PDF download Download Article PDF download Download Article

Oil lamps are useful to have around for power outages and camping trips, but they're more than just practical tools! Their warm, intimate glow is perfect for mood lighting and they make stunning decor at weddings and parties. There are tons of styles to choose from, from basic utilitarian storm lamps to ornate glass designs and gorgeous antiques. No matter what kind of oil lamp you have, operating it is really easy! All you need is lamp oil and a flame to light the lamp's wick.

Part 1
Part 1 of 2:

Filling the Lamp with Oil

PDF download Download Article
  1. Use the oil that the manufacturer recommends for your lantern. In most cases, this is kerosene or standard lamp oil. Always buy a clear, clean-burning oil (the label should say this clearly) for your lamp. Other oils release toxic fumes as they burn, and you definitely want to avoid breathing those in. [1]
    • Natural alternatives like canola, vegetable, or olive oil can work in a pinch, but they tend to cause clogs. [2]
    • Never use gasoline, Coleman fuel, white gas, paint thinner, wood alcohol, diesel, naphtha, turpentine, or any other explosive fuel in an oil lantern. [3]
  2. Clear kerosene and lamp oil work great for outdoor lanterns too, but since fumes are less of a concern outside, you have a few more options. Non-purified kerosene and citronella are both safe to use in outdoor lanterns. [4]
    • Citronella oil is particularly useful on camping trips since it's an effective mosquito deterrent.
    • Paraffin oil is also an option, but it doesn’t burn well or as brightly.
    Advertisement
  3. Watermark wikiHow to Use an Oil Lantern
    There are 2 main lamp styles: spring-loaded hurricane lanterns and indoor oil lamps. If yours has a sturdy metal frame with a metal ring on top, it's a spring-loaded lamp. To get to the oil reservoir, just unscrew the small, round cap on the lantern's base. [5]
    • Since spring-loaded lamps are sturdy and completely enclosed, they're less likely to spill.
    • You can use spring-loaded lamps indoors, too! Just remember to use clear kerosene or lamp oil when you're inside.
    • You can’t miss the fuel cap – it looks like a screw-off bottle cap.
  4. Watermark wikiHow to Use an Oil Lantern
    Indoor lamps are usually placed on tabletops or other sturdy surfaces to light a room. These usually don't have metal frames or springs—you just lift the globe right off the top of the lamp. Then, unscrew the metal burner from the base to get to the oil reservoir. [6]
    • Indoor lamps aren't as sturdy as the spring-loaded variety. Don't use them for camping or outdoor use unless you have to.
  5. Watermark wikiHow to Use an Oil Lantern
    For narrow openings, use a funnel to add oil to the reservoir without making a mess. Otherwise, just pour the oil straight in. Don’t fill up the reservoir completely, though! Fill it about 2/3 of the way and then screw the cap back on if you have a spring-loaded lamp. If you have an indoor lamp, screw the metal burner back on.
    • Oil volume expands as it heats up. If you fill the reservoir up all the way, the hot oil could overflow. [7]
    • Oil lamps burn about 1 ounce (30 ml) of lamp oil or kerosene per hour.
  6. Watermark wikiHow to Use an Oil Lantern
    It takes a brand-new wick a few minutes to soak up the oil. Wait until the wick is saturated with oil before lighting it. To check, just touch the end of the wick to make sure it feels wet. If it does, you’re all set! If it feels dry, wait a few more minutes. [8]
    • A dry wick creates a lot of smoke and burns unevenly, so it's worth the wait!
  7. Advertisement
Part 2
Part 2 of 2:

Lighting the Wick

PDF download Download Article
  1. Watermark wikiHow to Use an Oil Lantern
    To get to the metal burner and wick, push the springs down on the sides of the globe. Then, gently pull straight up on the metal top of the lamp to release and remove the globe. [9]
    • The metal top of a spring-loaded oil lamp is called a chimney.
    • If you have an indoor lamp, you don't need to do anything. You removed the globe earlier to add the oil. If you happened to put the globe back on, just lift it off again.
  2. Watermark wikiHow to Use an Oil Lantern
    The small metal dial, which looks like a tiny gear, is the wick adjuster. Twisting the dial allows you to adjust the wick up and down. Turn the dial to feed the wick through the metal burner until about 1 in (2.5 cm) of the wick is exposed. [10]
    • You can lift the wick up more than this if you need better access to trim it. Just be sure to lower it back to the 1 in (2.5 cm) point before lighting it!
  3. Watermark wikiHow to Use an Oil Lantern
    If the lamp has been used before, the wick will have a charred edge from the previous burn. To get rid of the charred end, just cut straight across the wick's tip with sharp scissors.
    • Leaving the charred edge on your wick will create a lot of smoke.
  4. Watermark wikiHow to Use an Oil Lantern
    Most brand-new wicks have flat tips. It's fine to light the flat wick as is, but trimming it changes the brightness of the light. Pointed wicks tend to create the brightest light. Keep in mind the oil will burn a little faster this way, though! [11] Other options:
    • Flat tip (slower burn, medium brightness)
    • Round tip (cleaner burn, medium brightness)
    • Double-point tip (very bright) [12]
  5. Watermark wikiHow to Use an Oil Lantern
    For indoor lanterns, just grab a regular lighter, flick it, and hold the flame over the tip of the wick. The wick should catch fire easily. Then, gently put the glass globe back in place to shield the flame. [13]
    • If you had to unscrew the globe, be sure to screw it back in firmly. [14]
  6. Lift the chimney and place the globe over the burner. Let go of the chimney and raise the springs up on each side of the globe. To access the burner assembly, pull down the lever to raise the globe. Hold a match over the burner to light the wick. [15]
    • Once the wick is lit, just raise the lever back up to its original position. This lowers the globe into place.
  7. Watermark wikiHow to Use an Oil Lantern
    Adjust the wick until only the flame is visible, not the wick itself, for a standard amount of light. To increase or decrease the brightness, use the wick adjuster. Raising the wick creates brighter light and lowering it dims the light. [16]
    • If the wick is creating black smoke, the flame is too big.
  8. Flat, stable surfaces like tabletops are best, especially indoors. Choose a spot far away from flammable drapes and decorations. Make sure kids and pets can't get close to the lamp to avoid dangerous spills. [17]
    • It's safe to hang a spring-loaded lantern from a nail or hook as long as it has a metal ring on top.
  9. Watermark wikiHow to Use an Oil Lantern
    Never burn your lamp unattended! If you're leaving the area or going to sleep, extinguish the lantern first. Use the wick adjuster to lower the wick all the way until the flame goes out. [18]
    • If your lamp is getting low on oil, extinguish the flame before adding more to prevent fire hazards. Never add oil to a lamp with an active flame. [19]
  10. Advertisement

Video

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Never top off the oil tank when the lantern is lit. Extinguish the flame first.
      • Never leave a burning oil lamp unattended.
      • Don't pour gasoline, Coleman fuel, white gas, paint thinner, wood alcohol, diesel, naphtha, turpentine, or any other explosive fuel in your oil lantern. [21]
      Advertisement

      Things You’ll Need

      • Kerosene or lamp oil
      • Scissors
      • Lighter or matches

      About This Article

      Thanks to all authors for creating a page that has been read 49,343 times.

      Did this article help you?

      Advertisement