How to Thread a Singer Sewing Machine

PDF download Download Article
PDF download Download Article

Singer sewing machines have to be threaded in a specific way. Otherwise, you may end up with a thread jam in your stitches, or you may not be able to make stitches at all! Start by getting your sewing machine ready to thread. Then, thread the top portion of your machine. After that, load the bobbin and turn the wheel to catch your thread!

Part 1
Part 1 of 3:

Raising the Needle and Presser Foot

PDF download Download Article
  1. Locate the power switch on the side of your sewing machine, and switch it to the off position. Do this before you try to thread your sewing machine. [1]
    • You will be inserting the thread through moving parts of the sewing machine. If the machine remains on and you accidentally apply pressure while trying to thread the machine, you could seriously injure your fingers.
  2. Since the power is switched off, you will need to adjust the moving parts manually. Turn the wheel on the right side of your sewing machine in clockwise to move the needle upwards. Stop turning when the needle is at its highest point. [2]
    • If you keep turning the wheel, the needle will move back down again, so make sure to stop turning when it reaches its highest point.
    Advertisement
  3. Locate the lever next to the needle base on your machine. Push this lever upwards to raise the presser foot. [3]
    • Having the presser foot in this position will make it easier to thread the machine because it will be out of the way.
    4. Advertisement
Part 2
Part 2 of 3:

Threading the Top of the Machine

PDF download Download Article
  1. Wind the bobbin before you thread the top part of your machine. If you don’t have a pre-wound bobbin already, wind a bobbin now. Place a spool of thread onto the spool pin and move the bobbin winder pin to the far left. Insert the end of the thread through the hole in the rim of the bobbin and place the bobbin onto the winder pin. Push the bobbin pin back to the right. Then, apply gentle pressure to the pedal to begin winding the bobbin. [4]
    • Continue to apply pressure to the pedal until the bobbin is wound and thread is nearly even with the rim of the bobbin.
  2. The spool pin should be located on the top of your sewing machine. Place a full spool of thread onto the pin until it locks in place. You should hear or feel it click. [5]
    • If your sewing machine has a horizontal spool pin, then you will also need to place a cap on top of the pin to hold the spool in place.
    • It does not matter what direction the thread is going when you place it onto the spool pin.
  3. The first thread guide will be on the top of the machine above the needle apparatus. If you have the manual to your machine, look at the chart that indicates the function of each of the parts to locate this guide. [6] Grasp the end of the thread on the spool and pull it across the top of the sewing machine to the first thread guide. Bring the thread through the slot under the thread guide. Wrap the end over the top of the thread guide and then wrap it around to the right side of the guide. [7]
    • As long as the thread is going through the guide and out on the right side, it should be fine.
  4. The second thread guide will be next to the first thread guide. Use your instruction manual to locate it if possible. Go into the guide from the right underside of it. Then, bring the end of the thread over the top of the guide. After you do this, grasp the thread on either side of the thread guide and move the thread to the end of the guide. [8]
  5. Next, pull the end of the thread and wrap it around the tension mechanism, which is directly at the bottom of the threading canal. The threading canal is a grooved area on the side of your sewing machine. Bring the thread through the canal and around the bottom of the canal to go through the tension mechanism. [10]
  6. When you have the thread through the tension mechanism, bring it back up on the other side of the threading canal. Then, bring the thread over the take up lever at the top of the canal. [12]
    • The take-up lever also helps to control the tension on your machine.
  7. Next, bring the end of the thread back down through the last part of the threading canal. When you get to the bottom of the canal, insert the thread through the thread guide that is located above the needle. [13]
    • This guide should be right where the blunt end of the needle is attached to your sewing machine.
  8. Keep pulling the thread down towards the eye of the needle. Then, insert the end of the thread through the eye of the needle and pull the end through by about 6 inches (15 cm) past the eye of the needle. [14]
    • If the end of the thread is frayed, cut about 0.5 in (1.3 cm) from the end. This should make it easier to thread the needle. You can also stiffen the end of the thread using water, saliva, or beeswax to make it easier to thread your needle.
    9. Advertisement
Part 3
Part 3 of 3:

Loading the Bobbin

PDF download Download Article
  1. The needle needs to be up and out of the way to load the bobbin case, so turn the wheel until it is at its highest position. This should only take about a half a turn. [15]
    • If you already raised the needle to thread the top portion of the machine, leave the needle where it is at.
  2. The bobbin case is located directly beneath the needle on your sewing machine. Look for a button or tab on the bobbin case. Press the button or lift the tab to open the case. [16]
    • The case should be empty, but if there is an empty bobbin inside you can remove it.
    • If you do not have a front loading bobbin machine, there will be a case that you will have to remove and open.
  3. There should be arrows around the outside of the case. Use these arrows to determine which way the thread should be going. Then, place the bobbin into the case so that you can move the thread in this direction. [17]
    • For example, if the arrows indicate that the thread should go along the left side of the bobbin and then up, then place the bobbin into the case with the thread going in this direction.
    • If the machine does not have a front-loading case, you will need to put the bobbin into the open case after you have taken it out of the machine and then close it back up.
  4. This will be enough slack for the bobbin thread to catch and connect with the top thread. If there is not enough thread, you won’t be able to make stitches. [18]
    • You don’t have to measure the thread. You can just estimate 6 inches (15 cm). It’s okay if there is a little more or less thread.
    • For a case that you remove and load outside of the machine, inspect the case for a hole to bring the thread through before you close the case. Pull out 6 inches (15 cm) of thread.
  5. Once the thread is through the slot, you can put the lid back onto the bobbin case to secure the bobbin. Press on the lid until it snaps into place. [19]
    • If you had to remove the bobbin case from the machine to load it, close the case and then put the case back into the slot under the needle and close that as well.
  6. With the bobbin lid secured, turn the wheel on the side of the machine to catch the bobbin thread. This will connect the top and bottom threads and pull up some of the bobbin thread so that it is visible. Gently tug at the 2 threads when they come up. They will appear as a loop, which you can push to the back of the machine to move them out of the way. [20]
    7. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    How do you thread a sewing machine by yourself?
    Alterations Express
    Alteration, Tailoring, and Dry Cleaning Specialists
    Alterations Express is a salon-style alteration and tailoring house with walk-in service, spacious dressing rooms, fitting specialists, and an extraordinary team of tailors and seamstresses at 13 storefront locations. With over 70 years of experience, they specialize in guiding individuals through a professional fitting, evaluating an alteration project on the spot, express alterations, and immediately providing pricing for any alteration. Alterations Express has been featured on multiple websites such as TheKnot.com.
    Alterations Express
    Alteration, Tailoring, and Dry Cleaning Specialists
    Expert Answer
    Read the instructions and watch a video tutorial for your sewing machine model. Take plenty of time to study the video so you understand where everything is supposed to go.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    How can a beginner thread a sewing machine?
    Andrea Beaulieu
    Professional Tailor & Fashion Designer
    Andrea Beaulieu is a Professional Tailor, Fashion Designer, and the Owner of MOORE, a Brooklyn, New York based storefront and apparel workshop for gender-neutral, contemporary streetwear as well as custom-tailored products. Andrea has over 20 years in the fashion design and marketing industries and specializes in pattern making, draping, and the construction of garments. She holds a BS in Fashion Design and Merchandising from the University of North Carolina at Greensboro.
    Andrea Beaulieu
    Professional Tailor & Fashion Designer
    Expert Answer
    If you still have the manual for your machine, read through it so you know how everything properly works and where your thread should go.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 3
  • Question
    I am new to sewing with a machine. I have a Singer 3337, and I am having a lot of trouble with threads breaking. What can I do?
    Community Answer
    It sounds like the tension is set too high, or maybe the thread is old. Make sure you are using nylon, not cotton, as cotton thread breaks very easily.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 17
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If possible, try to find the manual for your sewing machine. You may be able to find it by searching online or by calling Singer and asking for a replacement copy. [22]
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Thread a Sewing Machine
      How to
      Use a Sewing Machine: Setup, Threading, Stitching & More
      How to
      Oil a Sewing Machine
      How to
      Thread a Kenmore Sewing Machine
      How to
      Operate a Mini Sewing Machine
      How to
      Adjust the Tension on a Sewing Machine
      How to
      Thread a Singer Simple 3116
      A Beginner’s Guide to Thread a Bobbin
      How to
      Thread a Brother Ls 1217 Sewing Machine
      How to
      Thread a Necchi Sewing Machine
      Advertisement

      References

      1. ↑ https://www.singer.com/sewing-resources/threading-my-machine-main
      2. ↑ https://www.singer.com/sewing-resources/threading-my-machine-main
      3. ↑ https://www.singer.com/sewing-resources/threading-my-machine-main
      4. ↑ https://www.singer.com/sewing-resources/winding-a-bobbin-alt
      5. ↑ https://www.singer.com/sewing-resources/threading-my-machine-main
      6. ↑ Andrea Beaulieu. Professional Tailor & Fashion Designer. Expert Interview. 8 May 2020.
      7. ↑ https://www.singer.com/sewing-resources/threading-my-machine-main
      8. ↑ https://www.singer.com/sewing-resources/threading-my-machine-main
      9. ↑ Alterations Express. Alteration, Tailoring, and Dry Cleaning Specialists. Expert Interview. 15 September 2021.
      1. ↑ https://www.singer.com/sewing-resources/threading-my-machine-main
      2. ↑ Alterations Express. Alteration, Tailoring, and Dry Cleaning Specialists. Expert Interview. 15 September 2021.
      3. ↑ https://www.singer.com/sewing-resources/threading-my-machine-main
      4. ↑ https://www.singer.com/sewing-resources/threading-my-machine-main
      5. ↑ https://www.singer.com/sewing-resources/threading-my-machine-main
      6. ↑ https://www.singer.com/sewing-resources/inserting-top-drop-in-bobbins
      7. ↑ https://www.singer.com/sewing-resources/inserting-top-drop-in-bobbins
      8. ↑ https://www.singer.com/sewing-resources/inserting-top-drop-in-bobbins
      9. ↑ https://www.singer.com/sewing-resources/inserting-top-drop-in-bobbins
      10. ↑ https://www.singer.com/sewing-resources/inserting-top-drop-in-bobbins
      11. ↑ https://www.singer.com/sewing-resources/inserting-top-drop-in-bobbins
      12. ↑ Andrea Beaulieu. Professional Tailor & Fashion Designer. Expert Interview. 8 May 2020.
      13. ↑ https://www.singer.com/sewing-resources/threading-my-machine

      About This Article

      Article Summary X

      To thread a Singer sewing machine, first switch it off, raise the needle, and lift the presser foot. Next, place a full spool onto the pin, thread the end through the guides, and then thread it through the threading canal. Then, insert the thread into the needle eye and pull it through by about 6 inches. Now, load the bobbin, pull its thread about 6 inches through, and close the case up. Finally, turn the hand crank clockwise a few times to catch the thread. For more tips, including how to wind the bobbin, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 414,538 times.

      Reader Success Stories

      • Anonymous

        May 23, 2017

        "It was great. I have used the same sewing machine for 40 years and alas, it gave out. No parts are available for ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement