Download Article
Download Article
Impact sprinkler heads sit on a rotating bearing, which allows them to pivot as water flows through them for full 360 degree coverage. If you want to tweak your impact sprinkler system to change the pressure , spray pattern, or arc of the water, there are several ways you can go about it. The simplest solution is to control the flow of water at its source. You can also adjust the different parts of the head , like the diffuser pin, movement collars, and deflector shield, to get just the right strength and trajectory.
Steps
-
Adjust the flow of water at the source. The simplest way to change the amount of water coming out of your impact sprinkler is to tighten (clockwise) or loosen (counterclockwise) the hose faucet where it’s hooked up. Opening the faucet to increase the water flow will increase the power and coverage of the stream, while decreasing the flow will confine the sprinkler coverage to a smaller area.- Use a lower water flow when you want to avoid damaging delicate plants, like flowers and leafy shrubs, with a forceful blast.
-
Change the position of the diffuser pin. The diffuser pin is a large screw anchored to the base of the sprinkler head. If you want to decrease the distance that your sprinkler covers, screw the pin in a clockwise direction until it sits over the water nozzle. For a more concentrated stream that will go further, unscrew the pin all the way or remove it entirely. [1] X Research source- When inserted, the diffuser pin breaks up the stream, causing it to fan out in a delicate spray or mist. [2] X Research source
- The further the pin projects over the opening, the shorter and wider the spray will be.
Advertisement -
Raise or lower the deflector shield. Swivel the flat metal square attached to the body of the sprayer head (just beside the diffuser pin) up or down. When the stream hits the downturned deflector shield, it will be redirected into a lower arc perfect for watering nearby plants and patches of grass.- If you’re trying to water from one end of your lawn or garden to the other, keep the deflector shield up. This will allow the stream to travel in a higher arc and cover longer distances.
-
Use the friction collars to alter the spray pattern. Twist the metal clamps that wind around the base of the sprinkler head into different positions to determine the movement of the sprinkler head. The closer together the collars are, the narrower the watering range. [3] X Research source- As the sprinkler turns, the wiry metal piece at the base of the head, known as the trip pin, will run up against the collar clamps, causing the sprinkler to reverse direction.
- Make sure the trip pin stays within the range you want to set for the sprinkler. That way you can water the rose bushes outside your home without dousing the front porch or the garage door.
-
Flip up the trip pin for full 360 degree coverage. If you want the sprinkler to rotate all the way around, simply lift the trip pin until it rests up against the sprinkler head. It will then be able to send out water in a smooth, radial motion.- Getting the trip pin out of the way can be helpful if your sprinkler system is located in the center of the area you’re watering.
-
Adjust the distance control dial. Some impact sprinkler models feature a separate dial that allows users to manually set the desired spray distance. If your sprinkler has one of these dials, turning it to the left will reduce the force of the stream, while turning it the right will pressurize it to send it further. [4] X Research source- The approximate distances should be clearly labeled in feet or meters, making it easy to get just the right coverage.
- Assuming your impact sprinkler doesn’t have a distance control dial, you’ll get the best custom spray by tinkering with the water pressure, diffuser pin, and deflector shield.
Advertisement
-
Make sure you're using a water source with a pressure of at least 15 psi. Lower water pressures won’t have the force needed to make an impact sprinkler system effective. If your sprinklers are falling short or don’t seem to be putting out water at a very high rate, you may be better off with a different method of irrigation . [5] X Research source- You can find out how many psi’s you’re working with by calling your local water provider or using a pressure gauge that fits over the end of a standard garden hose.
- Most residential areas have an average water pressure somewhere between 40-60 psi. However, yours might be lower if you get your water from a pump or well. [6] X Research source
-
Choose the right sprinkler head. Impact sprinkler heads are usually sold in a couple different materials—plastic and metal. Plastic heads are lightweight, making them easier to turn with a conservative water flow of around 20-40 psi. While they tend to be slightly more expensive, metal heads will be better able to handle the strain of higher pressures.- Metal sprinkler heads are also more durable, meaning they’ll last longer and experience fewer issues. [7] X Research source
- If you’re unsure which type of head will work best for your home, consult with a home improvement or gardening expert while you’re shopping for an impact sprinkler system.
-
Clean your sprinkler periodically. A new sprinkler that has stopped performing to its usual standard may just be in need of a good cleaning. Remove the sprinkler head from the base and disassemble it to gain access to the nozzle and swivel bearing. Gently scrub each piece with hot water and a bottle brush to remove any debris or mineral buildup that may be inhibiting the sprinkler’s movement. [8] X Research source- Common symptoms of a dirty sprinkler include a weak stream with normal water pressure, turning to one side and stopping, and failing to rotate at all.
- A mixture of vinegar and warm water can cut through heavy mineral and sediment deposits that have accumulated inside the sprinkler head.
Advertisement
Expert Q&A
Search
-
QuestionAre there any other methods to adjust an impact sprinkler?Gus Briones is a Landscaping Specialist based in Lake Elsinore, California. Gus has over 25 years of industry experience working on renovations and new builds for clients. He specializes in landscaping, landscape maintenance, and landscape construction.It would depend on the type of impact sprinkler that you have, but usually, they come with a key. You insert that key into the sprinkler, then adjust the arc and the amount of water the sprinkler throws out. Again, it would depend on the manufacturer and the exact model that you have, so consult your owner's manual, or you can search the internet through the manufacturer's website to find a link or a video with actual steps.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Once you get your impact sprinkler head set up the way you want it, take a picture or write down the individual settings so you’ll remember where they need to be to water each section of your property.Thanks
- The back-and-forth motion of an impact sprinkler typically results in more even coverage over large areas. This can be a major plus if you want to bring down your utility bill or you’re trying to keep plants alive in a hot, dry climate.Thanks
- Replacing damaged or displaced parts as soon as you discover them to keep your sprinklers working effectively.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Manual water pressure gauge
- Bottle brush
- Distilled white vinegar
Expert Interview
Thanks for reading our article! If you’d like to learn more about home care, check out our in-depth interview with Gus Briones .
References
- ↑ https://lawnlove.com/blog/how-to-adjust-sprinkler-heads/
- ↑ https://www.youtube.com/watch?v=PsZ9sg3Pwt0&feature=youtu.be&t=60
- ↑ https://www.youtube.com/watch?v=nKkhxSiUH3k&feature=youtu.be&t=18
- ↑ https://www.rainbird.com/documents/diy/impacttroubleshootingguide.pdf
- ↑ https://www.youtube.com/watch?v=PsZ9sg3Pwt0&feature=youtu.be&t=48
- ↑ https://www.plumbnation.co.uk/blog/the-complete-guide-to-water-pressure
- ↑ https://www.youtube.com/watch?v=PsZ9sg3Pwt0&feature=youtu.be&t=43
- ↑ https://www.rainbird.com/documents/diy/impacttroubleshootingguide.pdf
About This Article
Article Summary
X
To adjust the pressure, spray pattern, or arc of the water from an impact sprinkler, try controlling the water flow at the source or adjusting the different parts of the head. For example, loosen the hose faucet that it's hooked up to, which will increase the water flow. Alternatively, turning the faucet down will decrease the range of coverage. Another way to alter your sprinkler is to change the position of the diffuser pin, which is the large screw anchored to the base of the sprinkler head. If you want to limit the distance that your sprinkler covers, screw the pin in a clockwise direction until it sits over the water nozzle. You can also unscrew the pin all the way or remove it entirely for a more concentrated stream that will go further. To learn how to redirect the arc of your sprinkler, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 316,061 times.
Reader Success Stories
- "I received my new sprinkler two hours ago and when I opened it, behold: no instructions. I have tried it as received without fiddling with it and it worked, but I had no idea how to adjust it, so came indoors and Googled instructions. I chose yours first, and found they are spot on. Many thanks for superb instructions." ..." more
Advertisement
84%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I received my new sprinkler two hours ago and when I opened it, behold: no instructions. I have tried it as received without fiddling with it and it worked, but I had no idea how to adjust it, so came indoors and Googled instructions. I chose yours first, and found they are spot on. Many thanks for superb instructions."
..."
more
"I never used an impact sprinkler and my new one didn't come with instructions. I didn't know what the parts were, or how, when and why to adjust them. This article broke everything down for me perfectly! Much better than the couple videos I started with."
..."
more
"Before l found these instructions, I didn't have a clue as to how to adjust my impact sprinkler. This article explained the steps clearly, and the illustrations brought it all into focus. I now have the perfect setup for watering my lawn and beds."
..."
more
"Your instructions are awesome and easy to follow. I also purchased an individual impact sprinkler with no instructions included. Reading your article and using the pictures, I was able to adjust and have the sprinkler working properly! Thank you!"
..."
more
"I was about to throw this sprinkler out and buy something very different. Finally found this wiki and now I like my impact sprinkler. (It would have been helpful if it came with instructions.)"
..."
more
