PDF download Download Article PDF download Download Article

Glass jars allow you to cleanly store dry, wet or non-perishable goods in a cool, dry place. The water bath method for preserving foodstuff in glass jars is probably the most common way to seal Mason jars. However you can purchase the vacuum sealing attachments or use the aesthetically pleasing wax sealing method for craft projects in glass. Sealed glass jars keep goods unspoiled for up to a year.

Method 1
Method 1 of 3:

Sealing with a Water Bath

PDF download Download Article
  1. Before you can begin the process of sealing jars with a water bath, take some time to prepare the jars. First, inspect the jars and lids for nicks, cracks, or sharp and uneven edges. Check both the inner and outer layer of a jar's lid. Make sure the bends fit on all the jars. Defective jars should be thrown out. [1] Once you've made sure all the jars are safe for use, hand wash your jars and lids in soapy warm water. After washing them thoroughly, set them to dry in a drying rack or on a clean dish towel. [2]
  2. Place your jars in a large pot filled with water. The water should be hot but not boiling to start. The pot should be large enough so that the water completely covers the jars. Bring the water to a simmer. Keep the jars there until ready for use. [3]
    • If you frequently need to seal glass jars with a water bath, consider purchasing a bath canner. This is a special device specifically designed to submerge jars in water for sterilization. However, this tool is mostly for convenience. If you do not have a bath canner, a large pot will work just as well. [4]
    Advertisement
  3. When using the water bath sealing method, make sure your foodstuff is naturally acidic or has added acid. This is the only way to guarantee that bacteria will not build up in your canned goods. While you're letting the jars sterilize, prepare your canning recipe. [5]
    • High-acid foods include fruits, fruit juices, jams, jellies and other fruit spreads, salsas, tomatoes with added acid, pickles, relishes, chutneys, sauces, vinegars and condiments.
  4. First, turn off the heat on the pot and remove your now sterilized jars from the pot with tongs. You can also buy specialized devices designed to remove jars from hot water, called a jar lifter. This may be slightly safer than tongs. [6] Place the jars to dry in a drying rack or on a clean dish towel. Then bring the large pot to a low boil. [7]
  5. Set the boiling water aside and fill your jars. For the best effects, use a tool known as a jar funnel which allows you to easily transfer liquid-like substances into your jars.
    • Make sure to leave some air space. For soft spreads, like jams and jellies, leave 1/4 of an inch. For solid foods, like fruits and pickles, leave 1/2 of an inch. [8] Place the lid on the jar and screw the ring on. [9]
    • Tap the side of the jar with a wooden spoon to remove bubbles.
    • Repeat with the other jars.
    • Don’t screw the ring on too tightly or the excess air won’t be able to escape.
  6. The canning rack is a device that sits on the water bath canner or pot and ensures the glass jars don’t touch the bottom and break. Make sure you have a canning rack before beginning the sealing process. Never layer the jars on the rack. You may have to seal the jars in several batches depending on the size of your canning rack.
  7. Place the canning rack with the jars into the boiling water. Process them according to recipe directions. The processing (boiling) times will vary from recipe to recipe.
    • Processing time starts when the pot comes back to a boil.
    • Make sure there's about an inch or two of water above the lids of the jars. Add more water before returning it to a boil if necessary.
  8. Remove the rack with the jars and set them on your counter to cool overnight. Wear oven mitts when moving the rack to avoid injury. Use a pair of tongs or jar lifters to lift them carefully out of the rack. [10]
  9. If the lid is not depressed, it is not sealed. You should eat it immediately instead of storing it or re-seal the jar with a new lid. Check the jar for cracks before doing so. [11]
  10. Advertisement
Method 2
Method 2 of 3:

