Download Article
Download Article
For many people, shoes are an incredibly important part of an outfit. To take it even further, countless creative ways of lacing these shoes have been devised, adding an even more personal spin to an already expressive element of the wardrobe. Figuring out how these complicated but stylish lacing methods have been achieved, however, is no easy task. If you've ever wondered how to recreate the clean look of straight laces, here are a few simple ways to choose from.
Steps
-
Insert shoelace into the first eyelets of your first shoe. Point the toe of the shoe away from you. The holes farthest from you will be called the first eyelets, and will successively count up from there. With the on the outside of the shoe, insert the ends down into the first eyelets on both sides. -
Make sure the shoelace ends are even. Pull both ends of the shoelace to their full length. Tug on whichever side is shortest until they are of an even length.You now have your first bar.Advertisement
-
Prepare to lace the second bar. Take the right end of the lace in your hand. Run it along the underside of the eyelets and then bring it up through the second eyelet on the right side. Do not skip an eyelet. You should not be able to see the shoelace between the eyelets.
-
Lace the second bar. Pull this same right lace straight across the shoe to the left side. Push it down through the second eyelet on the left side and pull it out until taught.
-
Prepare to lace the third bar. Take the left end of the shoelace and run it along the underside of the eyelets on the right side, skipping the second eyelet (which you have previously laced) until you reach the third eyelet. Bring it up through the third eyelet and pull until taught.
-
Lace the third bar. Pull the left lace straight across the shoe and push it down through the third eyelet on the right side. Pull until taught. You should now have three bars.
-
Prepare to lace the fourth bar. Take the lace that is now on the left side and run it along the underside of the eyelets from the second eyelet to the fourth, skipping the third eyelet which you have previously laced. Bring this left lace up through the fourth eyelet on the left side and pull through until taught.
-
Lace the fourth bar. Pull the left lace straight across the shoe and push it down through the fourth eyelet. Pull it through until taught.
-
Continue lacing. Repeat steps 5 through 8 until you reach the last eyelets nearest you. Remember:
- each time you run the lace beneath the eyelets you will skip one that has already been laced before you pull it up through one
- when you pull a lace across the shoe it will go down into the eyelet directly parallel to the one it came up through.
-
Finish off the lacing. Once you've reached the last eyelets, once again ensure that they are even. You may have to do a bit of adjusting further down the shoe.
-
Lace your other shoe. Repeat all of these steps in exactly the same way for your second shoe.
Advertisement
-
Insert shoelace into the first eyelets of your first shoe. With the toe of the shoe pointed away from you, the first pair of eyelets is the pair farthest from you. Insert the left end of the shoelace into the left eyelet and the right end into the right eyelet. [1] X Research source
-
Finish right lace. Run your right lace underneath the right row of eyelets toward you, all the way to the last eyelet. Pull it up through the final eyelet. [2] X Research source
-
Adjust the shoelace length. For this technique, the left lace is going to be doing all the work, so you want it to be much longer before you begin. Pull on the left lace until the remaining end of the right lace seems about long enough to tie a knot with when you are done. For now, make a rough estimate as you can adjust it more later.
-
Prepare to lace the second bar. Run the left lace toward you until you reach the next eyelet on the left side. Pull the lace up through this eyelet.
-
Lace the second bar. Pull the left lace across the shoe to the right side and push it down through the second eyelet on the right side. Pull the lace until it's taught. We will now refer to this lace as the "working lace."
-
Prepare to lace the third bar. Run the working lace toward you until you reach the next (third) eyelet on the right side. Pull the lace up through this eyelet.
-
Lace the third bar. Bring the working lace across the shoe to the left side. Push it down through the third eyelet on the left side. Pull the lace until it's taught.
-
Continue lacing. Using this same single lace, repeat steps 4 through 7 until you reach the last eyelet.
-
Adjust the lengths of the laces. Now that you've finished lacing, make sure once more that each lace is of approximately equal length. Pull on your working lace as far down the shoe as you need to go in order to make your non-working lace longer, or vice versa.
-
Lace your other shoe. Complete all of these steps on your second shoe.
Advertisement
Community Q&A
Search
-
QuestionAre there ways to tie it crisscross?Community AnswerYes, you can look up different patterns online. You can have different ones for different reasons. Maybe a tighter one for running, more support for hiking, etc.
-
QuestionHow do you tie the knot for "bar lacing" so that it isn't visible?iram khanCommunity AnswerTie a standard bow knot at the end of the bar lacing, and position it beneath the shoe's tongue for a clean look.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Straight lacing of any kind only works on shoes with an even number of eyelet pairs (i.e. 12 eyelet pairs, or 24 eyelets total). Solutions to this issue for odd eyelet-paired shoes (i.e. 9 eyelet pairs, or 18 eyelets total) include skipping one eyelet pair, tucking the ends in, or lacing one pair of eyelets with an alternative lacing style. [3] X Research sourceThanks
- For a hidden knot, complete either of the two methods above until you reach the second-to-last eyelet pair. Bring one of your laces up through its last eyelet and then across the shoe to go back down through the last eyelet on the other side. Tie your laces underneath the space between the second-to-last and last eyelets on this side. [4] X Research sourceThanks
- As you work, twist the laces so that they remain flat across the visible bars.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Two shoes
- Two shoelaces of appropriate length for the shoes you have
References
About This Article
Thanks to all authors for creating a page that has been read 424,924 times.
Reader Success Stories
- "I love that you made this nice and simple. I needed a lot of help with tying my shoes since the laces wore out. But I found this website and I am almost a professional. Thank you for the help!" ..." more
Advertisement
"I love that you made this nice and simple. I needed a lot of help with tying my shoes since the laces wore out. But I found this website and I am almost a professional. Thank you for the help!"
..."
more
"Have high type of foot arches, this would take some pressure off of the top of foot without leaving bulging, loose-looking shoelaces. Thank you much for this great idea! "
..."
more
