Download Article
A step-by-step guide to getting your dishwasher working
Download Article
If your KitchenAid dishwasher isn’t starting or washing your dishes properly, it might be due for a reset. Luckily, resetting your dishwasher is super quick and easy. Simply disconnect the dishwasher from power for 1 minute and then reconnect it. If that doesn’t work, we’ll show you how to reset your dishwasher on the control panel. Keep reading to learn why your dishwasher might need to be reset and other troubleshooting tips if your machine still isn’t working!
KitchenAid Dishwasher Reset
- Unplug your dishwasher from the outlet for 1 minute, then plug it back in.
- Alternatively, push “Hi-temp” and “Dry” 5 times, wait 5 minutes, and then press “Cancel.”
- If the dishwasher still isn’t working, ensure the lock and delay mode are disabled.
Steps
Section 1 of 5:
Resetting the Dishwasher Manually
Download Article
-
Unplug the dishwasher from the outlet for 1 to 5 minutes. Just like turning a computer on and off can work out bugs, disconnecting your dishwasher from power can fix it if it’s not responding to your controls. Just unplug the dishwasher from the outlet and leave it for 1 to 5 minutes to reset. [1] X Research source
- It won’t hurt anything if you leave the dishwasher unplugged for a longer amount of time.
If your dishwasher is wired directly to the power source , simply turn off the breaker that powers the dishwasher.
-
Reconnect the dishwasher and check the control panel for errors. When the 1 to 5 minutes are up, plug the dishwasher back into the outlet or turn the breaker back on. Then, look at the display panel to see if there are any flashing lights or error codes. This tells you if there is a larger problem with your dishwasher. [2] X Research source
- It might take your dishwasher 5 to 10 minutes to reset and run its diagnostics test.
- If an error code is on the display, look it up in your dishwasher’s user manual to see how to fix it.
- If there are no flashing lights or error codes, skip to the next step to give your dishwasher a test run.
Advertisement -
Run a test cycle to see if the problem is fixed. Press “Heat dry,” “Normal,” “Heat dry,” “Normal.” When the lights on the display illuminate, press “Start.” This takes your dishwasher through a test cycle so you can make sure everything is working as it should. [3] X Research source
- If your dishwasher still isn’t working, reset the control panel using the instructions below.
- For some dishwashers, you press the first 3 buttons starting on the left side of the panel in a 1-2-3 sequence to start the test cycle. Repeat the 1-2-3 sequence 3 times and then press “Start” to trigger the cycle.
Tip: If there is an issue in the cycle process, a light will flash on the dishwasher door; the number of flashes is the error code. Look up the code online or in your user manual and continue troubleshooting.
Advertisement
Section 2 of 5:
Using the Control Panel to Reset Your Dishwasher
Download Article
-
Press the “Hi-temp” and “Dry” buttons 5 times. If disconnecting the dishwasher from power doesn’t fix your issue, reset the control panel. Just make sure the dishwasher’s door is completely closed and latched. Then, press the “Hi-temp scrub” and “Energy saver dry” buttons one after the other until you push each button 5 times. [4] X Research source
- On some machines, the buttons are called “Hi-temp,” “Heated dry,” or another similar name. Just press the buttons that have the most similar functions.
- Some models reset after each button has been pushed 4 times instead of 5, but just go ahead and press each one 5 times.
- Note : Resetting the control panel gives the dishwasher’s computer a reboot, which often clears away any programming or user errors. If the problem is related to an actual broken part in the machine, though, it might not fix your dishwasher.
-
Leave the dishwasher alone for 5 to 10 minutes to let it reset. After you push the reset sequence, the lights on the display panel illuminate and flash. You may also hear a whirring noise. Simply leave the dishwasher alone to give it time to run diagnostics and restart. [5] X Research source
- It might take some dishwashers more than 5 to 10 minutes to reset. Just wait until you no longer see any flashing lights or hear any noises.
-
Press the “Cancel” button to finish the reset and test your machine. Pushing the “Cancel” or “Cancel/Drain” button triggers a 2-minute drain cycle. Simply let this cycle run its course before you open the dishwasher. Then, run a cycle to see if the reset fixed your issue. [6] X Research source
- If the reset didn’t solve your dishwasher's problem, check out the troubleshooting section below to see what might be causing the issue. Or, call a professional dishwasher technician to diagnose the issue.
Advertisement
Section 4 of 5:
Troubleshooting if Your Dishwasher Still Isn’t Working
Download Article
-
Check if the control lock or child’s lock is engaged. When the lock function is selected, you can’t turn on the dishwasher. It can get accidentally selected, so take a quick look at the control panel to see if the “Control Lock” button is lit up. [8] X Research source
- To turn off the control lock function , hold the “Lock” button down for 4 seconds.
- The control lock is a great function if you have kids who might want to open the dishwasher or push all the buttons.
-
Confirm that the “Delay” button is not selected. If your dishwasher’s control panel displays a countdown, you may have enabled the delay wash function. With this function, your dishwasher doesn’t start until the clock reaches the delay time. [9] X Research source
- To cancel the delayed wash , press the “Cancel/Drain” button. Then, press “Start/Resume” to start a normal cycle.
- The delayed wash function comes in handy when you want to start your dishwasher at a specific time, like after you’re done using other water-heavy appliances.
-
Verify that the sleep mode is not turned on. Sleep mode helps your dishwasher conserve energy when it’s not in use, but this also means you can’t start your dishwasher when the mode is activated. To turn it off, either press and hold the “Start/Resume” or “Cancel/Drain” button, or open and close the door. [10] X Research source
-
Check for error codes. If your dishwasher’s computer detects an error, it might not start until the error is fixed. Press the “Heat Dry,” “Hi-Temp Wash,” and “Sani Wash” buttons one after the other for a total of 3 times each. Then, close the door and count the number of times the light flashes on the front of the dishwasher to get the error code. [11] X Research source
- Look up the error code in your dishwasher’s user manual, or look it up online. Then, fix the issue.
-
Make sure the dishwasher’s door is closed and latched. Sometimes a stray utensil or bottom rack that isn’t completely in place can keep the door from latching. Make sure that when you press the dishwasher door closed, you hear a clicking sound that lets you know the latch is properly in place. [12] X Research source
- If there’s no obstruction preventing the latch from working, it’s possible it needs to be replaced. Take a look at the latch to see if it looks damaged or broken.
Warning: Never force the dishwasher door shut. It should close and latch with a light amount of pressure. You can damage the door or latch if you have to shove it to get it to close.
-
Ensure that you selected a cycle and pressed the “Start” button. While this might be an obvious troubleshooting tip, life gets busy and you might have just forgotten to start the dishwasher. Make sure you press “Start/Resume” whenever you begin a cycle or open the dishwasher during a cycle. [13] X Research source
-
Call a repair technician to fix more complex problems. If your dishwasher still isn’t working, a blown fuse, computer issue, broken part, or other complex problem may be at hand. Schedule a service appointment with a KitchenAid technician on KitchenAid’s website , or call a local appliance technician to get your dishwasher fixed. [14] X Research source
- Repairs generally cost about $200.
- Get an appliance repair referral from a friend or look for a company online with good reviews.
Tip: Ask if the technician is willing to waive their “trip fee,” which is usually $50-$75, to lower the cost of the repair.
Advertisement
Expert Q&A
Search
-
QuestionHow can I know what method works for my model?Homer Flores is an Appliance Repair Specialist and Training Manager at PreFix, a home maintenance company out of Austin, Texas. With over 15 years of experience, Homer specializes in home improvement, remodeling, and construction. Homer’s dedication to the PreFix mission of providing hassle-free one-stop-shop service for home care, in addition to their completion of the Capital Factory and Techstars Accelerators, has contributed to their growth of service to over 50 zip codes throughout the greater Austin area.The best way to determine this is to locate the technical spec sheet located behind the toe kick plate and follow the specific steps from the manufacturer.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- The reset process might be different for your dishwasher depending on its model. Consult your machine’s user guide for how to reset your particular dishwasher.Thanks
- If you misplaced your dishwasher’s user manual, look up a PDF copy online. Simply search for your model plus the words “user manual” to get a virtual copy.Thanks
- If the dishwasher’s display panel works but some of the buttons don’t, the entire touchpad might need to be replaced.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- I kept having the start/resume blinking on my KitchenAid dishwasher and would have to push it for the machine to continue. Sometimes several times, and also I'd have to do a circuit breaker reset to get through a complete cycle. I did full control panel resets and still had the same issue. Finally, I pressed and held the cancel button until it did a reset and that fixed the problem. The dishwasher now runs complete cycles and ends with the clean light on.
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://producthelp.kitchenaid.com/Dishwashers/Product_Info/Dishwasher_Tips_and_Tricks/Resetting_the_Dishwasher's_Controls_(Cycle_Power)
- ↑ https://producthelp.kitchenaid.com/Dishwashers/Product_Info/Dishwasher_Tips_and_Tricks/Resetting_the_Dishwasher's_Controls_(Cycle_Power)
- ↑ https://youtu.be/XJnzzXJcOV4?t=148
- ↑ https://youtu.be/XJnzzXJcOV4?t=86
- ↑ https://youtu.be/XJnzzXJcOV4?t=120
- ↑ https://youtu.be/XJnzzXJcOV4?t=200
- ↑ https://www.kitchenaid.com/content/dam/global/documents/201808/owners-manual-w10751712-rev-c.pdf
- ↑ https://producthelp.kitchenaid.com/Dishwashers/Product_Info/Dishwasher_Product_Assistance/Dishwasher_Not_Starting_or_Not_Operating
- ↑ https://producthelp.kitchenaid.com/Dishwashers/Product_Info/Dishwasher_Product_Assistance/Dishwasher_Not_Starting_or_Not_Operating
- ↑ https://www.kitchenaid.com/content/dam/global/documents/201808/owners-manual-w10751712-rev-c.pdf
- ↑ https://youtu.be/TVvJCQW8P9g?si=lxNOCqBGS6rVUwUp&t=7
- ↑ https://producthelp.kitchenaid.com/Dishwashers/Product_Info/Dishwasher_Product_Assistance/Dishwasher_Not_Starting_or_Not_Operating
- ↑ https://www.kitchenaid.com/content/dam/global/documents/201808/owners-manual-w10751712-rev-c.pdf
- ↑ https://www.angieslist.com/articles/how-much-do-dishwasher-repairs-cost.htm
- ↑ https://fredsappliance.com/dishwasher-repair/how-to-reset-a-whirlpool-dishwasher/
- ↑ https://www.hunker.com/13407681/how-to-troubleshoot-the-test-cycle-on-a-bosch-dishwasher
- ↑ https://fredsappliance.com/dishwasher-repair/how-to-reset-a-whirlpool-dishwasher/
About This Article
Thanks to all authors for creating a page that has been read 213,248 times.
Reader Success Stories
- "The company site was useless. They only give the pull the plug solution. This site actually gives the reset info! Thanks." ..." more
Advertisement
"The company site was useless. They only give the pull the plug solution. This site actually gives the reset info! Thanks."
..."
more
