PDF download Download Article PDF download Download Article

Summertime isn’t complete without a good ole campfire, but how do you build one? Starting a campfire at a campground or in backcountry is a breeze once you know which sticks to grab and how to arrange them. That’s why we’ve put together a step-by-step guide to safely and successfully building your own friendly campfire. Keep scrolling so you can get to those roasted marshmallows and campfire songs!

Things You Should Know

  • Lay 2 pieces of firewood parallel to each other, then stack 2 more logs on top that are perpendicular to the base. Build a few more layers like this.
  • Arrange tinder and kindling around the base of the wood and light it to get the fire going.
  • When you're done, extinguish the fire completely by pouring water over it.
1

Build a fire ring in a safe location.

PDF download Download Article
  1. if you can't find one and your camping site allows it. Use a shovel to clear a circle of bare dirt about 10 feet (3.0 m) wide. In the center, dig a shallow fire pit 2 feet (0.61 m) wide and 6 inches (15 cm) deep. [1] Use dirt or medium-sized stones from nearby to build a circular barrier around the central pit. [2]
    • Look for a spot on level ground away from overhanging branches, dry grass, or brush. Stay away from the bases of any hills (escaped fires travel quickly uphill). [3]
    • Whenever possible, it’s best to use an existing fire ring to safely contain your fire and preserve the beauty of the campground or backcountry. [4]
  2. Advertisement
2

Collect your tinder.

PDF download Download Article
  1. Look for tiny dried twigs, dry leaves or grass, or pine needles to start your fire with. You can even use crumpled newspaper or dryer lint from home if you plan ahead. Place your tinder in the center of your fire ring. [5]
    • More options for making tinder for your fire could be wood chips or shavings, pieces or strips of cardboard, candle wax, cotton balls, or a commercial fire starter .
    • All of your tinder material—including twigs or sticks—should be small enough to fit in your cupped hands and very thin (around the width of pencil lead).
3

Gather kindling and firewood.

PDF download Download Article
  1. [6] The best kindling sticks will be about 1 inch (2.5 cm) wide and long enough to reach from your elbow to your fingertips. Firewood will be larger—about the thickness of an adult wrist (or more) and as long as an arm. [7] Buy firewood or kindling from a store near the campground if your site or park doesn’t allow collection, like in many national parks. [8]
    • Only use firewood found or bought near the campsite. Wood from home can harbor pests that can interfere with the site or park’s local ecosystem if they escape and spread. [9]
    • Keep large piles of kindling and firewood near the fire so you don’t have to leave it unattended to gather more.
  2. Advertisement
4

Arrange the kindling and firewood.

PDF download Download Article
  1. While any configuration can technically work, set up your kindling and firewood for success based on your needs. Here are some common and useful ways to build your campfire: [10]
    • A teepee fire is simple and effective. Lean your kindling together to make a teepee (cone) shape over your tinder. Leave space between the sticks so air can feed your flames. As the fire grows, add bigger pieces of firewood.
    • A log cabin fire is great for long lasting warmth. Lay 2 large pieces of firewood parallel to each other. Put 2 more logs on top, perpendicular to the base. Build a few more layers like this, then make a teepee with kindling around the base.
    • Build a platform fire to cook over your open flames. Make a base of 2 or 3 large logs lying horizontally. Then place smaller logs vertically on top. Build a small teepee of kindling at the very top so the fire burns downward.
    • Build a star fire when you’re low on firewood. Make a small teepee with kindling, then lay several logs around the teepee so that only one end of each log is touching the teepee. The logs will be slowly consumed by the fire.
    • Make a lean-to fire to protect against wind and rain. Put down one large log, then lean smaller pieces of firewood against it perpendicularly to make a lean-to. Make a mini-teepee under the lean-to.
5

Light the fire.

PDF download Download Article
  1. Ignite the tinder first to spread fire to the kindling and firewood. Once the tinder catches the kindling on fire, keep adding kindling to sustain and grow the flames. Add firewood once the fire is large and stable enough to light bigger pieces of wood. [11] For safety, use only matches, a lighter, or a small amount of lighter fluid if the tinder won’t catch.
    • As you add wood, leave room for air to circulate within the fire. Only use dry kindling and firewood when possible (it burns easier and smokes less).
    • Besides lighter fluid, avoid other accelerants (chemicals that ignite raging fires) like gasoline since they can easily burn out of control and become dangerous. [12]
    • Never squirt or spray lighter fluid or any other chemicals onto embers or an open flame. This could result in sudden flare ups, burns, or spreading the fire.
  2. Advertisement
6

Put out your fire.

PDF download Download Article
  1. A gust of wind can reignite or spread embers when you’re not looking, so this is extra important. Check to see if your campfire is still too hot to touch. If it is, pour water over the fire, logs, and pit to put it out completely . [13]
    • If you don’t have water, cover the embers and logs with dirt. Use a poker or shovel to continually stir the dirt and embers around until they are fully extinguished.
    • It's best not to use sand to cover a campfire. The fire may look like it's out on the surface but still burn underneath the sand (because it's insulating). If sand is all you have available, make sure to stir it around and put out the embers, not just cover the fire.
    • A good rule of thumb for putting out campfires is “if it’s too hot to touch, it’s too hot to leave.” [14]
7

Cleanup all traces of your fire.

PDF download Download Article
  1. Replace any soil you used where you found it, and scatter unburnt wood to make the area look as natural as possible. Make sure your wood or coals are completely burnt and crushed into dust, then scatter them over a large area away from your campsite. [15]
    • Clean up any litter, including uneaten food you roasted or garbage you burnt, and dispose of it according to the rules of your campsite.
    • Wait until your fire is completely extinguished and cool before you begin cleanup.
  2. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you put out a campfire without water?
    Britt Edelen
    Outdoor Educator
    Britt Edelen was an active member of his local Boy Scouts troop near Athens, Georgia from ages 8 to 16. As a Scout, he went on dozens of camping trips, learned and practiced many wilderness survival skills, and spent countless hours appreciating the great outdoors. In addition, Britt worked as a counselor for several summers at an adventure camp in his hometown, which allowed him to share his passion for and knowledge of the outdoors with others.
    Outdoor Educator
    Expert Answer
    If you don't have water, you can use dirt. Just make sure you're using a lot of dirt to snuff out any oxygen. Sand is another good option, so long as you make sure the fire is extinguished and not just covered by the sand.
  • Question
    How much kindling would I need to keep a fire going all night?
    Britt Edelen
    Outdoor Educator
    Britt Edelen was an active member of his local Boy Scouts troop near Athens, Georgia from ages 8 to 16. As a Scout, he went on dozens of camping trips, learned and practiced many wilderness survival skills, and spent countless hours appreciating the great outdoors. In addition, Britt worked as a counselor for several summers at an adventure camp in his hometown, which allowed him to share his passion for and knowledge of the outdoors with others.
    Outdoor Educator
    Expert Answer
    The advice that was always given to me in Boy Scouts was if you need to keep a fire going all night, or for 24 hours, you need a pile of kindling that's the size of a VW Beetle. Then, just to be safe, double it. So basically two cars worth of kindling. That 100% will get you through the night.
  • Question
    What size sticks should I use for a campfire?
    Britt Edelen
    Outdoor Educator
    Britt Edelen was an active member of his local Boy Scouts troop near Athens, Georgia from ages 8 to 16. As a Scout, he went on dozens of camping trips, learned and practiced many wilderness survival skills, and spent countless hours appreciating the great outdoors. In addition, Britt worked as a counselor for several summers at an adventure camp in his hometown, which allowed him to share his passion for and knowledge of the outdoors with others.
    Outdoor Educator
    Expert Answer
    It depends on the size of the fire. You can't just continue putting big sticks on a small fire because that will suffocate it. To maintain size and maintain safety, you'll want to use smaller sticks when the fire is smaller and then add bigger sticks as it grows.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      • Only gather dead wood you find on the ground. Never cut or break branches from living or downed trees since they’re part of the local ecosystem and provide food and shelter for animals. [16]
      • To start a fire with wet wood, make sure that your kindling material is dry to begin with. Build a raised fire bed to keep your fire off the wet ground, and chip away the bark or outer layers of wet firewood to reveal the drier wood inside. [17]
      • Always review your campground or local area’s rules about where you can build a campfire and how big you’re allowed to make it.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement


      About This Article

      Article Summary X

      To build a campfire, start by digging a shallow pit and clearing out any nearby vegetation. Then, put some tinder, like crumpled up paper or wood shavings, in the bottom of the pit. Next, arrange your kindling and firewood around the tinder in a teepee shape. When you're ready to light the fire, hold a lighter underneath the tinder until it catches. Wait for the flames to spread to the kindling and firewood. If they go out before the bigger pieces of wood catch, try adding more tinder and relighting the fire. If you want to learn more, like different shapes that you can build your campfire, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 444,703 times.

      Reader Success Stories

      • D. C.

        Nov 30, 2016

        "I needed to know different ways to build a fire for an essay I have to write. I expanded on what I learned here, ..." more
      Share your story

      Did this article help you?

      Advertisement