Download Article
Download Article
Vinyl decals are designed to stick to glass and maintain their hold for a long time. Unfortunately, this means that their removal can be difficult and time consuming. Removing the decal too aggressively can result in damage to your window. With the proper products and methods, you can remove the decal as well as any adhesive residue without damaging your car window.
Steps
-
Heat it with a hairdryer. Heat will loosen the adhesive behind the decal and make it easier to remove. Use a hairdryer on the high heat setting. Hold it over decal until you start to see the edges fray. [1] X Research source
- You can also use a heat gun. These are used to dry glue and can be found at any home improvement store. They can burn hotter than a hairdryer and thus are better for large or particularly stubborn decals.
-
Use a plastic blade. Most home improvement stores sell plastic blades that are specifically designed for removing decals and other flat objects that are sealed with adhesives. The plastic blades will minimize the risk of damage to the window.
- Slowly slide the blade under the edges and chip away at the adhesive to separate the decal from the window. Try to hold the blade parallel to window to minimize the risk of damaging the glass.
- Look for the “Li’l Chizler” which is specifically designed for removing adhesives from glass.
- You may be able to peel the decal off once you have the edge lifted. Older decals will be more likely to split into little bits and generally are more difficult to remove.
Advertisement -
Use a plastic card. Use a credit card or library card if you don’t have a plastic blade available. Chip away at the adhesive by holding it parallel and slowly sliding it under the decal.
-
Use a razor blade. A razor blade is the best tool for removing the adhesive but is also the most likely to risk damaging the glass. Therefore, it should be a last resort is plastic scrappers don’t work. Be particularly careful to hold the blade parallel to the glass and chip at the residue with small strokes.
- If the blade becomes dull or doesn't seem as effective, switch to a new blade instead of turning it over.
Advertisement
-
Spray residue remover. Whether you peel the decal off or scrape it off, it is likely to leave behind adhesive residue. Adhesive residue removers are spray-on chemicals that are designed to break down adhesive reside and can be found at any home improvement store. You can also use a citrus-based glass cleaner. [2] X Research source
- After you have applied the chemicals to the residue, wait five minutes and then try to wipe away the adhesive with a paper towel.
- Both options are non-toxic but you should still avoid direct contact with skin.
-
Use a stripe eliminator. If you are dealing with a particularly large decal or have difficulty removing spraying off the residue, you may want to invest in a stripe eliminator. This is a smooth rubber wheel that attaches to any power drill and can be used to remove adhesive. A stripe eliminator attachment can be found at any home improvement store for roughly $20. [3] X Research source
-
Wipe down with a rag. Remove any chemicals or remaining reside with a lint-free cloth. Dab the area gently to remove all liquids without leaving streaks.
Advertisement
Expert Q&A
Search
-
QuestionWhat's the easiest way to take a vinyl decal off a car window?Chad Zani is an Auto Detailing Expert based in Los Angeles, California. He is the Director of Franchising at Detail Garage, an automotive detailing company with locations around the U.S. and Sweden. He and his team are auto detailing experts that offer detailing and car care services.One of the oldest tricks is to just scrape it with a razor blade. Obviously you can't do that on paint, but it works great on glass. It can also help to use a decal spray or even glass cleaner as a lubricant for the razor. If the blade gets covered with adhesive residue, you may need to get a new blade.
-
QuestionI did proper removal of letters on car subdue but the darkened imprint is burned into window what can remove that?Community AnswerIf the imprint isn't disappearing at all after you use chemicals and wash it, it's likely sun-stained, meaning the window itself has darkened over time. If the windows are sun-stained, you have to take it to a glass specialist.
-
QuestionCan you remove a window decal and use it again?Community AnswerLikely not. You'll either rip the decal off in pieces or it will no longer have any adhesive left on the back to be used again.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
References
About This Article
Article Summary
X
To remove vinyl decals from a car window, heat up the decal with a hairdryer or heat gun until the edges fray, which will make it easier to remove. Then, use a credit card or library card to carefully scrape off the decal. To do this, hold the blade parallel to your window so you don't scratch the glass and slowly slide the blade under one corner. Once you have a corner done, use the card to chip away at any remaining residue. If there is still residue after the decal has been removed, use glass cleaner to remove it. To learn how to use a razor blade to remove a decal, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 487,710 times.
Reader Success Stories
- "The razor worked the best for me! It came right off! Thanks for the advice. "
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"The razor worked the best for me! It came right off! Thanks for the advice. "
"Very clear and concise. Seems like it will be helpful. Thank you!"
