Download Article
Download Article
Is your iPod frozen and unresponsive? Many software glitches can be fixed by simply force restarting or resetting your iPod, but you can always restore it to factory settings if a force restart didn't work. This wikiHow article shows you how you can easily reset any iPod Touch, or iPod Nano, as well as how to restore your iPod back to its original factory settings.
Things You Should Know
- Resetting varies on model type and year, so make sure you know which generation of iPod you have. Many times, you can find the model number on the back.
- You can easily force reset your iPod by tapping or holding a few buttons until the Apple Logo appears.
- If resetting your iPod doesn't work to fix your issues, you can try restoring it.
Steps
-
Press and hold the Top button. If you just press this button quickly, the screen will turn off. But to force your iPod to restart, press it and keep it held down. [1] X Research source
- The iPod touch 7th Gen was introduced May 2019 with the model number A2178, which you can find on the back of your iPod. The iPod nano 6th gen is square-shaped and was introduced in September 2010 with a model number A1366, which you can find on the back.
-
Press and hold the Volume Down button. It's on the side of your phone and usually turns your volume down. [2] X Research sourceAdvertisement
-
Hold the buttons down for at least 10 seconds. You should see your screen turn off and then turn on to display an Apple logo. [3] X Research source
- Let go when you see the Apple logo.
- If you have an iPod touch, you can prompt it to reset and restart in Settings by going to Settings > General > Reset > Reset All Settings . This is essentially like restarting your iPod and will not remove any data from your device, but all your settings (like Wi-Fi connections and your keyboard dictionary) will be reset. [4] X Research source
Advertisement
-
Press and hold the Top button. If you just press this button quickly, the screen will turn off. But to force your iPod to restart, press it and keep it held down.
- The iPod touch 6th gen was introduced in July 2015 with model number A1574 and the iPod nano 7th Gen came out in October 2012 with model number A1446. [5] X Research source
-
Press and hold the Home button. It's the circular button near the bottom of your phone. [6] X Research source
-
Hold the buttons down for at least 10 seconds. You should see your screen turn off and then turn on to display an Apple logo. [7] X Research source
- Let go when you see the Apple logo.
- If you have an iPod touch, you can prompt it to reset and restart in Settings by going to Settings > General > Reset > Reset All Settings . This is essentially like restarting your iPod and will not remove any data from your device, but all your settings (like Wi-Fi connections and your keyboard dictionary) will be reset. [8] X Research source
Advertisement
-
Slide the Hold switch into the unlocked position. It'll show white to indicate that it is unlocked. All 5th generation iPod nano's look similar : they feature rectangle or square screens with click wheel navigation.
- You'll find the "Hold" switch on the top, side, or bottom of the nano.
-
Press and hold the Center button and the Menu button at the same time. The Center button is also called the Select button. [9] X Research source
- Keep these buttons held down.
-
Wait for the Apple logo to appear and release the buttons. The screen will go black and the Apple logo will appear.
- This takes at least 8 seconds. [10] X Research source
Advertisement
-
Move the On / Off switch on the iPod to the "Off" position. When powered off, the green stripe underneath the Power switch will not be visible on the iPod Shuffle . [11] X Research source
- If your Shuffle is connected to a computer, disconnect it to continue. The reset cannot happen while the USB cable is being used.
- This only resets your iPod, but will not restore it to factory settings . In that case, you'll need to use iTunes or Finder to clear your iPod.
-
Wait at least ten seconds. This allows enough time for the iPod to power off completely and reset. [12] X Research source
- Keep in mind that if you don't wait at least 10 seconds, you will effectively have turned it off and turned it back on again which might not fix anything. The full 10 seconds are needed for the reset to happen.
-
Move the playlist button to the "shuffle" or "play in order" position. The green stripe will now be visible, and your iPod Shuffle is now reset.
- If you're using the iPod Shuffle 2G or 4G, slide the power switch to the "On" position instead of toggling the playlist button.
Advertisement
-
Plug your iPod into your computer. If you can't reset your iPod no matter what you do, you may need to restore it. Restoring your iPod will erase all of the data, like the music on it, but you can load an old backup so that you don't have to start over from scratch. [13] X Research source
-
Open iTunes. If your device does not appear in iTunes, even though it is plugged in, you may need to enable Recovery Mode. You will need to unplug your iPod from your computer to enter Recovery Mode. See this guide for detailed instructions . If your iPod is recognized by iTunes, continue to the next step. [14] X Research source
- If you have an iPod touch and can still access the screen, you can restore your iPod without iTunes. Open Settings > General > Reset > Erase All Content and Settings then enter your PIN and your iPod will restore to factory settings. Doing this will delete all the music on your iPod.
-
Make a backup. Select your iPod and find the "Back Up Now" button in the Backups section. This will allow you to back up your settings, apps, and pictures to your computer before you restore your iPod. If your iPod is not functioning, you may not be able to make a new backup before restoring. [15] X Research source
- Make sure to back up to your computer instead of iCloud, as an iCloud backup doesn't save everything.
-
Restore the iPod. With a backup safely made, you're ready to restore your iPod. Click the "Restore iPod" button to begin the restore process. You will be asked to confirm that you want to restore. [16] X Research source
- The restore process can range from several minutes to an hour, so make sure that you have enough time to wait for it to finish.
-
Reload your old backup. After the restore process is complete, you can start using your iPod as if it was new, or you can load an old backup file. This will restore all of your settings and apps. You can load an old backup after the restore process is complete and the "Welcome to your New iPod" window appears. Select "Restore from this backup", ensure that the correct backup has been selected, and click Continue.
Advertisement
Community Q&A
Search
-
QuestionWhat happens if the WiFi glitches and the reset does not work?Community AnswerThe iPod should halt the reset until WiFi returns, even if the device runs out of power.
-
QuestionWhat do I do if I reset my iPod and the Apple logo is still on the screen?Community AnswerReset it again wait at least 30 minutes; it should go back to normal.
-
QuestionAfter restoring, if I reload my backup, will the account be restored again?Community AnswerIt will not restore again. You can get your data back safely, nonetheless.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Always keep back-ups of all your music. That way you can just restore your iPod when something goes haywire, and it you can put it all back on there.Thanks
- If you plug in your iPod and it says "iPod is corrupt, you may need to restore it", do not restore it . Unplug it and try to reset it. Restoring it will wipe your iPod, and you won't have a chance to back-up the files.Thanks
- Make sure the iPod is frozen. Normally if an iPod isn't starting up, it's just out of power. Plug it in to charge. If it freezes while you use it, or when you remove it or plug it in to a computer, then you have a freeze.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://support.apple.com/guide/ipod-touch/force-restart-ipod-touch-iphcb2aa6139/ios
- ↑ https://support.apple.com/guide/ipod-touch/force-restart-ipod-touch-iphcb2aa6139/ios
- ↑ https://support.apple.com/guide/ipod-touch/force-restart-ipod-touch-iphcb2aa6139/ios
- ↑ https://support.apple.com/guide/ipod-touch/return-ipod-touch-settings-to-their-defaults-iphea1c2fe48/ios
- ↑ https://support.apple.com/en-us/103823
- ↑ https://support.apple.com/en-us/102293
- ↑ https://support.apple.com/en-us/102293
- ↑ https://support.apple.com/guide/ipod-touch/return-ipod-touch-settings-to-their-defaults-iphea1c2fe48/ios
- ↑ https://support.apple.com/en-us/102293
- ↑ https://support.apple.com/en-us/HT204307
- ↑ https://support.apple.com/en-us/102062
- ↑ https://support.apple.com/en-us/102062
- ↑ https://support.apple.com/en-ph/guide/itunes/itnsdb1fe305/windows
- ↑ https://support.apple.com/en-ph/guide/itunes/itnsdb1fe305/windows
- ↑ https://support.apple.com/en-us/118107
- ↑ https://support.apple.com/en-ph/guide/itunes/itnsdb1fe305/windows
About This Article
Thanks to all authors for creating a page that has been read 674,816 times.
Advertisement