PDF download Download Article PDF download Download Article

Replacing a leaking radiator hose on your car is fairly easy. All you need are a few basic tools, a basic knowledge of how your vehicle is designed, and some replacement coolant. While you can always tape the gap up to prevent more liquid from leaking out of the hose, you’re best off solving the problem permanently. You can save money on a mechanic and leave yourself with a sense of accomplishment if you learn how to replace a leaking radiator hose.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
  1. Do this by running the car to operating temperature. [1]
    • Park the car on level ground with the engine running in park and emergency brake set.
    • With the car running, visually inspect the hoses for collapse or leaks and do the same thing with the engine off.
  2. Open the petcock on the lower end of the radiator and drain it into a bucket. [2]
    Advertisement
  3. [3]
    • Remove the hose clamps from the leaking radiator hose.
    • If the hose will not slide off easily use a carpet knife to make a slice parallel to the hose from the hose end to just past the nipple it is attached to. Peel the hose from the nipple like an orange.
  4. Push the hose firmly over the stub-out from the radiator and engine seating firmly over the rib that runs around the outer section of the stub-out as far as possible.
  5. [4]
    • Top off the coolant as needed. [5]
  6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I get a hold of the clamp on the bottom of the top hose?
    Community Answer
    If you can see the nut, you need a very long screw driver or a socket with long extensions. If not, you need to wiggle your hand through the best you can to get at it.
  • Question
    The hose that connects the radiator to the engine is loose and is leaking. How do I safely reattach it?
    Community Answer
    Make sure the engine is cool and then tighten the clamps. If that doesn't help, replace the hose and clamps.
  • Question
    They forgot to put the clamp on the coolant hose and the hose came off, what kind of damage did it cause?
    Community Answer
    If the car got very hot you could have gotten a blown head gasket or lost all the coolant. If the clamp is back on and the car is not overheating, you're in good shape. If it is overheating, bring it back to the person who forgot the clamp and have them fix it.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      • Clean off the stubs from the engine and radiator to remove any old pieces of hose still stuck on them before installing a new radiator hose
      • The two types of clamps are pinch type and screw type. With the pinch type, use a pair of pliers to pinch the two ears on the clamps and slide them back off of the end of the hose. On a screw type, use a flathead screwdriver to loosen the ratchet mechanism that tightens or loosens the band on the clamps.
      • There will be a top hose running from the radiator to the engine thermostat housing (usually located at the top section of the engine above the water pump). On a rear-wheel-drive car, it will be at the front of the engine. On a front-wheel-drive car, you will find it on the right (or passenger side) of the car. The second radiator hose is located at the bottom of the engine coming off of the water pump running to the bottom of the radiator.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      • Flathead screwdriver
      • Medium-to-large pliers
      • SAE/Metric combo wrench set
      • Ratchet socket set
      • 2 gallon (7.6 liter) pan
      • Box cutter
      • Paper towels
      • Petroleum jelly
      • Funnel
      • 1-2 gallons (3.8-7.6) liters of 50/50 coolant
      • Specific radiator hose for your car

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about car maintenance, check out our in-depth interview with Duston Maynes .

      About This Article

      Thanks to all authors for creating a page that has been read 173,542 times.

      Reader Success Stories

      • Anonymous

        Jun 25, 2017

        "Came to work and could hear hissing from my engine hoses. This article let me know what it might be and how to ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement