Download Article
Download Article
A troublesome rust spot on a car typically spreads with time as the metal underneath is exposed to moisture and air, which cause it to oxidize, or corrode. [1] X Research source Whether you plan on keeping it or selling it, your car will look cleaner (and be worth more) without the rust, so don't hesitate to take immediate action. Remove the rust spots and give the car fresh coat of paint as early as possible to stop widespread rust damage before the spot has a chance to spread.
Steps
-
Take basic safety precautions. This method involves using a sander and a grinder — two powerful electric tools that can kick fine rust and paint dust into the air. To avoid injury and protect yourself from these airborne particles, be sure to wear gloves, safety glasses and especially a dust mask to keep the rust and paint particles out of your lungs.- For heavy-duty jobs, consider using a respirator rather than a simple dust mask. [2] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
-
Mask any spots that you don't want to get dusty. As noted above, this job puts rust and paint particles in the air. If you're not careful, these can settle on your car, giving it a "dirty" appearance that can be hard to get off. To avoid this, "mask" the parts of your car that you're not working on (that is, cover them with tape and masking paper.) Use a tarp sealed with painter's tape under the car to define your work area and protect the floor. [3] X Research source- Masking the car off is a delicate art. Do not use newspaper, as paint spray can leak through it and leave unsightly specks. Instead, use real masking paper, which is less porous and won't let paint through. Also, be sure to tape every single edge of your masking paper down. Don't just use a few small pieces of tape to get it to stay in place — paint can (and will) work its way under any loose edges.
Advertisement -
Try to mask along the existing panel lines. In general, you don't want your masking to stop in the middle of a panel, or you will be left with sharp lines where your new paint ends and the old paint begins. These lines do not go away with any amount of buffing or addition of clear coat layers, so practice prevention by masking the car correctly in the first place, stopping at the panel lines around your rust spots and going no farther inward. [4] X Research source- If you're experienced with auto painting, you might alternatively try stopping your masking a few panels back from your rust spot. If you know how to gradually blend paint, which is done when spraying, you can use this tactic to make it so that there isn't a drastic color difference between one panel and the next.
-
Remove the paint around the rust with a dual action (DA) sander. A DA sander gives you control over the speed of the sander while removing the paint. Start with 80 grit and work your way up to 150 grit. Use the DA sander with (80-150 grit) to take off both the primer and paint, as well as any light rust that hasn't fused with the metal, and level the surface between the painted surface and the unpainted area.- After you're done, feel with your (gloved) fingers — you should now have a smooth surface.
-
Switch to a metal grinding wheel. Next, use a metal grinder to remove any thick rust buildups and expose any pits. When using the wheel, go slowly, because these tools can do a lot of damage to the car's body if used incorrectly. Once the grinding is done, apply rust removing acid to the area to remove the microscopic particles of rust that remain.- For this job, phosphoric acid is usually best and can be bought at most auto parts stores.
- If you want, use a hole spot filler or a body filler like Bondo to even out some of the dents and fill the space where the paint is gone. Finish application of your filler by sanding by hand (using 120 grit sandpaper) to get a nice smooth metal surface. See below for more extensive information on using fillers.
-
Prepare the spot for priming. Purchase primer that is ideal for painting on bare metal and an auto spray that matches the color of your car. Both of these supplies can be found at an auto supply store. Primers may vary, so follow the instructions provided with your primer or talk to an expert at the auto store for definitive information. Typically, what you will need to do to prepare is:- Wipe the area with mineral spirits or paint thinner.
- Tape newspaper on all surrounding areas within three feet.
-
Apply thin, even coats of primer. Spray three coats of primer, waiting a few minutes between coats to allow each one to apply. [5] X Research source Don't over-apply — there shouldn't be so much primer in any one coat that it drips or runs.- For most primers, you'll need to allow the fresh coat to dry overnight (at least 12 hours).
-
Sand with 400 grit wet sandpaper. This abrasive is specifically made for sanding between paint coats to smooth the surface and degloss so the paint bonds properly. Keep a bucket of water handy to rinse the sandpaper frequently so that it does not get fouled with paint. To finish, wash the painted area with a light soap and water mix. -
Spray a thin coat of paint. Use thin coats of paint and let each coat "rest" for a minute or two between applications so as not to let the paint run or sag. Use as many coats of paint over the primer as you need in order to achieve a nice color and finish.- Let the paint set at least 24 hours before pulling off the tape. Be patient — if the paint still feels tacky, you may need more time.
-
Buff the edges of the new paint so that it blends with the old paint. If necessary, apply a clear coat to match of the finish on the rest of the car. Finally, allow the paint to cure for 48 hours. -
Wash and polish the car. [6] X Trustworthy Source Consumer Reports Nonprofit organization dedicated to consumer advocacy and product testing Go to source Congratulations! Your car is now rust-free and ready to ride.- As a precaution, never wax fresh paint within 30 days of painting — the scrubbing, buffing action can pull fresh paint off.
Advertisement
-
Grind rust down to "fresh steel." This method is slightly different than the one above, but works by the same basic principles and should work especially well for rust spots that have caused holes or pitting. To start, use a metal grinder to remove all of the rust. You want to grind to the point where you have "fresh" (un-rusted) steel all around where the rust spot was, even if this leaves you with a hole. [7] X Research source- Getting rid of all of the rust is crucial — if you miss even a small fleck of rust, it can corrode underneath your car's paint over time and lead to another rust spot.
- Keep in mind, that, because you're using a grinder, all of the safety precautions at the beginning of the page apply for this method as well. That means wearing gloves, safety glasses and especially a dust mask to keep the rust and paint particles out of your lungs.
-
Cover the hole with a non-rusting filler. Next, you'll want to apply a filler over your former rust spot. You can buy commercial fillers (like Bondo) at most auto stores for fairly cheap. For larger holes, however, you may need to improvise. In this case, you need something flat and fairly durable that paint can bind to and that won't rust to patch the hole with. Fix this object in place with a coat of commercial filler and allow it to dry. [8] X Research source- Believe it or not, cut-up beer or soda cans work well for hole-patching purposes. The aluminum in these cans is naturally corrosion-resistant and many modern cans are coated with a thin protective layer anyway. Another good choice is thin sheets of hard plastic.
-
Use sandpaper to level. Next, use sandpaper to create a smooth, even surface between your new "patch" and the actual body of the car. [9] X Research source This can be a long, tedious process — as you sand, you'll probably find that you need to add additional filler and let it dry periodically as you sand away the existing filler. The process thus becomes something along these lines: Filler, grind, filler, grind, filler, grind... (and so on).- Start grinding with a rough (low grit) sandpaper to smooth out big bumps, then gradually transition to a medium and finally a fine (high grit) sandpaper for a perfectly smooth finish.
- Slow, steady, hand-sanding is best for this process — mechanical grinders can tear your patch away.
-
Mask around your work area. Next, you need to apply a fresh coating to your newly-repaired rust spot. To prepare for this, you'll need to mask most of your car to protect it from primer paint, and other airborne particles. Don't forget your windows and tires.- Try to have the edges of your masking aligned with existing seams in the body of the car to hide minor differences between your new paint and the old paint (unless you're experienced enough to produce a smooth blend).
-
Apply primer, then paint. Apply a few thin coats of primer, allowing each coat a minute or two to adhere before you reapply on top of it. Let the primer dry overnight, then, after about 12 hours, give it a sanding with wet 400 grit sandpaper so that the paint can adhere properly. When you're ready, apply your paint on top, using a similar "spray one thin coat at a time and let it dry" strategy as you used for the primer.- You may want to buff out the edges of your paint and/or cover with a clear coat layer so that this section matches the finish on the rest of your car.
- Obviously, it's important to pick a paint that matches your car's current finish. There is a specific paint color code for each vehicle that can be found on a sticker somewhere in the vehicle. [10] X Research source This information is needed in order to match the color up. Most auto paint shops will be more than happy to help you with this. Keep in mind, however, that the paint on older cars can gradually discolor over time.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Alternative to these lengthy processes are Rust converters , those are primers designed to be applied directly to a rusty surface. Unlike the standard scrape, prime, and paint regime, the user does not have to bring the surface down to bare metal. There are two primary components in a rust converter: a tannin and an organic polymer. The organic polymer provides a protective primer layer.The tannin reacts with the iron oxide, converting it to iron tannate, a stable blue/black corrosion product.Thanks
- If the car has significant rust that covers a large area of the body, you may want to leave it to the professionals.Thanks
- If the rust spots are on or around the fender, it may be useful to jack the car safely with a chock behind one of the wheels. Pull off the wheel and unscrew the plastic protecting the wheel well. Doing so will give you a chance to pound out any dents from the inside, and will also allow more room for grinding and painting.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Wear gloves, safety glasses and a dust mask to prevent rust and paint dust from irritating or injuring you.Thanks
- Propellants have explosive properties, so do not allow any sparks or flames, including lit cigarettes, near the work area during the entire rust removal process.Thanks
- If using phosphoric acid BE SURE TO READ AND FOLLOW instructions on the product packaging. [11] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to sourceThanks
Advertisement
References
- ↑ https://news.wisc.edu/curiosities-why-dont-cars-rust-like-they-used-to/
- ↑ https://www.cdc.gov/niosh/docs/2010-133/pdfs/2010-133.pdf
- ↑ https://www.familyhandyman.com/automotive/how-to-repair-rust-on-a-car/
- ↑ https://www.familyhandyman.com/automotive/how-to-repair-rust-on-a-car/
- ↑ https://shop.advanceautoparts.com/r/car-projects/how-to-remove-rust-from-your-vehicle
- ↑ https://www.consumerreports.org/car-repair-maintenance/how-to-wash-your-car/
- ↑ https://youtu.be/n4vusY2-rkQ?t=254
- ↑ https://youtu.be/n4vusY2-rkQ?t=618
- ↑ https://youtu.be/n4vusY2-rkQ?t=682
About This Article
Article Summary
X
To remove rust from a car, you’ll need to get a sander and a grinder, along with safety gear, like gloves, goggles and a mask, to protect yourself from rust and paint particles. Then, cover any parts of the car you’re not working on with paper and masking tape before you sand off the paint around the rust. Next, use the grinder to remove the rust, then fill any spaces where you've sanded off the paint with a body filler. After that, apply 3 coats of primer, sand with wet sandpaper, and cover the area with as many coats of paint as necessary to get the right color and finish. For more information from our Automotive co-author, like how to use filler patches to remove rust from your car, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,624,243 times.
Reader Success Stories
- "This article helped me very much with the possibility of being able to do it by myself using the step-by-step procedures underlined." ..." more
Advertisement
"This article helped me very much with the possibility of being able to do it by myself using the step-by-step procedures underlined."
..."
more
"This article was very helpful. I will keep it in case I need help with the car."
"The article was brief, to-the-point, and told me exactly what I wanted to know."
"Just want to say great information, easy to follow and learn from."
"It helped me remove rust from a car panel."