Sealing with a Vacuum Pack

PDF download Download Article
  1. You'll need a vacuum pack machine. You'll also need a glass jar sealing attachment for your vacuum sealer. This is a special type of device that fits over glass jars, like mason jars, and allows you to vacuum seal your jars.
  2. It's a good idea to sterilize any jars you're using as a precaution. You can boil them or run them through a very hot dishwasher. If you're boiling them, put them in a pot with water that completely covers the jars. Bring the pot to a boil. Reduce heat to a simmer and let them stay there until you're ready to use them. [12]
  3. While waiting for the jars to sterilize, prepare the food you're going to can. This may mean following a recipe for a jam or a jelly. [13] However, many people store easily breakable items that cannot be stored in bags in vacuum-sealed jars. For example, you may want to store something like small candies or nuts in a vacuum-sealed jar. [14]
    • When you're done preparing the food, you can remove the jars from the boiling water. Use either tongs or a jar lifters. Allow them to dry and then add the food.
    • Once again, leave some airspace. With soft spreads, like jams or jellies, leave 1/4 an inch of airspace. Whole foods, like nuts or candies, need 1/2 an inch of airspace. [15]
    • Use a non-metallic spoon to remove bubbles. Do so by running the wooden or rubber spoon around the inner surface of the jar, pressing the food down gently.
  4. Once your food is prepared, you can begin to prepare the vacuum. Place the lid on the jar you're going to seal. However, leave the lid ring off for now. Attach the hose of the vacuum pack sealer to the jar sealer attachment. From there, place the attachment over the jar. Make sure the attachment is on firm so it does not fall of when you begin vacuuming the jar. [16]
  5. You should process the jar according to your specific device instructions. However, in most cases you simply turn the device on until the machine indicates the jar is sealed. You should hear the lid pop when it is ready. The machine may also indicate, through a sign like a green light, that the process is complete. [17]
  6. Remove the hose from the sealing attachment. Remove the sealing attachment from the jar. Then screw the ring tightly onto the jar. Store the jar in a cool, dry place. [18]
  7. Advertisement
Method 3
Method 3 of 3:

Sealing with Wax

PDF download Download Article
  1. To seal your jars with wax, you'll need a ceramic wax sealer dish, filament tape, scissors, a tea candle, a kitchen lighter, and bottle sealing wax. You should be able to find a lot of these supplies at a local craft store or department store. However, if you can't find them in your area you should be able to order them online. This process is best for glass jars and bottles with slim necks. [19]
  2. If you've purchased a wax sealer dish with a place for the candle beneath it, you can just place the sealer on the table. If not, you'll need to put it on a small rack so that a candle can go beneath it.
  3. Light a tea candle. Then, place it beneath the wax heating dish.
  4. Add granular wax in any color to the ceramic dish. As the wax melts, add more wax to the dish until the liquefied wax is about 2cm from the top of the dish.
    • The wax will take about 20 minutes to melt. Blow out the candle when it's finished.
  5. Twist the cap on the bottle. Make sure the cap is on tight. If it isn’t used for eating, you can use a cork instead.
  6. Wrap the filament tape around the cork or the cap where it meets the jar until it overlaps on itself. Cut the filament tape. Bend the end that's sticking out and push it against the rest of the tape. The bent part will be what is pulled to undo the seal.
  7. Turn the jar upside down. Dip it straight down into the wax. Lift it straight up a moment later. Spin it as soon as you remove it from the wax to prevent unwanted dripping.
  8. This step is optional. Press your engraved wax seal into the top immediately after dipping. A monogrammed or symbolic wax seal is a great way to personalize your project. Allow it to sit and dry completely before transporting. [20]
  9. Advertisement

Community Q&A

Search
Add New Question
  • Question
    If I didn't get my lids sealed, can I just boil them again?
    Community Answer
    No, you can't. They can only be used once. You'll have to re-can them, sadly, for them to be safe.
  • Question
    When sealing with a water bath, do I tighten the ring after removing the jars from the simmering water in step 8?
    Community Answer
    There is no need for this, because the seal material inside the lid during heating becomes soft and blocks every passage of air.
  • Question
    Can I seal my jars filled with raspberry jelly in the microwave?
    Community Answer
    No. The lids are not microwave safe, and the glass could overheat.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Things You'll Need

      Sealing with a Water Bath

      • Large pot
      • Dishwasher
      • Soap
      • Water
      • Glass jars
      • New lids
      • Funnel
      • Kitchen tongs
      • Wooden spoon
      • Dish towel
      • Drying rack
      • Canning rack

      Sealing with a Vacuum Pack

      • Vacuum sealer
      • Jar sealing attachment
      • Glass jars
      • New lids
      • Dishwasher or large pot
      • Wooden spoon

      Sealing with Wax

      • Wax sealer dish
      • Granular wax
      • Jar with twist lid or cork
      • Tea candle
      • Kitchen lighter
      • Scissors
      • Filament tape
      • Glass jars

      About This Article

      Article Summary X

      To seal glass jars, start by filling sterilized jars with high-acid foods such as jam, pickles, or chutney, leaving 1/4 inch of space at the mouth of the jar. Next, screw on the lids and put the jars onto a canning rack. Then, lower the rack into a pot of boiling water and process them for as long as the recipe calls for. Finally, remove the jars from the pot using tongs or a jar lifter and allow them to cool overnight. If the lid isn’t depressed once it’s cooled, repeat the process so that it seals. To learn how to seal glass jars using wax, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 431,526 times.

      Reader Success Stories

      • Vanessa Bruzon

        Nov 5, 2018

        "I wanted to do some pumpkin jam with the leftovers from Halloween, and didn't know how to seal a jar. This was ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement