Download Article
Download Article
If you have a piece of aluminum you’d like to age, there are several methods of doing so. You can spray your aluminum with bleach and set it in the sun to create an aged look. Alternatively, you can wrap your aluminum in aluminum foil and run it through the dishwasher after adding powdered dishwashing detergent and trisodium phosphate to the dispenser. Or, you can soak you aluminum in cold water and oxygen-based cleaner to create aging and patterns. No matter the method, you’ll create a cool, distressed look to aluminum pieces that are perfect for decor and crafting.
Steps
-
Rough up the surface with sandpaper. If you want a truly distressed and aged look, but are working with shiny, new aluminum, you can sand it down. Use 80-grit sandpaper to rough up the surface of the metal. [1] X Research source
-
Spray your aluminum with bleach. Wear a mask and protective gloves when working with bleach. Do this in a well-ventilated area so fumes can easily disperse. Put regular bleach in a spray bottle and spray it onto the aluminum. [2] X Research sourceAdvertisement
-
Let the aluminum sit in the sun for a few hours. Set the aluminum outside in the sun for several hours. The sun speeds up the process and helps the bleach distress the metal. Soon, the chemical reaction will create an aged look on your aluminum. [3] X Research source
-
Rinse off the bleach. Use running water to rinse the bleach off the aluminum, or soak the aluminum in a container of water for a few minutes. If your aluminum piece has electronic parts or other things that would prevent you from rinsing or submerging it in water, use a clean, white cloth to wipe the bleach off the surface of the aluminum.
Advertisement
-
Wrap your aluminum piece in aluminum foil. Place your aluminum piece on a sheet of aluminum foil with the shiny side facing away from the aluminum piece. Fold the foil over so it covers the aluminum piece but is not sealed. The aluminum foil creates distortions as well as a rainbow pattern on the aluminum due to the heat and chemical reaction. [4] X Research source
-
Load your aluminum pieces in the dishwasher. Keep the open ends of the aluminum foil facing upwards so that the water can run down into the package. Stack your pieces in the dish rack of the washer. [5] X Research source
-
Fill the dispenser with powdered dishwashing detergent and TSP. Add powdered dishwashing detergent, like Cascade Complete or Finish Dishwasher Powder, to the dispenser. Then, add 1 teaspoon of trisodium phosphate (TSP) to the dispenser. [6] X Research source
- TSP can be found at your local hardware or home improvement store.
-
Run the pots and pans cycle. Age the aluminum by running the dishwasher on the pots and pans cycle. Turn on the drying cycle as well. [7] X Research source
-
Remove the pieces from the dishwasher. After the cycle is complete, carefully remove the aluminum pieces from the dishwasher. Use caution, as they may be hot. Remove the foil around the aluminum. [8] X Research source
-
Repeat the process to add more patina. If you want to add more patina or increase the aged look of the aluminum, wrap the pieces in aluminum foil at a different orientation and run them through the dishwashing cycle again. [9] X Research source
Advertisement
-
Sprinkle oxygen-based cleaner in the bottom of a container. Choose a container large enough for your aluminum pieces to fit inside and be completely submerged. Sprinkle a few tablespoons of an oxygen-based cleaner (like Oxi-Clean, Clorox Oxygen Action, All Oxi-Active, or Shout Oxy Powder) in the bottom of the container. [10] X Research source
- You can make your own oxygen cleaner by combining 1 part sodium percarbonate (dry, powdered hydrogen peroxide) and 1 part sodium carbonate (washing soda or soda ash). [11] X Research source
- Take care not to confuse either of those powders with sodium bicarbonate (baking soda).
-
Place crumpled aluminum foil in the container to create patterns. If you’d like your aluminum to have patterns in the aging, you can create them with aluminum foil. Crumple up several pieces of aluminum foil and place them in the bottom of the container, on top of the oxygen-based cleaner. Press them flat into the bottom of the container. [12] X Research source
- Add a few more tablespoons of oxygen-based cleaner on top of the aluminum foil. [13] X Research source
-
Lay your aluminum pieces on top of the aluminum foil. You can put templates, gears, or other items on top of the aluminum that will prevent the covered sections from being aged, if you’d like to make designs or shapes on your aluminum. [14] X Research source
-
Sprinkle more oxygen-based cleaner on top of the aluminum pieces. Several tablespoons should suffice. Spread the cleaner evenly over the metal and try to avoid building up piles of the powder on top of the aluminum. [15] X Research source
-
Place something heavy on top of the aluminum. In order to keep your aluminum pieces from floating in the water, place a heavy object on top of them. You can use another piece of metal like a weight or a gear, or even a wrapped stack of dinner plates. [16] X Research source
-
Pour cold water in the container. Pour cold water in the container until the entire piece of aluminum is submerged. Add up to ½ inch (1.3 cm) of water over the top of the aluminum to ensure it is completely covered. [17] X Research source
-
Tip the container gently to get the cleaner to flow. Carefully tip your container a little bit to one side and then the other in order to get the oxygen-based cleaner to flow. If the container is too heavy for you to move, gently agitate the mixture with a long spoon. [18] X Research source
-
Add another few tablespoons of oxygen-based cleaner to the water. Swirl the mixture to get the powder to flow through the water. The oxygen bubbles produced by the cleaner are what cause the oxidation of the aluminum and make it change colors. [19] X Research source
-
Allow the aluminum to soak for at least 24 hours. Though you may begin to notice the aluminum changing color after four hours, for best results you should leave the aluminum to soak for at least 24 hours. You can leave it for up to two days if you desire a deeper color change. [20] X Research source
-
Remove the aluminum from the water. Take the aluminum piece out of the water. Use a razor blade or the edge of a plastic card (like a hotel room key or credit card) to remove any heavy crusts of oxygen-based cleaner left on the aluminum.
-
Rinse the aluminum with water and vinegar. Mix 1 tablespoon (14.8 ml) of distilled white vinegar with each cup of water. Pour the mixture over the aluminum or soak the aluminum in the mixture for a few minutes. Then rinse the aluminum with plain water. [21] X Research source
-
Allow the aluminum to dry. Set the aluminum in a dish drainer to dry, if the piece is small enough, or prop it against a hard surface to dry if the piece is large. This aging process creates flowing gray tones in the aluminum. [22] X Research source
Advertisement
Expert Q&A
Search
-
QuestionAre there any other ways to age aluminum?Surekha Krishnan is a Metallurgy Expert based in Columbia, South Carolina. Surekha specializes in both arc welding and solid-state welding and has been a Plant Metallurgist at FN America, LLC since 2021. Surekha has over 7 years of experience, is an expert in all heat treat processes and record retention, has prior experience as a Weld Engineer, and has taught various IIW welding courses in the past.You can also age aluminum by heating it in a controlled environment at higher temperatures. For example, you can place aluminum in an oven at temperatures around 180°F for several hours, depending on its size, for a faster aging process.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You’ll Need
Bleaching Aluminum
- Spray bottle
- Bleach
Putting Aluminum in the Dishwasher
- Aluminum foil
- Powdered dishwashing detergent (like Cascade Complete or Finish Dishwashing Powder)
- Trisodium phosphate (TSP)
- Dishwasher with pots and pans and drying cycles
Using Cold Water and Oxygen Cleaner
- Container
- Aluminum foil
- Cold water
- Oxygen-based cleaner (like OxiClean or Shout Oxy Powder)
- Heavy item to anchor aluminum (like a weight or a wrapped stack of dinner plates)
- Distilled white vinegar
References
- ↑ https://thecavenderdiary.com/2013/04/28/aging-a-galvanized-metal-clock/
- ↑ https://thecavenderdiary.com/2013/04/28/aging-a-galvanized-metal-clock/
- ↑ https://thecavenderdiary.com/2013/04/28/aging-a-galvanized-metal-clock/
- ↑ https://www.youtube.com/watch?v=-CUM9QiKl2o&feature=youtu.be&t=51
- ↑ https://www.youtube.com/watch?v=-CUM9QiKl2o&feature=youtu.be&t=106
- ↑ https://www.youtube.com/watch?v=-CUM9QiKl2o&feature=youtu.be&t=24
- ↑ https://www.youtube.com/watch?v=-CUM9QiKl2o&feature=youtu.be&t=24
- ↑ https://www.youtube.com/watch?v=-CUM9QiKl2o&feature=youtu.be&t=222
- ↑ https://www.youtube.com/watch?v=-CUM9QiKl2o&feature=youtu.be&t=317
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=21
- ↑ https://wellnessmama.com/natural-home/homemade-oxyclean/
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=33
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=49
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=56
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=83
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=207
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=232
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=253
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=273
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=303
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=580
- ↑ https://www.youtube.com/watch?v=becvsopdhNg&feature=youtu.be&t=358
About This Article
Article Summary
X
Aging aluminum is a good way to give it a cool, distressed look. The easiest way to age aluminum is in the dishwasher. Just wrap your object in aluminum foil and run it on the pots and pans setting with powdered dishwashing detergent and a teaspoon of trisodium phosphate, also called TSP. Repeat the process if you want more patina. You can also age aluminum with bleach. Start by roughing up the surface with sandpaper to distress it. Then, spray the object with bleach and let it sit outside in the sun for a few hours, which will let the bleach dissolve some of the metal. Afterward, run the aluminum object under cool water to remove the bleach. To learn how to use oxygen cleaner to age aluminum, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 100,334 times.
Reader Success Stories
- "I'm building a model railroad and needed a load for a flatcar. I wanted a 'dirty, grimy' look and using these techniques I was able to make a very realistic load. It was fast, easy and cleaned up quickly. Thanks!" ..." more
Advertisement
83%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I'm building a model railroad and needed a load for a flatcar. I wanted a 'dirty, grimy' look and using these techniques I was able to make a very realistic load. It was fast, easy and cleaned up quickly. Thanks!"
..."
more
"I'm still researching, so I can't report success, but these instructions will help me avoid paying for commercially available products and processes unlikely to work as well as these recommendations."
..."
more
