How to Test a Capacitor

PDF download Download Article
PDF download Download Article

Capacitors are voltage storage devices used in electronic circuits, such as those found in heating and air conditioning fan motors and compressors. Capacitors come in 2 main types: electrolytic, which are used with vacuum tube and transistor power supplies, and non-electrolytic, which are used to regulate direct current surges. Electrolytic capacitors can fail by discharging too much current or by running out of electrolyte and being unable to hold a charge. Non-electrolytic capacitors most often fail by leaking their stored charge. [1] There are several ways to test a capacitor to see if it still functions as it should.

Method 1
Method 1 of 5:

Using a Digital Multimeter With Capacitance Setting

PDF download Download Article
  1. [2]
  2. The unit for capacitance is the farad, which is abbreviated with a capital “F.” You may also see the Greek letter mu (µ), which looks like a lowercase “u” with a tail in front of it. (Because the farad is a large unit, most capacitors measure capacitance in microfarads; a microfarad is a millionth of a farad.)
    Advertisement
  3. [3]
  4. Connect the positive (red) multimeter lead to the capacitor anode lead and the negative (black) lead to the capacitor cathode lead. (On most capacitors, especially electrolytic capacitors, the anode lead is longer than the cathode lead.) [5]
  5. If the capacitance reading on the multimeter is close to the value printed on the capacitor itself, the capacitor is good. If it’s significantly less than the value printed on the capacitor, or zero, the capacitor is dead. [7]
    Know which caps function or fail in a batch. "When several circuits in our electronics lab stopped working, I tested each capacitor using the multimeter technique. It was tedious but worth it — I identified the bad capacitors right away and replaced them. Now, our projects are back up and running thanks to this guide." - Brian C.
    Troubleshoot with basic tools. "As an electrician, having a fully stocked toolkit isn't always possible when making house calls. I've run into issues that required testing capacitors without my normal equipment. Using just a voltmeter and multimeter, I could follow the steps here to confirm whether the caps were still working. It's been a handy reference when I need to improvise." - Anthony C.
    See concepts click during a practical exam. "I struggled to grasp capacitor charging and discharging. But watching the voltmeter needle move when testing a capacitor made everything click! Doing the hands-on exercises broke the process down in a way lectures couldn't. I owe my passing grade on the electronics exam to this guide." - John T.
    Learn the cause of capacitor failure. "For years, the capacitors in my AC unit failed each summer. I replaced them, but it kept happening. When one finally leaked all over, I learned how heat damages electrolytic capacitors over time. Now I know to check and replace them annually before the cooling season starts. Could have saved myself money and headaches." - Emilio M.
    Did you know that wikiHow has collected over 365,000 reader stories since it started in 2005? We’d love to hear from you! Share your story here .
    6. Advertisement
Method 2
Method 2 of 5:

Using a Digital Multimeter Without Capacitance Setting

PDF download Download Article
  2. This setting may be marked with the word “OHM” (the unit for resistance) or the Greek letter omega (Ω), the abbreviation for ohm.
    • If your unit has an adjustable resistance range, set the range to 1000 ohm = 1K or higher.
  3. Again, connect the red lead to the positive (longer) terminal and the black lead to the negative (shorter) terminal.
  4. Write down the initial resistance value, if you wish. The value should soon revert to what it was before you connected the leads.
  5. You should see the same results as on the first test. If you do, the capacitor is good.
    • If, however, the resistance value does not change on any of the tests, the capacitor is dead. [8]
    6. Advertisement
Method 3
Method 3 of 5:

Using an Analog Multimeter

PDF download Download Article
  2. As with the digital multimeter, it may be marked “OHM” or with an omega (Ω).
  3. Red lead to positive (longer) terminal, black lead to negative (shorter) terminal.
  4. Analog multimeters use a needle to display their results. How the needle behaves determines whether or not the capacitor is good.
    • If the needle initially shows a low resistance value then gradually moves towards infinity, the capacitor is good.
    • If the needle shows a low resistance value and doesn’t move, the capacitor has been shorted out. You’ll need to replace it.
    • If the needle shows no resistance value and doesn’t move or a high value and doesn’t move, the capacitor is an open capacitor (dead). [9]
    5. Advertisement
Method 4
Method 4 of 5:

Testing a Capacitor With a Voltmeter

PDF download Download Article
  1. You may, if you wish, disconnect only 1 of the 2 leads from the circuit. [10]
  2. This information should be printed on the outside of the capacitor as well. Look for a number followed by a capital “V,” the symbol for “volt.”
  3. For a 25V capacitor, you could use a voltage of 9 volts, while for a 600V capacitor, you should use a voltage of at least 400 volts. Let the capacitor charge for a few seconds. Be sure to connect the positive (red) lead from the voltage source to the positive (longer) capacitor terminal and the negative (black) lead to the negative (shorter) terminal.
    • The greater the discrepancy between the capacitor’s voltage rating and the voltage you’re charging it with, the longer it will take to charge. Generally, the higher voltage of the power supply you have access to, the higher the voltage ratings of the capacitors you can test with ease. [11]
  5. Connect the positive(red) lead to the positive (longer) terminal and the negative (black) lead to the negative (shorter) terminal.
  6. This should be close to the voltage you supplied the capacitor with. If it isn’t, the capacitor is no good.
    • The capacitor will discharge its voltage into the voltmeter, causing its reading to drop back to zero the longer you have the leads connected. This is normal. Only if the initial reading is much lower than the expected voltage should you be concerned. [12]
    7. Advertisement
Method 5
Method 5 of 5:

