How to Build a Protein Skimmer

PDF download Download Article
PDF download Download Article

A protein skimmer is a device used to remove organic compounds like food particles, solid waste, and other pollutants from aquariums and fish tanks. You can build your own DIY counter-current skimmer at home using ordinary PVC pipe, a wooden airstone, and some rubber suction cups. Once installed, the skimmer will release small air bubbles into your aquarium that will pull loose particles out of the water and deposit them in the built-in collection cup.

Part 1
Part 1 of 3:

Fashioning the Collection Cup

PDF download Download Article
  1. Peel the labels off of both bottles, then remove the lids and empty their contents into the sink (or drink them so you’re not wasting water). Use a pair of scissors to snip the top off of one of the empty bottles where it begins to taper. Do the same to the second bottle, then cut off the bottom end so that it forms a tube. [1]
    • Do your best not to crush or mangle the bottles while you’re cutting them.
    • You’ll be fitting the water bottles together to create a makeshift collection cup. If you want your collection cup to hold more debris, simply cut the tube piece slightly longer.
  2. Turn the top piece upside down and slide the neck directly into the tube. Continue pushing the piece in until the bottom edges of both pieces are aligned, or until it won’t go any further. Together, these two bottle pieces will serve as your collection cup. [2]
    • When you activate your finished skimmer, stray proteins in the water of your aquarium will be trapped by bubbles generated by your air pump, pulled up through the chamber of your skimmer, and forced out through the mouth of the top bottle piece, where they’ll accumulate on the inside of the tube piece.
    Advertisement
  3. Squeeze a dime-sized glob of silicone onto the seam where the edges of the two bottle pieces connect. Use the pad of your finger or another tool, such as a folded paper towel, to spread the silicone into a thin layer. [3]
    • Don’t forget to wash your hands thoroughly with soap and hot water when you’re done to scrub away any traces of silicone.
    4. Advertisement

[4]

  1. 1
    • Aquarium silicone is a high-strength type of adhesive that’s designed specifically for bonding underwater. You can pick up a small bottle of aquarium silicone at any pet shop or aquarium supply store for around $3-5. [5]

    Tip: Make sure that entire seam is coated evenly all the way around. In order for your skimmer to work properly, it’s important that your collection cup be watertight.

  2. Aquarium silicone usually dries in a matter of minutes. However, it will take closer to a full day for the material to harden completely. At this point, it will be able to provide a waterproof seal.
    • Some aquarium silicone formulas may take up to a full week to cure. Make sure you read the specs on the product you’re using to determine whether it fits the timeframe you've set for your project. [6]
    3. Advertisement
Part 2
Part 2 of 3:

Assembling the Skimmer Chamber

PDF download Download Article
  1. Cut a piece of PVC pipe 1–3 inches (2.5–7.6 cm) shorter than your tank. To make a skimmer for a standard-sized fish tank that holds 40 gallons (150 L) or less, thin-walled PVC with a 2 in (5.1 cm) diameter will work best. Use a pipe cutter or hacksaw to trim the PVC down to the necessary specifications. [7]
    • You can also saw through PVC pipe using a length of nylon string if you don’t have access to one of these other tools. [8]
    • Cutting your skimmer’s reaction chamber slightly short will allow you to adjust its position once inside the tank to generate the maximum amount of airflow.
  2. Set your holes 2–3 inches (5.1–7.6 cm) inward from the ends of the pipe. Mark the position of each hole with a pencil, doing your best to line them up as precisely as possible. Bore a clean, straight hole through each marking at a 90-degree angle. [9]
    • You’ll be fitting these holes with suction cups to mount your finished skimmer to the wall of your fish tank. Select a drill bit slightly smaller than the nubs on the backside of the suction cups, using the specific cups you bought for reference.
    • Be careful not to accidentally drill through the opposite side of the pipe—doing so will render your skimmer inoperable.
  3. Turn your PVC pipe around and rotate it 180-degrees. Drill an additional hole just above the end of the blank side. This hole will serve as the air intake for your protein skimmer. [10]
    • Later, you’ll use the air intake hole to thread the hose of your airstone, which is a device used to generate tiny bubbles in the water of an aquarium.
  4. Align the suction cup nubs with the holes, then press down on them firmly until they’re fully seated. They should fit snugly and stay put, provided you used an appropriately-sized drill bit. [11]
    • Any type of suction cup should do the trick, since your skimmer will be both lightweight and suspended underwater. 22 mm (0.87 in) cups are a fairly standard size.
    • If you’re worried that your suction cups might pull free of your skimmer or interfere with their airflow, you can seal the edges using your leftover aquarium silicone.
  5. Guide the hose into the open end of the pipe and out through the drilled hole. Continue feeding the hose through until the airstone itself rests inside the pipe. The rest of the hose should extend outside the pipe. [12]
    • Keep in mind that the airstone you use needs to be 2 inches (5.1 cm) or shorter in order to fit inside the PVC tube.

    Tip: If possible, use an airstone made from limewood or basswood. These materials produce ultra-fine bubbles, which will make your skimmer more efficient.

    6. Advertisement
Part 3
Part 3 of 3:

Installing the Skimmer

PDF download Download Article
  1. Be sure to switch off your pump before attaching the airstone. The end of the hose opposite the stone should just slide onto the corresponding pump fitting. Some models may need to be secured via a separate valve or latch. [13]
    • Read through the instruction manual for the specific model you’re using to ensure that your airstone is hooked up correctly.
  2. Once you’ve put the collection cup in place, your homemade skimmer will officially be complete. All that’s left to do is add it to your tank! [14]
    • A 16  fl oz (470 mL) bottle should just fit over a section of 2 in (5.1 cm) PVC pipe.
  3. Lower the bottom of the skimmer (the end with the air intake hole) into the tank, then turn the pump back on. As you do, you’ll notice a cascade of bubbles escaping from the mouth of the bottle. Raise or lower the pump a few times until the bubbles begin to appear steadily. [15]
    • You can also play around with the position of the collection cup instead if you want to go ahead and mount the skimmer, since it’s not fixed. [16]

    Tip: Ideal placement can vary depending on the size, volume, and surface pressure of your aquarium. Just make sure the collection cup remains above water level at all times.

  4. When you’re satisfied with the placement of your skimmer, press the suction cups into the wall of the tank to hold it in place. Use your other hand to brace yourself against the outside of the tank to prevent it from tipping or shifting.
    • The suction cups will make it easy to remove and reposition your skimmer, if necessary.
  5. After a few days, you’ll likely notice the water inside the collection cup become cloudy. This means its time to empty it. Slide the cup off the top of the skimmer and pour the dirty water down the drain. Then, wash it out thoroughly with clean water and slide it back on top of the skimmer chamber. [17]
    • If your collection cup is in need of a more thorough cleaning, soak it in a 10-1 mixture of distilled white vinegar and water. The acid will help dissolve algae, mineral deposits, and other stuck-on grime. [18]
    • The exact frequency of your cleanings will be determined by the volume of your tank and the amount of aquatic life it contains.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Do protein skimmers make water clearer?
    Luke Leskovisek
    Aquarium Expert
    Luke Leskovisek is an Aquarium Expert and the Owner of The Coral Crib, based in Bloomington, Illinois. With over five years of professional experience, Luke specifically focuses on coral aquaculture and growing coral. He and his team offer fish, aquariums, live rock, aquarium decor and lighting, water testing, aquarium cleaning and maintenance, and more to their customers.
    Luke Leskovisek
    Aquarium Expert
    Expert Answer
    Sure! Protein skimmers are one of the main types of mechanical filtration for saltwater aquariums, acting as a complimentary filtration system. They basically create a column of bubbles that catch the protein in the water and rise up into a collection cup, where the waste that's in the water is collected, being filtered out through bubbles, much like the foam from the ocean.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    Can I remove the skimmer after cycling?
    Caeiia
    Top Answerer
    No; it removes organic waste and helps keep the water clean, which is important in marine setups.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • You can also make a super-sized protein skimmer for extra large tanks using two 2 L (68  fl oz) and 4 in (10 cm) PVC pipe.
        Thanks
        Helpful 0 Not Helpful 0
      • If you’re worried about small fish finding their way into the chamber of the skimmer, cut a piece of porous foam to cover the opening.
        Thanks
        Helpful 0 Not Helpful 0
      • If you have an especially large aquarium and your skimmer is collecting significant amounts of organic matter, try running a line from the collection cup to a separate overflow tank.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      Fashioning the Collection Cup

      • Two 16  fl oz (470 mL) plastic water bottles
      • Aquarium silicone
      • Scissors

      Assembling the Skimmer Chamber

      • Thin-walled PVC pipe with a 2 in (5.1 cm) diameter
      • Pipe cutter or hacksaw
      • Cordless drill
      • Rubber suction cups
      • Wooden airstone and hose (preferably limewood or basswood)
      • Nylon string (optional)

      Installing the Skimmer

      • Submersible aquarium pump
      • Clean water

      You Might Also Like

      How to
      Siphon Water
      How to
      Change the Water in a Fish Bowl
      How to
      Repair a Leaky Aquarium
      How to
      Lower Your Nitrate/Nitrite Levels in Your Fish Tank
      How to
      Empty an Aquarium
      How to
      Lower Ammonia Levels in a Fish Tank if They Are Not Very High
      How to
      Lower Ammonia Levels in Your Fish Tank
      How to
      Decrease Aquarium Algae Naturally
      How to
      Fix Scratches on an Aquarium
      How to
      Reduce Chlorine in an Aquarium
      How to
      Control an Algae Bloom
      How to
      Clean an Air Stone
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about aquarium maintenance, check out our in-depth interview with Luke Leskovisek .

      References

      1. ↑ https://www.youtube.com/watch?v=223-24zhjoc&feature=youtu.be&t=138
      2. ↑ https://www.youtube.com/watch?v=223-24zhjoc&feature=youtu.be&t=145
      3. ↑ https://www.aquarium-pond-answers.com/2007/03/aquarium-silicone.html
      4. ↑ https://aquariumhunter.com/best-protein-skimmers-reviews
      5. ↑ https://fishlab.com/aquarium-safe-silicone/
      6. ↑ https://fishlab.com/aquarium-safe-silicone/
      7. ↑ https://makezine.com/projects/skill-builder-pvc-pipe/
      8. ↑ https://www.todayshomeowner.com/video/cutting-plastic-pipe-with-string/
      9. ↑ https://www.youtube.com/watch?v=223-24zhjoc&feature=youtu.be&t=159
      1. ↑ https://www.youtube.com/watch?v=223-24zhjoc&feature=youtu.be&t=166
      2. ↑ https://www.youtube.com/watch?v=223-24zhjoc&feature=youtu.be&t=170
      3. ↑ https://www.youtube.com/watch?v=223-24zhjoc&feature=youtu.be&t=174
      4. ↑ https://www.tropicalfishcareguides.com/fish-tank-air-pump/
      5. ↑ https://www.youtube.com/watch?v=223-24zhjoc&feature=youtu.be&t=185
      6. ↑ http://reefkeeping.com/issues/2002-06/fm/feature/index.php
      7. ↑ https://www.youtube.com/watch?v=223-24zhjoc&feature=youtu.be&t=200
      8. ↑ https://www.youtube.com/watch?v=223-24zhjoc&feature=youtu.be&t=219
      9. ↑ https://reefbuilders.com/2017/01/16/how-to-clean-a-protein-skimmer/

      About This Article

      Article Summary X

      To build a protein skimmer, start by cutting a plastic water bottle in half and gluing the upper half upside down in the lower half using aquarium silicone. Then, cut a piece of PVC pipe so it's 1-3 inches shorter than your tank, and drill 2 parallel holes on one side of the pipe and 1 hole near the end of the other side. Next, insert suction cups into the parallel holes, and thread the hose of your airstone through the other hole. Finally, connect your airstone to your submersible pump, and slide the plastic bottle over the pipe. To learn how to position the skimmer in your tank, scroll down!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 68,220 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement