How to Shear a Sheep

PDF download Download Article
PDF download Download Article

Shearing is necessary for the health and happiness of your sheep, and even though it's a dirty, sweaty, tiring job, it is also extremely rewarding. It's important to know what you're doing while shearing, otherwise, you could stress or injure the sheep, or destroy the wool. Start with Step 1 below to find out the hows and whys behind shearing sheep.

Part 1
Part 1 of 3:

Preparation and Planning

PDF download Download Article
  1. Shearing is done for two main reasons: to collect sheep's wool for sale, but more importantly to relieve the sheep of heavy wool which may cause them to overheat in summer. In some parts of the world, sheep shearing is even considered a sport!
    • If the sheep are not sheared, they will become uncomfortable and possibly unhealthy, due to the dirt that can become matted up in their wool. Therefore, even if you do not plan on selling the wool for profit, your sheep will still need to be sheared at least once a year.
    • Due to its warmth and the ease with which it can be spun into yarn, wool from certain breeds of sheep is a valuable commodity. These animals are often raised differently and fed a special mineral-rich diet to improve the quality of their wool. A single sheep can produce 8 to 10 pounds of wool.
  2. Most sheep only need to be sheared once a year, although some breeds with faster-growing wool will need to be sheared twice. The best time of the year to shear your sheep is in early spring before the lambing season starts and the hot summer weather sets in. [1]
    • Shearing ewes before the lambing season is a good idea for many reasons. It will help to keep them cleaner while giving birth and make it easier for the lambs to find their mother's teats for feeding. If the animals are kept in a barn during lambing season, the sheared sheep will also take up less space.
    • Another reason shearing before the lambing season is a good idea is that sheared ewes will often eat more grass to produce more body heat. This provides them with the extra nutrition they need before giving birth.
    • Try to shear the sheep about a month before they give birth to the lambs. This will give them time to get over the stress of shearing. If you own a breed of sheep with fast-growing wool (such as Cotswolds, Icelandics, and Lincolns) aim to do the shearing in late summer or early autumn. Sheep will need at least six weeks to grow their wool before the winter weather sets in.
    Advertisement
  3. Although it may not seem like it, shearing a sheep is very hard work. It requires confidence, skill, and strength. Therefore, it might be a good idea to call in a professional shearer to perform (or at least help out with) the shearing. [2]
    • An inexperienced shearer can cause injury to the sheep or himself. It can also stress the animal, therefore affecting its health. In addition, an unskillfully sheared sheep can cause damage to the wool, thereby making it less valuable for selling.
    • In certain areas, professional sheep shearers can be booked out months in advance, so it's a good idea to call well ahead of shearing time. Other options include bringing the sheep from several smaller farms to a central location to be sheared. Here a hired shearing crew can shear all the sheep and process the wool simultaneously.
    • If you're adamant about shearing the sheep yourself, you can learn the proper skills by attending a sheep shearing school. Many sheep-farming states hold annual shearing classes that are open for any shepherds to attend.
  4. It's very important to have good quality shearing equipment. This will make the whole process much easier and is safer for both the shearer and the sheep. These days, electric cutters are used almost exclusively. [3]
    • Electric shears have three main parts - the handpiece, the comb, and the cutters. Look for shears with a higher number of teeth on the comb, as these tend to cut closer to the skin. You can expect to pay $250 to $500 for good-quality electric shears.
    • It's important to ensure that your cutters are still sharp before you begin shearing. Dull cutters will be more difficult to use and could be dangerous for both you and the sheep. Luckily, it is very easy to just replace the cutters on your shears. New cutters will cost between $10 and $15.
    • In years gone by (and in places with limited access to electricity) shearing was done using hand shears. This method of shearing is much more time-consuming and leaves more wool on the sheep.
  5. Before shearing, the sheep should be rounded up and gathered into a pen. If possible, separate the sheep into groups, keeping any lambs, yearlings, ewes and rams separate from each other. You could also separate the sheep according to breed or grade. [4]
    • Don't allow the sheep to get wet. Make sure that the sheep are not exposed to rain before shearing, as wet sheep cannot be sheared. This is because the shearer or the sheep could receive an electric shock (from the shears) and wet wool cannot be rolled up and sold.
    • Fast the sheep for a day before shearing. Sheep should not be given any food for the day before shearing. This will reduce the amount of waste they produce and help to keep the shearing floor clean. It will also minimize their discomfort when rolled on their backs for shearing.
    6. Advertisement
Part 2
Part 2 of 3:

Shearing the Sheep

PDF download Download Article
  1. The first step in shearing a sheep is to get it in the correct position. There are five main positions you will need to use throughout the shearing process. [5]
    • The first involves gently tipping the sheep over onto her back, then propping her shoulders between your knees for support. Her belly should be exposed and her four legs should be in the air.
    • Keep in mind that the more comfortable your sheep is during shearing, the less she will struggle - making your job easier as a result.
  2. The wool on the sheep's belly is normally the dirtiest and is not valuable for selling. This is why it is a good place to start. [6]
    • Using long, confident blows (this is the correct term for shearing strokes), shear the wool from the top of the brisket (breast bone) all the way down to the open flank area.
    • Make your first blow on the right-hand side, your second on the left, then shear off the wool in between. Make sure the first and second bellies are set wide enough apart. This will make the rest of your job easier down the line.
  3. The next step is to the wool from the inside of the hind legs and the crotch. To do this: [7]
    • Lean further forward (still holding the sheep firmly between the knees) and bring the shears up along the inside of the right leg.
    • Then bring the shears across to remove the wool along the crotch. This blow may need to be repeated to ensure all the wool is removed. Now run the shears down the inside of the right leg.
    • The most important thing to be aware of here is the ewe's teats. It's advisable to cover the teats with your left (or non-dominant) hand to prevent yourself from accidentally shaving them off.
  4. Turn approximately 90 degrees so that your right knee is in front of the brisket and the sheep's right foreleg is in between your legs and her left side is exposed. [8]
    • First shear the wool from the sheep's left hind leg, starting at the toe and working your way up towards the hind quarters, finishing on the near side of the backbone.
    • Shift your right leg a few inches backward to gain better access to the sheep's tail. Position the comb of the shears so it will enter the wool at the top of the tail. Make a blow from the top of the tail upwards along the backbone. Repeat once or twice to clear all the wool from the tail.
    • Since you have easy access to the sheep's head in this position, you can take this opportunity to shear the topknot of fleece from the sheep's head, if necessary. [9]
  5. Before you continue, you will need to move into the third position. To get in position: [10]
    • Place your right foot in between the sheep's hind legs and your left foot at the base of her spine, holding her body firmly between your knees. Use your left hand to grab the sheep below the chin and stretch her head backward.
    • Bring your clippers from the brisket towards the neck, ending your blow just below her chin. This is one of the most satisfying parts of the process, as it feels like you are "unzipping" her fleece.
    • Continue to make long parallel blows along the left side of her neck, ending first beneath her eye and then beneath her ear. Use your left hand to hold her ear back so you don't nick it.
  6. Shift your weight and maneuver the sheep slightly, so you have better access to her left shoulder.
    • As the skin on the shoulders can be quite wrinkled, use your left hand to pull the skin taut. This will make your blows a lot smoother and help you to avoid nicking or cutting the sheep.
    • Starting from her left knee, shear upwards towards her left shoulder, using one or two blows to clear the wool. You should also use this as an opportunity to clear the wool from the inside of her left foreleg.
  7. Move into the fourth position by sliding the sheep down along your shin until she's lying on her right side. Keep your right foot between her hind legs and your left foot under her shoulder.
    • Now it's time for the long blows, which extend all the way along the sheep's back. Position the shears at her tail and make a long straight blow all the way to her head, staying parallel to her spine.
    • Continue making these blows along the back until you've gone one blow past the backbone and her entire left side is cleared of wool.
  8. Now it's time to move into the fifth and final position. Swing your right leg around so you're standing upright with the sheep's nose between your knees.
    • Shear along the right side of the sheep's head, neck, and shoulders, using three or four separate blows. Remember to use your left hand to hold the wrinkly skin around the shoulder taut.
    • Once the neck and shoulder are cleared of wool, shear the wool from her right foreleg, from the shoulder to the toe.
    • Next, make a series of diagonal blows along the sheep's flank to clear the wool from this side. Use your left hand to put pressure on the sheep's right shoulder joint to keep her steady.
  9. The last step is to shear the wool from the sheep's right leg and hindquarters.
    • Shift your right foot forward slightly so you can reach and place your left hand on the sheep's right flank, applying firm pressure. This forces the sheep to keep her leg straight (making it easier to shear) while also stretching the skin.
    • Shear in a curved motion from the sheep's flank to her right hind leg. When the leg is cleared, make the final few blows to clear the last of the wool from the sheep's hindquarters. Congratulations - you've sheared your first sheep!
  10. Once the sheep have been sheared, you will need to skirt and roll the fleece (if you plan on selling the wool).
    • Skirting means removing any dirty or "incidental" wool which is not valuable and therefore not used for selling. To skirt the wool, place the fleece flesh-side down on a flat table or other surface. Spread it all out til it forms a single layer.
    • Remove any dirty or contaminated wool from the outside edges of the fleece - this includes any off-color wool, tags, or matted wool. These bits are mostly found on the wool that was on the belly, legs, and rear end of the sheep.
    • Once the contaminated wool has been removed, you can roll the fleece. The best way to do this is to fold the long sides of the fleece towards the center, then roll the fleece from one end to the other, so the flesh side is facing outwards.
    • This creates a neat package that can be easily transported for sale. Do not tie the rolled fleece, as this can lessen the value of the wool.
    11. Advertisement
Part 3
Part 3 of 3:

Shearing Like a Pro

PDF download Download Article
  1. One of the most important aspects of becoming a good shearer is to be confident with your blows.
    • Try not to second guess yourself or fumble with the shears, this will only increase your chances of making a mistake.
    • Try to develop a rhythm as you shear, this will help you to move easily from one section to another.
  2. Sometimes when a blow is performed incorrectly, you will need to make a second pass with the shears to remove the remaining wool. The small bits of fleece that result from this second pass are known as second cuts.
    • Second cuts are undesirable as they cannot be included in the rolled fleece. This is because they make yarn weaker and cause it to pill more easily.
    • The more experience you have, the less likely you are to produce second cuts. Being confident with your blows will help you to avoid them.
  3. The shears will move more easily and get a closer cut when the sheep's skin is pulled taut.
    • Therefore, it is important to constantly use your left (or non-dominant) hand to stretch the skin you are about to shear.
    • This is particularly important for sheep with finer wool, as their skin is more wrinkled and harder to see through the excess wool.
  4. Being familiar with your sheep will make a world of difference when it comes to shearing.
    • Knowing whether she's fat or skinny will help you to navigate her body shape and move the shears at the right angle over her hips, shoulder, and spine.
    • Knowing how many teats she has (some sheep have two, others have four) will help you to avoid them while shearing, and prevent you from accidentally shaving any off.
    • Being familiar with the overall health of your sheep is also useful. Healthy sheep produce plenty of lanolin (a wax-like substance produced in the sebaceous glands) which melts and lubricates the clippers on the shears, helping the wool to come away more easily. The lanolin on unhealthy sheep tends to stay thick, clogging up the clippers.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Does shearing hurt the sheep
    Karin
    Top Answerer
    No. The only time shearing will hurt the sheep is if the operator is rough, careless, or very inexperienced, and if the sheep is not restrained properly, allowing it to struggle through the process. Otherwise, shearing is very good for the sheep because it gets that heavy coat of wool off and makes the animal more comfortable in the summer heat. Experienced shearers are really good at quickly shearing sheep without hurting the animal at all.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 32
  • Question
    Do I shear so that the coat comes off as one or just in pieces?
    Karin
    Top Answerer
    The shearing should be done so that the coat comes off in one piece. This makes handling much easier and less cumbersome compared with shearing it in pieces.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 8
  • Question
    What do I do if the sheep struggles?
    Community Answer
    Relax and stop shearing for a moment. Still keep control of the sheep, placed on her butt and still held with your knees. Pulling on her legs can cause her to struggle more. Sometimes folding her head down a little can also help calm her down. Speak gently and calmly.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 6
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Make sure the clippers are well-oiled or they will get extremely hot and burn the sheep. Have lots of clipper oil on hand.
        Thanks
        Helpful 0 Not Helpful 0
      • Never avoid shearing because of a shy sheep; lure the sheep with food and feed the sheep after the shearing too.
        Thanks
        Helpful 0 Not Helpful 0
      • Crutching is a limited form of shearing that only removes wool from the sheep's rear end.
        • It is usually done to keep ewes clean during birthing, especially when lambing season occurs during the winter when the wool is particularly long.
        • However, sometimes male sheep are also crutched to keep the wool from becoming matted with feces.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      • Sheep.
      • Sheep shears.
      • Clipper oil.
      • Pen for holding the sheep.
      • Access to electricity.

      You Might Also Like

      How to
      Care for a Donkey
      How to
      Humanely Euthanize a Backyard Chicken
      What to Feed Local Deer (and When You Should Do It)
      How to
      Age a Deer
      How to
      Ride a Camel
      How to
      Build a Pole Barn
      How to
      Tell a Fawn's Age
      How to
      Care for Sheep
      How to
      Use an Incubator to Hatch Eggs
      How to
      Buy a Camel
      How to
      Make Homemade Deer Food
      How to
      Defend Against a Ram
      How to
      Extract Lanolin from Sheep's Wool
      How to
      Lay Out a Pole Barn
      Advertisement

      References

      1. ↑ https://onpasture.com/2016/03/28/how-to-shear-a-sheep/
      2. ↑ http://www.sheep101.info/201/shearing.html
      3. ↑ https://iamcountryside.com/sheep/how-to-shear-a-sheep/
      4. ↑ http://www.sheep101.info/201/shearing.html
      5. ↑ https://extension.psu.edu/sheep-shearing
      6. ↑ https://worksafe.govt.nz/topic-and-industry/working-with-animals/working-with-sheep/safe-sheep-shearing-fs/
      7. ↑ https://worksafe.govt.nz/topic-and-industry/working-with-animals/working-with-sheep/safe-sheep-shearing-fs/
      8. ↑ https://onpasture.com/2016/03/28/how-to-shear-a-sheep/
      9. ↑ http://www.premier1supplies.com/img/instruction/41.pdf
      1. ↑ https://onpasture.com/2016/03/28/how-to-shear-a-sheep/

      About This Article

      Article Summary X

      To shear a sheep, start by turning it over onto its back so its shoulders rest against your knees. Next, shear the wool on the belly starting from the top of the breast bone. Then, move to the side of the sheep to shear the hind left leg and tail before moving behind the sheep to shear the chest and neck. When you're done, slide the sheep onto its right side and cut the wool from its back. Finally, swing your right leg around so the sheep's nose is between your knees and shear its right side. For tips on how to herd sheep, and how to skirt and roll a fleece, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 205,570 times.

      Reader Success Stories

      • Daniel Crawgay

        Nov 30, 2016

        "I am Welsh so you know just how much I like sheep. This article has helped me to further understand the range of ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement