement
  3. After your initial pruning at the start of the growing season, you may need to do some maintenance pruning during the early part of summer. Pay attention to how the plant develops and prune as needed to keep it healthy and looking its best.
    • Do not prune ninebark past the middle of summer because the ninebark will be entering its dormant phase and pruning at this time may damage it.
    4. Advertisement
Method 2
Method 2 of 3:

Identifying Where to Prune Ninebark

PDF download Download Article
  1. Check the ninebark for any branches that have died or that are broken during your maintenance pruning. Cut these down to the ground or as close to the connecting branch as you can. [3]
    • Don’t cut the branches down to stubs. Remove them completely.
    • The leaves on dead stems and branches will be dry and crunchy or nonexistent. Branches that are sick or dead may have flaky bark that looks different from the bark on the rest of the shrub.
  2. Check the interior of your ninebark during maintenance pruning to see how well the stems and branches are spaced out. If they look crowded, then remove some of them to thin them out and promote healthier growth. Make sure to cut them all the way down to the connecting branch. [4]
    • For example, if you find an area of the shrub where the branches are rubbing together, remove a few of the branches so that they are not rubbing together anymore.
    • You may also notice that some areas of the ninebark are so full of foliage that no light can get through to the interior of the plant. This may be the case even if the branches are spaced out. Thin out these areas by cutting out some of the stems and their connecting leaves.
  3. If during maintenance pruning you spot any shoots that look weak (sagging or flimsy) or spindly (with few leaves or flowers), then remove these. Cut them as close to the connecting branch as you can. Don’t leave any stubs. [5]
    • Pruning shears work well for pruning shoots.
    4. Advertisement
Method 3
Method 3 of 3:

Using Proper Pruning Techniques

PDF download Download Article
  1. The type of tool you use will depend on the area of the ninebark you are pruning. Depending on the size of your ninebark, you may need 1 tool for shoots and stems and another tool for branches. Some common pruning tools include:
    • Pruning shears. Pruning shears are best for cutting through branches that are up to 0.75 in (1.9 cm) in diameter.
    • Loppers. Loppers, or lopping shears, work well for cutting through branches that are up to 1.5 inches (3.8 cm) in diameter.
    • Hand saw. You may need a hand saw to remove branches greater than 1 in (2.5 cm) in diameter. Some hand saws are even strong enough to cut through branches as thick as 4 inches (10 cm) in diameter. For anything thicker, use a chainsaw.
  2. To prevent the spread of diseases among diseased and healthy plants, it is important to disinfect your gardening tools after using them. First, rinse your tools off with clean water. Then, mix up a disinfectant solution made up of 1 part bleach and 9 parts water. Soak your tools in the solution for 30 minutes and then rinse them off with clean water. Let them air dry or dry them with a clean towel before storing them. [6]
  3. It is important to cut any branches you remove near the ground. Otherwise, they may hinder the growth of the ninebark and they will affect the appearance of the shrub as well.
    • You can even cut the entire shrub nearly down to the ground if it is out of control.
  4. Whenever you need to remove a branch, cut it at a 45-degree angle. The lowest part of the branch should be even with the connecting branch and the highest part of the branch should be about 0.25 inches (0.64 cm) from the connecting branch. [7]
  5. It is important to leave the bottom of the shrub wider than the top of the shrub after you prune it or the bottom of the shrub will not get adequate light. This could cause the ninebark to grow poorly. Prune the shrub at a slight angle so that there is a gradual thickening towards the base.
    • For example, you could prune the ninebark into a pyramid-type shape with a rounded top.
  6. For aesthetic reasons, make your cuts with symmetry in mind. If you cut a branch on 1 side of the shrub, make sure that the opposite side has a similar angle to it. Step back and look at your shrub now and then to ensure that you are keeping it symmetrical.
    7. Advertisement


Community Q&A

Search
Add New Question
  • Question
    What do I do if branches on ninebark look dead on the inside, but the ends are blooming?
    Community Answer
    Put small cuts in the branch starting from the end and working your way toward the trunk. If it is green, it is fine; if it is dry, cut it off.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 8
  • Question
    My ninebark has a bad case of powdery mildew. I have not been able to keep under control. Should I cut it right down to the ground? I have a very large flower garden and am concerned.
    Bani S
    Community Answer
    First, prune the leaves that are heavily infected. Then sprinkle some cinnamon powder on the entire plant. This is highly effective, however slightly heavy on the wallet!
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 12
  • Question
    Exactly how late can I prune? All my nine barks are out of control and I am super reluctant to hard cut as this is the first year out of several that they have grown well.
    Lillie Burgess
    Community Answer
    It is best to prune and trim your ninebark shrub during its dormant period, after the end of fall and before the start of spring. Once the plant has stopped blooming, you can perform some light pruning to remove any stray branches.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 7
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You’ll Need

      • Pruning shears
      • Loppers
      • Hand saw
      • Gardening gloves
      • Bleach
      • Water
      • Clean towel

      You Might Also Like

      How to
      Start a Garden: A Comprehensive Guide
      How to
      Plan, Prepare, and Plant a Garden
      How to
      Build a Lean to Shed
      6 Ways to Water Your Plants While You're on Vacation
      How to
      Prune a Schefflera Plant
      How to
      Prune a Tree
      How to
      Prune Dracaena
      How to
      Prune Ferns
      How to
      Prune a Magnolia Tree
      How to
      Prune a Mulberry Tree
      When and How to Prune Citrus Trees
      How & When to Prune Limelight Hydrangeas for Best Growth
      Advertisement

      References

      1. ↑ https://www.rhs.org.uk/advice/profile?PID=197
      2. ↑ https://www.rhs.org.uk/advice/profile?PID=197
      3. ↑ https://www.rhs.org.uk/advice/profile?PID=197
      4. ↑ https://www.rhs.org.uk/advice/profile?PID=197
      5. ↑ https://www.rhs.org.uk/advice/profile?PID=197
      6. ↑ http://gardeningsolutions.ifas.ufl.edu/care/tools-and-equipment/disinfecting-tools.html
      7. ↑ https://www.sunset.com/garden/garden-basics/basic-pruning-cuts

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 96,803 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement