How to Apply Clear Coat on Wood

Co-authored by Sarah Fogle and Amber Crain

Last Updated: July 3, 2022 References

Applying a clear finish to wood brings out the wood’s natural beauty, while sealing and protecting the wood’s surface. Oil-based polyurethane is an excellent product to use for this purpose. Start by sanding the surface thoroughly and wiping it down to remove any dust. Create a homemade sealer by thinning the polyurethane with mineral spirits and use this for your first coat. Follow up with 2 coats of undiluted polyurethane straight from the can. Sand the surface once more, then apply your final clear coat.

Part 1

Part 1 of 4:

Sanding and Cleaning the Surface

Download Article

{"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/4\/49\/Apply-Clear-Coat-on-Wood-Step-2.jpg\/v4-460px-Apply-Clear-Coat-on-Wood-Step-2.jpg","bigUrl":"\/images\/thumb\/4\/49\/Apply-Clear-Coat-on-Wood-Step-2.jpg\/aid9692919-v4-728px-Apply-Clear-Coat-on-Wood-Step-2.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/3.0\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}

1
Work in a clean room with good ventilation and lighting. In order to properly apply a clear coat to wood, you want to work in an environment with as little dust as possible. Good lighting, such as natural light or bright artificial light, will enable you watch out for streaks and bubbles in your work. ^{[1]
X
Research source}
- Good ventilation is crucial. Crack a window to let fresh air in.
- If you're working in a small space, you may want to prop an exhaust fan in the window. Face the fan out to pull vapors from the room and blow them outside. ^{[2]
  X
  Research source}
- Never work in a damp area, as this will mess with your finish. ^{[3]
  X
  Expert Source
  
  William & Shannon Latil
  Furniture Refinishing & Home Remodeling Specialists
  
  Expert Interview. 29 October 2021.}
2
Sand the surface with medium grit sandpaper. Use 80 or 100-grit sandpaper to lightly go over the entire surface of your project, taking care to get into the nooks and crannies. Use medium grit sandpaper to eliminate any major scratches, notches, or blemishes in the wood. ^{[4]
X
Research source}
- If you're working on a very large project, you may want to use an electric sander or sanding block to get the job done.
- You can use sanding sponges for corners and complex areas where a power sander cannot reach. ^{[5]
  X
  Research source} ^{[6]
  X
  Expert Source
  
  Sarah Fogle
  DIY Specialist
  
  Expert Interview. 10 August 2021.}
- Wear protective gear if you use power tools. ^{[7]
  X
  Research source} ^{[8]
  X
  Expert Source
  
  Sarah Fogle
  DIY Specialist
  
  Expert Interview. 10 August 2021.}
Advertisement
3
Follow up with fine and extra fine grit sandpaper. After smoothing out the larger blemishes with medium grit sandpaper, use fine 100-grit sandpaper to level and smooth the surface. Follow that up with an extra-fine 220-grit sandpaper to create the smoothest surface possible. ^{[9]
X
Research source} ^{[10]
X
Expert Source

Sarah Fogle
DIY Specialist

Expert Interview. 10 August 2021.}
- The smoother the surface, the better your clear coat will adhere and look.
Use a vacuum with a soft bristle attachment to get rid of all the dust on your project's surface. Vacuum the area around the project, as well. It's important that you rid the area of all dust generated by your sanding. Otherwise, that dust can end up trapped and visible beneath the clear coat. ^{[11]
X
Research source}
Use a lint-free cloth to ensure no traces of the cloth's material are left behind. Dampen the cloth with mineral spirits and wipe down the entire surface. Be sure to get into the nooks and crannies. Then go over the surface one final time with a dry tack cloth. ^{[12]
X
Research source}

Part 2

Part 2 of 4:

Sealing the Surface

Download Article

{"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/e\/e8\/Apply-Clear-Coat-on-Wood-Step-6.jpg\/v4-460px-Apply-Clear-Coat-on-Wood-Step-6.jpg","bigUrl":"\/images\/thumb\/e\/e8\/Apply-Clear-Coat-on-Wood-Step-6.jpg\/aid9692919-v4-728px-Apply-Clear-Coat-on-Wood-Step-6.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/3.0\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}

1
Use an oil-based polyurethane and a foam or natural bristle brush. Oil-based polyurethane in a satin sheen is an excellent all-purpose clear coat that is relatively easy to apply. Purchase this and your foam brush at a hardware or home improvement store. ^{[13]
X
Research source}
- Foam brushes are recommended because they are inexpensive, and you can toss them out when you’re done.
- Natural bristle brushes are also a great choice, although they are more expensive and not disposable.
2
Create sealer by combining 1 part mineral spirits and 2 parts polyurethane. You can create your own homemade sealer by thinning the polyurethane with paint thinner. Stir the polyurethane well, then combine it with the mineral spirits in a glass jar or plastic bucket. Stir gently with a wooden wand to combine the ingredients.
- Creating a homemade sealer is the easiest and most economical choice.
3
Brush on 1 coat of the sealer with long, even strokes. Dip your brush into the sealer to load it with product. Starting on 1 side of your project and working systematically to the other side, brush on the sealer with long, even strokes. ^{[14]
X
Research source}
- Watch for dripping. If you notice any drips, brush over them to smooth them out.
{"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/9\/9d\/Apply-Clear-Coat-on-Wood-Step-9.jpg\/v4-460px-Apply-Clear-Coat-on-Wood-Step-9.jpg","bigUrl":"\/images\/thumb\/9\/9d\/Apply-Clear-Coat-on-Wood-Step-9.jpg\/aid9692919-v4-728px-Apply-Clear-Coat-on-Wood-Step-9.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/3.0\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}

4
Wait for 5 minutes and examine the surface once more for dripping. Because the sealer is pretty thin, dripping can be a problem. You definitely don't want any drips to dry on the surface, since this will disturb your smooth finish. Give the coat of sealer about 5 minutes to dry, then examine the surface once more for drips. Smooth out any that you see with your brush. ^{[15]
X
Research source}
- Leave this to cure for 12-24 hours.

