Download Article
Tips on switching out old pedals to ride safely & smoothly again
Download Article
When bike pedals get worn down or loosened, it's time for them to be replaced. Fortunately, you can easily replace your bike pedals at home using a few simple tools. When you replace your bike pedals, take the time to install the new pedals correctly so you don’t have a hard time taking them off in the future.
How to Install New Bike Pedals
Use a spanner wrench to take off the left and right pedals. Then, coat the threads inside the pedal holes with waterproof grease. Simply tighten the new left and right pedals into the left and right pedal holes with a spanner wrench.
Steps
-
Secure your bike on a flat surface. If your bike has a kickstand, rest your bike on it. If your bike doesn't have a kickstand, lean it up against a wall or a table so it stays upright. [1] X Research source -
Check the pedals to see what kind of spanner (wrench) you’ll need. Look at the space in between the pedal and the crank arm (the metal arm that your pedals are attached to). If you see flats for a spanner (wrench) to grip on, you’ll need to use a pedal spanner (wrench). If you don’t see spanner (wrench) flats, check for a hexagonal Allen-key (wrench) socket at the end of the axle that connects the pedal to the crank arm. If you see the socket, you’ll need an Allen-key (wrench). [2] X Research source- If you need to use a pedal spanner (wrench), a 15 mm (0.59 in) wrench will usually work for an adult bike. For some children’s bikes, you will need a 9 ⁄ 16 in (14 mm) spanner (wrench). Some pedal spanners (wrenches) have openings in both of these standard sizes.
- A 6 mm (0.24 in) Allen-key (wrench) will usually work for bikes with Allen-key (wrench) sockets.
- Some bike pedals are designed so you can use either a pedal spanner (wrench) or an Allen-key (wrench). If you see spanner (wrench) flats on your bike pedal, still check the end of the axle to see if there’s an Allen-key (wrench) socket there.
Advertisement -
Place the spanner (wrench) on the right pedal. If you’re using a pedal spanner (wrench), wrap the jaws of the spanner (wrench) around the spanner (wrench) flats between the pedal and the crank arm. If you’re using an Allen-key (wrench), insert the hexagonal end of the spanner (wrench) into the Allen-key (wrench) socket on the end of the pedal axle. [3] X Research source- Make sure you start with the right pedal. The direction you need to rotate the spanner (wrench) to loosen the right pedal is different to the left pedal.
-
Rotate the spanner (wrench) counterclockwise to loosen the right pedal. If you’re using a pedal spanner (wrench), make a half rotation and lift the spanner (wrench) off the flats. Hold onto the opposite pedal while you do this to give yourself more leverage. Replace the spanner (wrench) on the flats with the handle back up at the top so you can make another half rotation. Continue to crank the spanner (wrench) counterclockwise until the pedal is fully loosened. [4] X Research source- If you’re using an Allen-key (wrench), the socket will likely be on the inside of the pedal spindle. This means you will need to turn the Allen-key (wrench) clockwise (while the spindle itself rotates counterclockwise, from the outside perspective).
-
Take the right pedal off and set it aside. The pedal should slide out of the hole on the crank arm now that you’ve loosened it. If the pedal is still in good condition, store it somewhere in case you need a pedal in the future. [5] X Research source -
Repeat on the left pedal but rotate the spanner (wrench) clockwise instead. The thread on the left pedal is the opposite of the thread on the right pedal. This keeps the left pedal from unscrewing as you’re riding your bike. Use the pedal spanner (wrench) or Allen wrench to unscrew the left pedal until it’s completely loosened. Then, pull the pedal out of the hole and set it with the right pedal. [6] X Research source- If you’re using an Allen wrench on a socket positioned inside the pedal spindle, you will need to turn it counterclockwise.
Advertisement
-
Apply waterproof grease to the bike threads in the pedal holes. The grease will prevent your bike pedals from seizing so you don’t have a hard time getting them off later on. Use enough grease to thinly coat the threads. [7] X Research source- You can find waterproof grease online or at your local bike shop.
-
Insert the threaded end of the new right pedal into the right pedal hole. The right pedal should have a small “R” on it to indicate that it’s the right pedal. Don’t push the pedal into the hole or you could damage the threads. Only the end of the new pedal should be resting in the pedal hole. [8] X Research source- Before you start using the wrench, do a few turns by hand to ensure that the threads on the new pedal are aligned correctly.
-
Place the wrench on the right pedal. If you’re using a pedal wrench, wrap the jaws of the wrench around the wrench flats on the new pedal. If you’re using an Allen wrench, insert the hexagonal end of the wrench through the pedal hole and into the Allen wrench socket on the end of the pedal axle. [9] X Research source -
Rotate the wrench clockwise to tighten the right pedal into place. Continue to rotate the spanner (wrench) clockwise until the pedal is completely tightened. If you’re using a pedal spanner (wrench), make half rotations and then lift and bring the spanner (wrench) back up to the top of the pedal before you make another half rotation. [10] X Research source -
Repeat with the left pedal but rotate the spanner (wrench) counterclockwise. Rotate the spanner (wrench) counterclockwise until the left pedal is secure. [11] X Research source -
Check your pedals to make sure they’re attached correctly. Pull on the pedals gently to make sure they feel secure. If you feel any play (looseness) in the bearing, then the pedals need to be tightened. [12] X Research source Turn the pedals on their bearings and make sure they turn smoothly.- Newly installed pedals usually do not spin freely, since the bearings need time to break in.
- You can also check the axel alignment by turning the pedal crank backwards and watching the pedals carefully. They should stay in the same plane, perpendicular to the crank circle, for the entire rotation.
Advertisement
Community Q&A
Search
-
QuestionMy left bike pedal came off and I can't get it back on.Community AnswerApply waterproof grease inside the bike pedal. Tighten the pedal with a wrench. You may need to buy a new pedal from a repair shop and follow the instructions above.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You’ll Need
- Allen-key (wrench)
- Pedal spanner (wrench)
- Waterproof grease
References
- ↑ https://www.bikeride.com/replace-pedals/
- ↑ http://www.jimlangley.net/wrench/pedalbasics.html
- ↑ http://www.madegood.org/bikes/repair/replace-bike-pedal/
- ↑ https://www.bikeride.com/replace-pedals/
- ↑ http://www.madegood.org/bikes/repair/replace-bike-pedal/
- ↑ https://www.bikeride.com/replace-pedals/
- ↑ https://www.bikeride.com/replace-pedals/
- ↑ http://www.madegood.org/bikes/repair/replace-bike-pedal/
- ↑ http://www.madegood.org/bikes/repair/replace-bike-pedal/
About This Article
Article Summary
X
Before you replace your bike pedals, examine your pedals to see if you need an Allen wrench or pedal wrench. Once you have the right wrench, use it to remove the right pedal first by rotating it counterclockwise until the pedal is loosened. Repeat on the left pedal, but rotate the wrench clockwise this time. Once the old pedals are off, insert the new pedals into the pedal holes and tighten them into place with the wrench. For more tips on replacing your bike pedals, like why you should use a waterproof grease, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 178,915 times.
Advertisement
90%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
