Download Article
Immediate steps to save your water-logged device
Download Article
This wikiHow teaches you how to prevent your laptop from sustaining damage immediately after spilling a liquid on it. Keep in mind that, while the information below provides the best way to handle a spill yourself, there is no way to guarantee without fail that your laptop can be saved; similarly, seeking professional help is a far better solution.
How to Fix a Water-Damaged Laptop
Turn off your laptop and disconnect it from power. Wipe any liquid from the laptop, then open it as wide as possible and set it facedown on a towel. If you can, remove the battery and internal hardware and dry them with a microfiber cloth. Let your laptop air dry for at least 24 hours before reassembly.
Steps
Download Article
-
Turn off the laptop and disconnect it from its power source immediately. To do so, just hold down the laptop's power button. If the liquid touches the circuits on the laptop while they are active, your laptop will most likely short out, so time is very much of the essence. [1] X Research source
- To disconnect the laptop from a power source, simply remove the charger cable from the laptop. It's typically on the left or right side of the laptop's housing.
-
Remove the laptop from any residual liquid. This will both minimize your laptop's exposure to more liquid and decrease the risk of electrical shock. [2] X Research sourceAdvertisement
-
Turn the laptop upside-down and remove the battery if possible. You can typically do this by turning your laptop upside-down, sliding a panel off of the bottom of the laptop, and gently tugging on the battery. [3] X Research source
- This step is not possible on some laptops, including MacBooks without first unscrewing the bottom of the laptop from the rest of the housing.
-
Unplug all external hardware. This includes the following items: [4] X Research source
- USB devices (flash drives, wireless adapters, chargers, etc.)
- Memory cards
- Controllers (e.g., your mouse)
- The laptop charger
-
Place a towel on a flat surface. This is where you'll place your laptop for the next couple of days, so make sure you choose a warm, dry, unobtrusive area.
-
Open your laptop as wide as possible and set it face-down on the towel. Depending on your laptop's flexibility, doing so will result in anything from a tent-shaped laptop to a completely flat one. To speed up the process of drying the liquid you can angle a fan at the liquid to help evaporate the liquid faster. [5] X Research source
-
Wipe up any obvious liquid. Places to wipe include the fronts and backs of the screen, the laptop's housing, and the keyboard.
- Make sure your laptop is still partially facing down while you do this so that any excess liquid continues to drain.
-
Ground yourself before touching your computer's internals. Grounding yourself will remove any static electricity from your clothing or body. Static electricity can easily kill circuitry, so performing this step before touching the RAM cards or the hard drive is crucial. [6] X Research source
-
Remove any hardware that you can. If you're uncomfortable or unfamiliar with the notion of removing RAM, your computer's hard drive, and other detachable internal components, consider taking your laptop into a professional repair service instead. [7] X Research source
- You can typically find manuals for your specific computer that detail hardware replacement and removal online. Simply search for your computer's make and model number followed by "RAM removal" (or whichever component you need to remove).
- For a MacBook, you'll first have to unscrew each of the ten screws holding the base of the housing together.
-
Pat dry any wet internal components. To do this, you will need a microfiber cloth (or an otherwise lint-free rag).
- If there is excess water in your laptop's internal areas, you first need to drain it.
- Be extremely gentle while doing this.
-
Remove dry residue. Use a lint-free cloth to buff out any non-water stains gently, or use compressed air to blow away dust, grit, and any other non-liquid residue. [8] X Research source
-
Let your laptop dry. You'll want to leave it alone for at least one day. [9] X Research source
- Consider storing your laptop in a dry, warm place. For example, a dehumidifier may improve drying time.
- Never use a hair dryer to speed up your laptop's drying process, as a hair dryer's heat concentration is intense enough to harm your laptop's internal parts.
-
Reassemble the laptop, then turn it on. If it doesn't boot up or you notice distortion in the sound or display, you'll need to take your laptop to a professional repair service (e.g., a Best Buy tech department). [10] X Research source
-
Remove any residue if necessary. Even if your laptop is up and running, you may have to contend with sticky or greasy substance left over. You can remove this residue by gently buffing the afflicted area with a damp, lint-free cloth as you used earlier when drying the laptop.
Advertisement
Community Q&A
Search
-
QuestionMy laptop got wet and I dried it out for several days. The touch pad is the only thing that seems to be affected, occasionally it doesn't respond. Is it worth having it checked out by a professional?Community AnswerThe circuitry may be damaged on your touchpad and it is probably worth getting a check, if you haven't already, try seeing if your touchpad was disabled by accident first.
-
QuestionMy brother spilled juice over my laptop. I cleaned the surface and didn't turn it off because I was confused but after 5 minutes the screen went black and colorful lines appeared on the screen and now it will not turn back on. What should I do?Community AnswerYou should have turned it off right away. It sounds like your laptop has shorted out and likely won't recover from this. Bring it in to a repair shop to find out if its fixable.
-
QuestionIf I immediately unplugged my computer when liquid was spilled on it, could it be all right?Community AnswerIt could, but every situation is different. I spilled milk on mine and turned it off and then back on 20 minutes later and it was fine, except for some speaker damage. So it really just depends how bad the spill was, where it got into the machine, etc.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Just because your laptop is working after drying does not mean it has been fixed. You should absolutely back up your data and take your laptop in for a thorough check-up.Thanks
- YouTube both tend to have comprehensive, advanced tutorials on stripping down a broken laptop.Thanks
- If at all possible, attempt to take a video of the entire disassemble process so you don't have any trouble reassembling the laptop.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Water and electricity do not mix! Make sure all plugs and other points of electrical contact are completely dry before connecting your laptop to a power source.Thanks
- Don't turn on your laptop in the middle of the drying process.Thanks
Advertisement
Things You'll Need
- Towel
- Various small screwdrivers
- Plastic bags to hold small parts and screws
- Lint-free cloth
References
- ↑ http://www.pcworld.com/article/3067332/hardware/when-water-coffee-or-liquid-spills-on-your-laptop-do-this.html
- ↑ https://www.macworld.co.uk/how-to/mac/what-do-if-you-spill-liquids-on-your-mac-3662982/
- ↑ https://www.computerrepairltd.co.uk/immediate-steps-to-water-damaged-laptop/
- ↑ https://www.nytimes.com/2018/06/29/smarter-living/what-to-do-if-you-spill-on-your-laptop.html
- ↑ https://www.isumsoft.com/it/fixed-spilled-water-on-your-laptop-keyboard-some-keys-not-working/
- ↑ https://blog.macsales.com/2225-discharging-static-electricity-for-safe-computer-upgrading
- ↑ https://www.digitaltrends.com/computing/what-to-do-if-you-spilled-water-on-your-laptop/
- ↑ https://www.theguardian.com/technology/askjack/2012/jul/05/drink-spilled-on-laptop
- ↑ http://www.makeuseof.com/tag/you-just-spilled-water-or-coffee-on-your-laptop-heres-what-you-should-do/
About This Article
Article Summary
X
1. Unplug the laptop and turn it off.
2. Remove the laptop from liquid.
3. Turn the laptop upside-down and remove battery.
4. Unplug external hardware.
5. Open the laptop and lay it down on a towel.
6. Wipe any obvious remaining liquid.
7. Remove all hardware you can.
8. Pat dry internal components and remove residue.
9. Let dry for at least 24 hours before turning back on.
Did this summary help you?
Thanks to all authors for creating a page that has been read 3,020,068 times.
Advertisement
