Download Article
Get old & damaged coats back to their former glory with this guide
Download Article
Finding a tear in your favorite leather jacket can be a real bummer! Fortunately, you have quite a few options for repairing rips, tears, scuffs, and holes in your jacket. We've researched the topic thoroughly so we could answer your most common questions about leather jacket repair. Read on to learn how to get your jacket looking great again!
Leather Jacket Repair
To repair rips, place a leather subpatch inside the tear and glue it down with leather adhesive. To fix scuffs and scratches, buff the spot with leather filler. Then, apply leather dye on top to camouflage the spot.
Steps
Question 1 of 6:
How do you repair rips or tears in a leather jacket?
-
Buy a subpatch and trim it down to the appropriate size. Measure the length and width of the rip first. Then, trim down a subpatch so it's 1 ⁄ 4 inch (0.64 cm) longer and 1 ⁄ 4 inch (0.64 cm) wider than the rip (that way, the subpatch will completely cover the rip on all sides). Finally, round off the edges of the subpatch so it doesn't have any sharp angles. [1] X Research source
- For example, for a 1 inch (2.5 cm) rip, trim the subpatch to be 1 1 ⁄ 2 inches (3.8 cm) long and 1 ⁄ 2 in (1.3 cm) wide so it covers the torn area completely.
- Buy subpatches individually or purchase a leather repair kit (which includes subpatches and leather adhesive) at a sewing store or auto parts shop.
-
Tuck the subpatch into the tear and smooth it down flat. Use a pair of tweezers, a palette knife, or your fingers to position the subpatch inside the tear. Once the subpatch is in place, flatten it out so it’s free of folds or wrinkles. [2] X Research source
- If the leather looks dirty, give it a quick wipe with rubbing alcohol.
Advertisement -
Glue the tear closed with leather/vinyl glue and let it dry for 24 hours. Dab a small amount of the leather/vinyl adhesive on the surface of the subpatch where it sits below the torn leather. Then, carefully bring the edges of the tear together and press them down for 30 seconds. Give the glue about 24 hours to set and your jacket will be ready to wear! [3] X Research source
Advertisement
Question 2 of 6:
How do you fix scuffs or scratches in a leather jacket?
-
Spread leather compound/filler over the area to cover the scuff. [4] X Expert Source Mallika Sharma
Certified Leather Care Technician Expert Interview. 7 January 2021. Scoop up a small amount of compound and gently smooth it over the scuff, hole, or tear. Using the lowest heat setting, hold the blow dryer 6 inches (15 cm) away from the leather and heat the compound for 30-60 seconds. [5] X Research source- If the leather compound or filler didn’t come with an applicator, use a plastic knife or palette knife.
- You can buy leather compound/filler online, at home improvement stores, and some department stores.
-
Buff the compound with a sheet of high-grit sandpaper to smooth it. Use smooth, circular motions to smooth out the filler. Keep going until the compound/filler flattens out and blends into the leather around the damaged area. [6] X Research source
- If your leather repair compound came as part of a kit, it will probably include sandpaper. If it doesn’t, use 220-grit sandpaper or higher.
- You might need to apply a second coat of compound if the damage is still visible after blending the first coat.
-
Apply 1-2 coats of leather dye if you need to camouflage the compound. [7] X Expert Source Mallika Sharma
Certified Leather Care Technician Expert Interview. 7 January 2021. If you can still see the dried compound after blending it into the leather, use an old cloth or sponge to apply matching dye over the area and let it dry for an hour. Add more coats of dye, if needed, until the compound is covered up and you're happy with the results. [8] X Research source- Leather dyes are available in a wide range of colors. Dye companies usually provide a color chart for their products, so choose the dye color that looks like the best match. Then, spot-test the dye on an inconspicuous area of your jacket to confirm it's a good match before you use it on the exterior.
Advertisement
Question 4 of 6:
How do you bring a leather jacket back to life?
-
Apply saddle soap with a dampened cloth to remove dirt and grime. Wet a cloth and wring it out to get rid of excess moisture. Then, rub the cloth on the saddle soap to work up a lather and apply the soap to dirty areas of the leather using circular motions. Wipe off any excess soap with a clean, damp cloth and wait 10-15 minutes for the leather to dry. [11] X Research source
- Before applying saddle soap to the exterior, spot-test an inconspicuous area on the inside of the jacket. Make sure the soap wipes off easily and doesn't leave behind a stain.
- Generally, you only need to clean a leather jacket with saddle soap once a year.
-
Follow with leather conditioner to restore moisture and softness. Saddle soap removes the leather's natural oils, so it's important to re-moisturize the surface right away to prevent cracking. Use a soft cloth to apply a thin layer of leather conditioner to the jacket's exterior using circular motions. Let the conditioner soak in for about 20 minutes. Then, wipe the leather with a clean cloth to remove any excess conditioner and you're all set. [12] X Research source
- Always condition your leather after cleaning it with saddle soap and any time you accidentally get the jacket wet (like after getting caught in a rainstorm).
Advertisement
Expert Q&A
Search
-
QuestionHow do you repair a tear in leather?Mallika Sharma is a Certified Leather Care Technician and the Founder of The Leather Laundry, a niche spa service for luxury leather gear in India. Mallika specializes in leather cleaning, coloring, repairing, and restoring for shoes, handbags, jackets, wallets, belts, and sofas. She holds a Master’s degree in Finance and Investment from the University of Edinburgh Business School. Mallika is a certified Professional Leather Care Technician and trained with the globally reputed leather care company, LTT in the United Kingdom.Torn leather can be repaired using any kind of mending or darning technique! Small tears can be repaired using an adhesive to paste the torn piece back in its place. Use a filler cream to bind the tear area and let it dry for a few hours. After, touch it up with matching color.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://www.youtube.com/watch?v=i2wkC09yn_0&feature=youtu.be&t=48
- ↑ https://www.youtube.com/watch?v=i2wkC09yn_0&t=65s
- ↑ https://www.youtube.com/watch?v=i2wkC09yn_0&feature=youtu.be&t=70
- ↑ Mallika Sharma. Certified Leather Care Technician. Expert Interview. 7 January 2021.
- ↑ https://www.youtube.com/watch?v=i2wkC09yn_0&feature=youtu.be&t=102
- ↑ https://www.youtube.com/watch?v=i2wkC09yn_0&feature=youtu.be&t=132
- ↑ Mallika Sharma. Certified Leather Care Technician. Expert Interview. 7 January 2021.
- ↑ https://www.youtube.com/watch?v=DJ8s7wH-YCg&feature=youtu.be&t=25
- ↑ https://www.libertyleathergoods.com/leather-glue/
About This Article
Thanks to all authors for creating a page that has been read 122,729 times.
Advertisement