Shorting the Capacitor Terminal

PDF download Download Article
  2. Again, connect the positive (red) lead to the positive (longer) terminal and the negative (black) lead to the negative terminal.
  3. You should leave these connected for no longer than 1 to 4 seconds.
  4. This is to prevent damage to the capacitor when you perform the task and to reduce the likelihood of your getting an electric shock.
  5. Be sure to wear insulated gloves and not to touch anything metal with your hands when you do this.
  6. The possible spark will give you an indication of the capacity of the capacitor.
    • This method will only work with capacitors that can hold enough energy to produce a spark when shorted.
    • This method is not recommended because it only can be used to determine if the capacitor can hold a charge, capable of sparking when shorted, or not. It can not be used to check if the capacity of the capacitor is within the specifications.
    • Using this method on larger capacitors could result in serious injury or even death!
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How can I test a fuel pump?
    Community Answer
    If electric, when you turn the key to the "ON" position you should be able to hear a clicking from the tank. If it clicks and the car wont run, open the line at one end. This is the fuel line that feeds the fuel rail. Now have someone watch the line as you turn your key to on. If no fuel comes out find the fuel filter, disconnect the end that feeds the filter and have someone turn the key just to the "on" position. Be careful -- gas could shoot out of the line! If gas comes out, change your filter then see if it starts. If no gas comes out of the line, I would change the fuel pump out. Please be careful when messing with any fuel accessories.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 7
  • Question
    If the plastic housing on a capacitor is busted, is that a sign of a bad capacitor?
    Community Answer
    Yes, it is. That is the easy way of checking for bad capacitors. Busted caps or stuff leaking out are good signs of a bad capacitor.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 6
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Non-electrolytic capacitors generally are not polarized. When testing these capacitors, you can connect the leads from the voltmeter, multimeter, or power supply to either capacitor terminal. [13]
        Thanks
        Helpful 0 Not Helpful 0
      • Non-electrolytic capacitors are subdivided by the types of materials they are made of -- ceramic, mica, paper, or plastic – with the plastic capacitors further subdivided by the type of plastic. [14]
        Thanks
        Helpful 1 Not Helpful 0
      • Capacitors used in heating and air conditioning systems are subdivided by purpose into 2 types. Run capacitors maintain constant voltage to the fan motors and compressors in furnaces, air conditioners, and heat pumps. Start capacitors are used in units with higher-torque motors in some heat pumps and air conditioners to provide the extra energy needed at startup. [15]
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You’ll Need

      • Analog or digital multimeter (or dedicated ohmmeter)
      • Voltmeter
      • Insulated gloves
      • Power supply, preferably an adjustable power supply
      • Metal tool for shorting capacitor test (such as a screwdriver)
      • Capacitor to test


      You Might Also Like

      How to
      Measure Amperage
      How to
      Read a Capacitor
      How to
      Calculate Wattage
      How to
      Test a Relay
      How to
      Measure Inductance
      How to
      Test a Potentiometer
      How to
      Test Voltage with a Multimeter
      How to
      Interpret Your Residential Electrical Meter
      How to
      Determine Amperage of Circuit Breaker
      How to
      Calculate Kilowatt Hours
      How to
      Measure Capacitance
      How to
      Calibrate, Use, and Read an Ohmmeter
      How to
      Test a Resistor with a Multimeter
      How to
      Build a Calorimeter
      Advertisement

      References

      1. ↑ https://electric-shocks.com/testing-capacitor/
      2. ↑ Daniel Stoescu. Master Electrician. Expert Interview. 16 August 2021.
      3. ↑ Daniel Stoescu. Master Electrician. Expert Interview. 16 August 2021.
      4. ↑ Daniel Stoescu. Master Electrician. Expert Interview. 16 August 2021.
      5. ↑ http://www.learningaboutelectronics.com/Articles/How-to-test-a-capacitor
      6. ↑ Daniel Stoescu. Master Electrician. Expert Interview. 16 August 2021.
      7. ↑ http://electricaltechnology.org/2013/06/how-to-check-capacitor-with-digital.html
      8. ↑ http://electricaltechnology.org/2013/06/how-to-check-capacitor-with-digital.html
      9. ↑ http://electricaltechnology.org/2013/06/how-to-check-capacitor-with-digital.html
      1. ↑ www.angelfire.com/electronic/funwithtubes/Testin g_caps.html
      2. ↑ www.angelfire.com/electronic/funwithtubes/Testing_c aps.html
      3. ↑ http://www.learningaboutelectronics.com/Articles/How-to-test-a-capacitor
      4. ↑ http://www.learningaboutelectronics.com/Articles/How-to-test-a-capacitor
      5. ↑ https://electric-shocks.com/testing-capacitor/
      6. ↑ http://www.hvac-for-beginners.com/capacitor-testing.html

      About This Article

      Article Summary X

      To test a capacitor using a digital multimeter with a capacitance setting, start by disconnecting the capacitor from the circuit it’s a part of. Next, read the capacitance value on the outside of the capacitor, and set your multimeter to its capacitance setting. Then, connect the multimeter leads to the capacitor terminals. Once everything is hooked up, check the reading. If it’s close to the value printed on the capacitor, it’s good. However, if the number is significantly less than the value printed on the capacitor setting, it’s dead. To learn how to use a digital multimeter without capacitance setting, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 513,347 times.

      Reader Success Stories

      • Anthony C.

        Jun 29, 2017

        "As an electrician, having a fully stocked toolkit isn't always possible when making house calls. I've run ..." more
        Rated this article:
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement