Download Article
Download Article
Fur pelts may seem difficult to sew together, but it is easier than you might think. You can sew fur pelts together by hand or using a sewing machine. You will just need a few special crafting tools and materials to get started. By connecting a few large pelts or several smaller pelts, you can make an attractive fur throw or rug.
Steps
-
Arrange the pelts how you want to sew them together. Before you sew the pelts together, figure out how you want them to go together. Look at the pelts with the fur sides up facing up and position them next to each other on a flat surface as desired. You may arrange the pelts in a way that looks nice to you, or you may use the edges of the pelts to see which ones will fit together well.
- Keep in mind that pelts come in different shapes and sizes depending on the type of animal fur. For example, beaver pelts are typically cut into the shape of an oval while coyote pelts are cut with the leg and tail sections sticking out from the body section. [1] X Research source
- If you are using small pelts, such as rabbit fur, then you may have lots of pelts to arrange. For example, it may take up to 50 rabbit pelts to make a small throw or lap blanket or up to 100 pelts to make a throw that is big enough for a double bed. [2] X Research source
- Make sure you have a large, flat area to work in so that you can spread out your pelts. Use a large table or clear a space on the floor.
-
Turn the pelts so the skins are facing up and line up the edges. You should only sew the pelts through the skins, and not through the fur. After you have finished arranging the pelts how you want them to fit together, turn the pelts so that the fur sides of the pelts are facing downward and the skins are facing up. Then, move the pelts together so that the edges of the skins are aligned.Advertisement
-
Cut the skins of the pelts with a rotary cutter or utility knife, if needed. You may find it easier to sew the pelts together if you cut some or all of the pelt skins to create flat edges. This will make it easier to line up the edges of the skins. However, do not use scissors to cut through the pelt skins because you may end up cutting some of the fur by accident. Instead, use a rotary cutter or utility knife to cut through the skin sides of the pelts. [3] X Research source
- Apply light to medium pressure to cut through the pelts and hold them steady as you cut them.
- You may want to measure and draw lines on the back side of the pelts first to ensure that you get accurate cuts.
-
Hold the fur pelts together with clips. Use some small or large binder clips to connect the edges of the fur skins. [4] X Research source Just clip them together so that about 0.5 inches (1.3 cm) of the skins are pressed together. This bit of skin should be on the skin side of the pelts, not on the fur side. [5] X Research source
- Binder clips are great for keeping fur pelts together because they will not leave holes in the skins.
- Do not overlap the skins.
Advertisement
-
Purchase a leather or furrier's needle. The leather on pelts vary in thickness, but all leather is fairly thick, so you will need a special needle to sew it by hand. You can purchase a special leather needle or furrier’s needle in a craft store or online. [6] X Research source
-
Thread the needle with waxed nylon, carpet-weight, or linen thread. A heavier thread works best for sewing pelts. [7] X Research source Cut a piece of thread that is about 18 inches (46 cm) long. Then, tie a knot in the end of the thread and insert the other end of the thread through the needle. Pull the thread through the eye of the needle until about 6 inches (15 cm) of the thread is hanging out on one side and the other 12 inches (30 cm) is hanging from the other side.
- You can find these special thread-types in a craft supplies store or online.
-
Use a whipstitch to sew the pelts together. When your needle is prepared, begin sewing through 2 of the skins you have clipped together. Start on one end of the pelts and work your way across to the other end of the pelts. To whipstitch, insert the needle through one side of the skin and then pull the thread all the way through on the other side until the knot is against the skin. Then, bring the needle around the edges of the skins and insert the needle through the skins on the same side as you did before. [8] X Research source
- Space the stitches so that they are about 0.25 inches (0.64 cm) to 0.5 inches (1.3 cm) apart.
-
Continue to stitch until you reach the end of the pelts. Continue to whipstitch all the way across the project. You will be done sewing when you have connected all of the pelts together. Each time you run out of thread, make sure to re-thread your needle and pick up where you left off.
-
Tie off the thread when you reach the end. Every time you need to re-thread the needle, make sure to tie off the thread. You can then tie the new thread end to the strand you just tied off and continue sewing. When you get to the very end of your project, tie off the last thread.
- If desired, you may also snip the excess threads above the knots.
Advertisement
-
Install a leather needle on your sewing machine. Leather needles have a wedge-shaped point that pierces through the leather more easily than other types of needles. [9] X Research source With your sewing machine turned off, unscrew the old needle from the sewing machine. You may be able to do this with just your fingers or you may need to use the small screwdriver that came with your machine. Pull out the old needle when the screw is loose enough. Then, insert the dull end of the new needle so that the flat edge is facing towards the back of your sewing machine. Tighten the screw to secure the needle. [10] X Research source
- A traditional sewing machine can damage the fur. Instead, use a specialized fur machine for your project. [11]
X
Expert Source
Seleh Rahman
Professional Tailor & Furrier Expert Interview. 25 June 2021. - You can find a leather needle for your sewing machine in a craft supply store or online. Look for a needle that is a size 80/12 through 110/18. The higher the number, the thicker the needle. [12]
X
Research source
Keep in mind that a standard sewing machine needle is too strong for your fur. [13]
X
Expert Source
Seleh Rahman
Professional Tailor & Furrier Expert Interview. 25 June 2021.
- A traditional sewing machine can damage the fur. Instead, use a specialized fur machine for your project. [11]
X
Expert Source
Seleh Rahman
-
Thread the machine with all-purpose or heavy duty thread. All-purpose thread is usually strong enough for sewing leather on a sewing machine, but you may select a heavy duty thread if desired. Check your local craft supply store or look online for a thread that is meant for leather or denim. This ensures that the thread will be strong enough to hold the pelts together. [14] X Research source
- Thread the machine as you normally would.
-
Set the machine to a wide straight stitch setting. The straight stitch setting is number 1 on most machines, but check your manual to be sure. Your sewing machine should also have a dial or digital screen where you can adjust the stitch width. Set the machine so that it will sew 7 to 9 stitches per 1 inch (2.5 cm). [15] X Research source Check your sewing machine's manual if you are not sure how to adjust the stitch width.
- If you're using a traditional sewing machine, place pieces of ribbon on top of the fur and beneath the sewing machine foot. This way, your machine won't damage the fur. [16]
X
Expert Source
Seleh Rahman
Professional Tailor & Furrier Expert Interview. 25 June 2021.
- If you're using a traditional sewing machine, place pieces of ribbon on top of the fur and beneath the sewing machine foot. This way, your machine won't damage the fur. [16]
X
Expert Source
Seleh Rahman
-
Sew about 0.25 inches (0.64 cm) from the edges of the pelts. Place the edges of 2 of your lined up pelts under the presser foot of the sewing machine and make sure that no fur is stuck between the edges. Then, sew along the edges of these pieces to connect them. Sew to the end of one section at a time.
- Snip the excess thread when you are finished sewing the pelts together.
Advertisement
Expert Q&A
Search
-
QuestionCan you sew fur with a regular sewing machine?Seleh Rahman is a Tailor, Furrier, and the Owner of Seleh de Federal Hill in Baltimore, Maryland. With over 45 years of experience, Seleh specializes in fur, alterations, and fashion illustration. Seleh studied Fashion Design and Tailoring at Bay College of Maryland. He holds certifications in fur, design, and tailoring.No, this isn't a good idea. Instead, use a fur machine to sew your fur pelts together.
-
QuestionWhy do my fur coats always end up getting messed up in the back?Seleh Rahman is a Tailor, Furrier, and the Owner of Seleh de Federal Hill in Baltimore, Maryland. With over 45 years of experience, Seleh specializes in fur, alterations, and fashion illustration. Seleh studied Fashion Design and Tailoring at Bay College of Maryland. He holds certifications in fur, design, and tailoring.You're sitting in it! Even if you're just driving for a few minutes, you've got to take the fur coat off. Fur is very unforgiving when it comes to friction so you really don't want to lean or rest against anything while you're wearing your fur.
-
QuestionWhat temperature should I be storing my pelts at?Seleh Rahman is a Tailor, Furrier, and the Owner of Seleh de Federal Hill in Baltimore, Maryland. With over 45 years of experience, Seleh specializes in fur, alterations, and fashion illustration. Seleh studied Fashion Design and Tailoring at Bay College of Maryland. He holds certifications in fur, design, and tailoring.I generally suggest keeping pelts at 69 degrees Fahrenheit or lower. Not only does the cooler temperature keep the fur healthy, but it's also going to keep bugs away. Moths are really a disaster for a fur pelt, and there are all kinds of other bugs that will damage them. Keeping the temperature on the cooler side should prevent a lot of that.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Things You’ll Need
- Fur pelts
- Rotary cutter or utility knife
- Binder clips
- Glover's, leather, or furrier's needle
- Waxed nylon, linen, or carpet-weight thread
- Sewing machine (optional)
- All-purpose thread (optional)
References
- ↑ http://munster.sasktelwebsite.net/FurSewing.html
- ↑ https://countrysidenetwork.com/daily/livestock/rabbits/sewing-rabbit-hides/
- ↑ https://www.motherearthnews.com/diy/sewing-rabbit-fur-zmaz83jfzraw
- ↑ https://www.motherearthnews.com/diy/sewing-rabbit-fur-zmaz83jfzraw
- ↑ http://sewway.com/sewing-of-fur-pelts-by-hand.html
- ↑ https://www.motherearthnews.com/diy/sewing-rabbit-fur-zmaz83jfzraw
- ↑ https://www.motherearthnews.com/diy/sewing-rabbit-fur-zmaz83jfzraw
- ↑ http://www.motherearthnews.com/diy/sewing-rabbit-fur-zmaz83jfzraw
- ↑ http://www.motherearthnews.com/diy/sewing-rabbit-fur-zmaz83jfzraw
- ↑ http://huntingforladybugs.com.au/changing-sewing-machine-needle/
- ↑ Seleh Rahman. Professional Tailor & Furrier. Expert Interview. 25 June 2021.
- ↑ http://www.sewing.org/files/guidelines/22_115_sewing_machine_needle_charts.pdf
- ↑ Seleh Rahman. Professional Tailor & Furrier. Expert Interview. 25 June 2021.
- ↑ http://www.motherearthnews.com/diy/sewing-rabbit-fur-zmaz83jfzraw
- ↑ http://www.motherearthnews.com/diy/sewing-rabbit-fur-zmaz83jfzraw
- ↑ Seleh Rahman. Professional Tailor & Furrier. Expert Interview. 25 June 2021.
About This Article
Thanks to all authors for creating a page that has been read 89,941 times.
Reader Success Stories
- "Wanted to be sure I could sew fur. I am glad to see such instructive directions. Thank you."
Advertisement
92%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Wanted to be sure I could sew fur. I am glad to see such instructive directions. Thank you."
