Download Article
Download Article
Hydrogen peroxide is an ingredient that is included in most commercial hair dyes. It is a cheap, easy way to brighten your hair or bring out your natural highlights. However, keep in mind that with any home bleaching or dyeing process, there is a chance of damaging your hair or getting an unnatural looking result. See a professional hair stylist if you are planning on making a dramatic change or if your hair is already damaged or discolored.
Steps
-
Start with healthy hair . Even old hair dye can affect the results. Don't dye or otherwise process your hair in the weeks leading up to the bleaching. Bleaching your hair will work better and cause less damage if your hair is strong and unprocessed. If your hair is damaged or processed, then you are better off going to a salon. [1] X Research source Strengthen your hair in the following ways:- Use a natural shampoo and conditioner . Avoid products containing sulfates, which dry out your hair.
- Avoid chemical-laden hair sprays, gels, straightening products, and other hair products.
- Don't apply heat to your hair with a straight iron, blow dryer, or other heating appliance.
-
Gather your supplies. To bleach your hair with peroxide, you'll need the following materials. Gather them together and set them up on a table in your kitchen or bathroom: [2] X Research source- A 3% hydrogen peroxide solution. Any higher than 3% and you risk hair loss when applying. Not fun!
- A clean, empty spray bottle. You can buy a new one at the drugstore, or use an old one. If you use an old one, wash it out thoroughly. If you're going to store the peroxide, keep it in a dark bottle and away from light.
- Hair clips.
- Cotton balls.
- A towel.
- Gloves.
- Aluminum foil, if you plan to do highlights .
- Shower cap, if you plan to bleach your whole head of hair.
Advertisement -
Wash and condition your hair. On the day you plan to bleach your hair, wash and condition it as normal to make sure the oils and grime caused by natural wear and styling products don't interfere with the peroxide.- Condition well with a good natural conditioner. Bleaching your hair with peroxide can dry it out, and conditioner will protect it during the process.
- Let your hair air-dry instead of blow drying it. Pat it dry with a towel to keep it from dripping, comb it out gently, and let it dry for about thirty minutes. Hair that is a little wet will take the hydrogen peroxide better.
EXPERT TIPHair Stylist & Master BraiderNdeye Anta Niang is a Hair Stylist, Master Braider, and Founder of AntaBraids, a traveling braiding service based in New York City. Ndeye has over 20 years of experience in African hair including braiding box braids, Senegalese twists, crochet braids, faux dread locs, goddess locs, kinky twists, and lakhass braids. Ndeye was the first female of her tribe in Africa to move to America and is now sharing her knowledge of African braids passed on from generation to generation.Use gentle conditioning formula if bleaching natural hair yourself. Bleaching natural hair yourself can damage it, so choose a gentle formula that conditions as it lightens. While getting it done professionally is best, understanding the process and using a conditioning bleach makes DIY lightening less harsh on your strands.
Advertisement
-
Do a strand test. Take a small section from the underside of your hair and use a cotton ball to apply peroxide. Let it sit for a few minutes, then check it. You can leave it in for up to 30 minutes if desired, but rinse it out with cold water when it reaches your desired color. Make sure to pay attention to how much time it takes to reach the desired color and use this time to help you determine how long to leave the peroxide on the rest of your hair.- It is important to do a strand test because hydrogen peroxide may result in damage to your hair.
-
Section your hair with clips. Once your hair is reasonably dry, section off parts of hair you want bleached with claw clips. Sectioning your hair will help you make sure you treat every last lock with peroxide.- If you want a very even bleach, the claw clip method is highly recommended. It takes more time, but it looks more professional and it offers more even highlights.
- Leave the first section of hair that you want to treat down. You'll unclip further sections as you go.
-
Apply the peroxide to sections for highlights. For bringing out natural highlights, apply peroxide with a cotton ball. Pour some peroxide on a cotton ball. Smooth it over vertical sections of hair that are about 1 ⁄ 4 inch (6.4 mm) thick. Start at the roots and stroke down to the tips with the cotton ball.- Wrap each hair section in a piece of tin foil to keep the peroxide from getting onto the rest of your hair.
- Repeat this process with multiple sections of your hair for all over highlights, or just do a few sections towards the front of your face for face framing highlights.
-
Apply peroxide to the bottom half of your hair for an ombre effect. If you want an ombre look, start applying the peroxide near the ends of your hair. Use a cotton ball to apply peroxide to the bottom half of your hair all around your head.- To avoid a blunt, horizontal line through your hair, apply the peroxide to a different spot on each strand of hair. You should still aim to apply it somewhere near the middle of the strand.
- You can go as far up the strands of hair as you want, but make sure to begin the application at your ends. This way the tips will be a brighter blonde and the color will fade to a darker shade as you move up towards your roots. [3] X Research source
-
Use a spray bottle to apply peroxide to your whole head. To bleach all of your hair, use a spray bottle to spray the entire section of hair you left down. Spray it thoroughly and run a comb through your hair multiple times. Repeat with the remaining clipped sections of your hair.- After you have finished applying the peroxide, put on a shower cap to keep the peroxide from dripping or touching your clothes.
-
Leave the hydrogen peroxide in your hair for about 30 minutes. Depending on how dark your hair is, how light you want it, and how much irritation the chemical may cause, you'll want to experiment and play around with it.- Use your strand test to help you determine how long to leave the peroxide in your hair. You may only need a few minutes, or you may need the full 30 minutes.
- Follow the manufacturer's instructions, and do not leave the beach on your head for longer than 60 minutes.
- When you are ready to rinse, remove the tin foil or shower cap if you used them.
-
Wash your hair thoroughly with cold water and apply conditioner. Shampoo your hair to remove the peroxide, and rinse with cool water to add shine. The conditioner will help to restore some of the lost moisture.- Add another coat of deep conditioner to your hair. Massage it into your scalp to ease any dryness or irritation the peroxide might have caused. Rinse it out with cool water.
- Allow your hair to air dry, then style as desired.
Advertisement
-
Repeat the process to lighten your hair further. The first time you use the peroxide treatment, your hair may get just a little lighter. If you want to lighten your hair more, then you'll have to repeat the treatment one or more times.- Your hair will become much lighter if you repeat this process in smaller doses every day for a week than if you use a whole bottle of hydrogen peroxide on your hair one night.
- The final color also depends on what color your hair was to start out with.
- If your hair is very dark, your peroxide-saturated hair might seem a bit more orange at first. Keep continuing the treatment and your hair should seem blonder.
EXPERT TIPLicensed CosmetologistLaura Martin is a Licensed Cosmetologist based in Milledgeville, Georgia. She has been working as a hair stylist since 2007, and began a career as a cosmetology teacher in 2013. She worked as a teacher at Arrojo Cosmetology School, teaching cosmetology practices, hairstyling, and hair color application. She also brought her cosmetology expertise to her work as a staff writer for fashion blog Style Noted, writing pieces related to hair and fashion. She received an MFA in Creative Writing from Georgia College & State University, where she was also an English Teaching Fellow. Additionally, she received a BA in Creative Writing and Literature from New York University.Wait at least a week between treatments. Laura Martin, a licensed cosmetologist, advises: "A single application may lighten hair anywhere from 1-3 levels. It could take a month or two to reach your desired result since you should wait a week between applications to avoid damaging your hair."
-
Apply gentle heat to speed up the process. Using a hair dryer on a low setting to gently heat your hair can help to speed up the lightening process. Turn on your hair dryer to a low heat setting and move it from root to strand all over your head. Do this until your hair reaches the desired lightness.- It is best to use heat if you have bleached your hair with peroxide before and have a good idea of how it will turn out. If you are not sure, then avoid using a hair dryer. Go slow instead and see how the peroxide affects your hair as it air dries. [4] X Research source
-
Wash your hair less often. Don't wash your hair every day. Washing your hair daily strips out natural oils that protect your hair from breaking. Try shampooing your hair only once or twice per week and use a dry shampoo (a powder you comb into your hair) to keep it looking fresh between washes. -
Use a violet-tinted conditioner once or twice a week. This will control any yellow tones in your hair. You can buy a violet conditioner at a grocery store or beauty store. -
Cut back on heat treatments. Don't blow dry or straighten your hair too much. These heating tools can exacerbate the damage caused by the peroxide, so only use them once a week or less. Try using heat free styling methods, or use a hair dryer on a lower setting. -
Handle your hair gently. Let your hair air dry as often as possible, and don't wring it out or rub it with a towel after showering. Just give your hair a gentle squeeze with the towel, and then leave it be for a while. [5] X Research source Also, make sure that when you brush your hair, you start from the ends and go slow to avoid breaking your strands.
Advertisement
Expert Q&A
Search
-
QuestionIs it bad to put hydrogen peroxide in your hair?Laura Martin is a Licensed Cosmetologist based in Milledgeville, Georgia. She has been working as a hair stylist since 2007, and began a career as a cosmetology teacher in 2013. She worked as a teacher at Arrojo Cosmetology School, teaching cosmetology practices, hairstyling, and hair color application. She also brought her cosmetology expertise to her work as a staff writer for fashion blog Style Noted, writing pieces related to hair and fashion. She received an MFA in Creative Writing from Georgia College & State University, where she was also an English Teaching Fellow. Additionally, she received a BA in Creative Writing and Literature from New York University.Hydrogen peroxide can cause dryness and damage, but it isn't as harsh as many other chemicals. Used in moderation, it won't have a negative effect on the hair.
-
QuestionHow long does it take for hydrogen peroxide to bleach hair?Laura Martin is a Licensed Cosmetologist based in Milledgeville, Georgia. She has been working as a hair stylist since 2007, and began a career as a cosmetology teacher in 2013. She worked as a teacher at Arrojo Cosmetology School, teaching cosmetology practices, hairstyling, and hair color application. She also brought her cosmetology expertise to her work as a staff writer for fashion blog Style Noted, writing pieces related to hair and fashion. She received an MFA in Creative Writing from Georgia College & State University, where she was also an English Teaching Fellow. Additionally, she received a BA in Creative Writing and Literature from New York University.The speed at which peroxide lightens your hair is dependant on how dark your natural hair color is and how thick your hair strands are. You will generally achieve the maximum lightening possible in a single session after an hour. You may need to wait a couple of weeks and repeat the application.
-
QuestionCan peroxide be used to bleach hair?Laura Martin is a Licensed Cosmetologist based in Milledgeville, Georgia. She has been working as a hair stylist since 2007, and began a career as a cosmetology teacher in 2013. She worked as a teacher at Arrojo Cosmetology School, teaching cosmetology practices, hairstyling, and hair color application. She also brought her cosmetology expertise to her work as a staff writer for fashion blog Style Noted, writing pieces related to hair and fashion. She received an MFA in Creative Writing from Georgia College & State University, where she was also an English Teaching Fellow. Additionally, she received a BA in Creative Writing and Literature from New York University.Yes, it can. It is more effective at lightening when mixed with a powdered lightener but it will produce a subtle lightening effect on its own.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Reader Videos
Tips
- Since hydrogen peroxide can leave your hair with an orange or brassy tone, try washing your hair with a violet shampoo that is made for this purpose.Thanks
- A quality deep conditioner is a must whether you are bleaching your hair at home or professionally. Make sure you massage your conditioner into your scalp (it won't make your hair greasy if you rinse well).Thanks
- If you get any on your skin, wash it as soon as possible.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- If you have blonde hair, add 1 part peroxide to 2 parts shampoo, lather, and cold water rinse. Then add 1 part peroxide to 3 parts deep conditioner, apply to hair, wait 3-5 minutes, and rinse well with lukewarm water.
- Once you rinse out the peroxide, mix honey, cinnamon, and a small amount of conditioner together and cover your hair in it. Leave it in for half an hour and rinse it out entirely.
- Use violet shampoo to get rid of yellow tones and blue shampoo to get rid of orange.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Hydrogen Peroxide isn't safe to use around children as it will burn and be very painful if it gets in your eyes or if you swallow it. Be careful and use common sense.Thanks
- Don't just pour the bottle of peroxide over your head. Use a medium, like a cotton swab or spray bottle.Thanks
- Keep an eye on the bleach, as it can affect one person's hair quicker than others.Thanks
- Don't wash it out quicker than the instructions say or you won't get a good result.Thanks
- Don't rub your scalp too hard when washing it.Thanks
Advertisement
Things You'll Need
- 3% hydrogen peroxide solution
- Cotton swabs and/or spray bottle
- Deep conditioner
- Running cold water
- Brush or comb
Expert Interview
Thanks for reading our article! If you’d like to learn more about bleaching your hair, check out our in-depth interview with Wyvetta Bowles .
References
- ↑ http://bargainbabe.com/how-to-dye-your-hair-hydrogen-peroxide/
- ↑ http://bargainbabe.com/how-to-dye-your-hair-hydrogen-peroxide/
- ↑ https://www.centre-clauderer.com/en/hair-care/oxygenated-hair-water
- ↑ http://bargainbabe.com/how-to-dye-your-hair-hydrogen-peroxide/
- ↑ https://www.centre-clauderer.com/en/hair-care/oxygenated-hair-water
About This Article
Article Summary
X
Before you bleach your hair, wash it with shampoo and conditioner and let your hair air dry for 30 minutes. Then, section your hair using hair clips so it's easier to bleach. Once your hair is sectioned, fill a spray bottle with 3-percent hydrogen peroxide and spray each of the sections one at a time until they're completely covered. In order to get the full bleached effect, put a shower cap on and wait 30 minutes before washing your hair thoroughly. To learn how to get highlights or an ombre effect with hydrogen peroxide, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 5,112,575 times.
Reader Success Stories
- "With COVID, my roots are 2+ inches! I want to at least lighten a few strands so the regrowth isn't so obvious. This article gave enough data to learn I can lighten using the peroxide, but to bleach it to the blonde shade I need, would take several applications." ..." more
Advertisement
"With COVID, my roots are 2+ inches! I want to at least lighten a few strands so the regrowth isn't so obvious. This article gave enough data to learn I can lighten using the peroxide, but to bleach it to the blonde shade I need, would take several applications."
..."
more
"I have dark brown hair that is pretty thick, so when I tried to dye the tips purple with Kool Aid, the color didn't show up. I used the peroxide process three times, and it lightened my hair enough for the color to show up. Easy and cheap!"
..."
more
"Worked great. Lightened my hair just like I wanted. Took about 45 minutes to do my hair. I have very thick hair, and it was easy to do. Will not be having it done and paying for it again."
..."
more
"Thanks for this, it helped me a lot. I'm doing the strand test now. If it works, I will ask my mom if I can ombre my hair. Hope it works. Good to know it stays forever. :)"
..."
more
"I had never heard of this. I had always used whatever the boxed hair color supplied. What a great way to save money and still look like a million bucks!"
..."
more