Part 3

Part 3 of 4:

Applying the First 2 Coats

Download Article

1
Apply the first coat of straight polyurethane from the can. Dunk your brush into the full-strength polyurethane and brush it onto the surface. Start on 1 side of the project and work systematically to the other side. Use long, even strokes. Stretch out the finish as thin as possible. ^{[16]
X
Research source}
- Always apply the finish as evenly as possible. ^{[17]
  X
  Expert Source
  
  William & Shannon Latil
  Furniture Refinishing & Home Remodeling Specialists
  
  Expert Interview. 29 October 2021.}
- When bubbles occur, brush back over the finish lightly to cause them to pop. ^{[18]
  X
  Research source}
- You can also use a spray-on finish instead of brushing it on. ^{[19]
  X
  Expert Source
  
  William & Shannon Latil
  Furniture Refinishing & Home Remodeling Specialists
  
  Expert Interview. 29 October 2021.}
2
Brush on a second undiluted coat of polyurethane. Once the entire surface is wet with your first coat, go back over it with another coat of full-strength polyurethane straight from the can. Use long, even strokes. Overlap each stroke to ensure smoothness. ^{[20]
X
Research source}
- Watch for any drips and smooth them out with your brush as they occur.
{"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/d\/dc\/Apply-Clear-Coat-on-Wood-Step-12.jpg\/v4-460px-Apply-Clear-Coat-on-Wood-Step-12.jpg","bigUrl":"\/images\/thumb\/d\/dc\/Apply-Clear-Coat-on-Wood-Step-12.jpg\/aid9692919-v4-728px-Apply-Clear-Coat-on-Wood-Step-12.jpg","smallWidth":460,"smallHeight":259,"bigWidth":728,"bigHeight":410,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/3.0\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}

3
Check for drips and then let the finish dry for 24 hours. Wait 5 minutes after application and then examine the surface a final time for drips. If you find any, use your brush to smooth them out. Before moving on to your final coat, let the first 2 cure completely over a 24 hour period.
- Make sure the surface is fully dry to the touch before proceeding.

Part 4

Part 4 of 4:

Applying the Final Coat

Download Article

Rub the sandpaper over the surface of your wood until it feels smooth to the touch. Inspect the surface closely and smooth out any major bubbles, specks, and runs. You want the wood to be as smooth as possible before adding the last coat of polyurethane. ^{[21]
X
Research source}
2
Wipe down the surface with a tack rag. A tack rag is a sticky cloth that you can purchase at home improvement stores. Use it to remove as much sanding dust as you can from the surface. The smoother the surface, the better the project will look after the final coat. ^{[22]
X
Research source}
- If you don’t have a tack rag, you can use a moistened lint-free cloth or a vacuum cleaner.
3
Apply a full-strength final coat. Just as you did with the initial coats, brush the polyurethane onto the surface, working systematically from one side of the project to the other. Pop any bubbles you see by brushing back over the finish. Move in the direction of the wood grain. ^{[23]
X
Research source}
- Always stretch the polyurethane as thin as you can.
- Let the surface cure for 24 hours.

Expert Q&A

Search

Add New Question

Question

How do I get a smooth clear coat finish on wood?

William & Shannon Latil
Furniture Refinishing & Home Remodeling Specialists
William & Shannon Latil are Furniture Refinishing & Home Remodeling Specialists and the Founders of Furniture Refinishing Services based in Houston, Texas. With over 30 years of experience, William and Shannon specialize in repairing and restoring wood furniture, refinishing kitchen cabinets, remodeling kitchens, and building live-edge wooden tables. William and Shannon have won Awards for Excellence from the Better Business Bureau and the Houston Chronicle Best Small Business Award. Their work has also been featured in Houston Press Magazine - Kitchen Design. Additionally, the Furniture Refinishing Services team has conducted major refinishing work on venues such as NRG Stadium and Minute Maid Park.

William & Shannon Latil

Furniture Refinishing & Home Remodeling Specialists

Expert Answer

Sanding the wood will leave it very, very smooth to the touch. In order to not rash, make sure you apply the finish evenly over the entire piece — if you apply too much finish, it will be too tick and will rash.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 3

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Things You’ll Need

Oil-based polyurethane
Foam or natural bristle brush
Clean bucket or glass jar
Paint thinner
Lint-free cloth
Wooden wand or stirrer
100-grit sandpaper
150-grit sandpaper
220-grit sandpaper
280-grit sandpaper
Tack rag (or vacuum cleaner)

[1]

[2]

[3]

Expert Source

William & Shannon Latil
Furniture Refinishing & Home Remodeling Specialists

[4]

[5]

[6]

Sarah Fogle
DIY Specialist

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

Log in

How to Apply Clear Coat on Wood

Steps

Sanding and Cleaning the Surface

Sealing the Surface

Applying the First 2 Coats

Applying the Final Coat

Expert Q&A

Tips

Things You’ll Need

You Might Also Like

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories