How to Calibrate a Digital Scale With and Without Weights

PDF download Download Article
Simple steps to get your scale to measure accurately
PDF download Download Article

Over time, your digital pocket scale can get uncalibrated, whether it’s from regular use, wear and tear, or moving it to a new location. If your scale is giving you inaccurate measurements, it just takes a few quick steps to calibrate it and get it back to tip-top shape. Keep reading to learn how to easily calibrate your scale with calibration weights or household items like coins. Then, we’ll go over how to store and clean your scale to keep it measuring accurately!

Things You Should Know

  • Wipe your scale with a damp, soapy cloth and set it down on a flat, sturdy surface. Then, turn on your scale and let it warm up for 1 minute.
  • Consult your scale’s owner’s manual to enter calibration mode. For instance, hold the “MODE” button until the display screen flashes “CAL.”
  • Add calibration weights , nickels, or pennies on the scale to match the weight on the screen. Keep them on the scale until the display flashes “PASS.”
Method 1
Method 1 of 2:

Calibrating Your Scale

PDF download Download Article
  1. Dampen a microfiber cloth in a mixture of warm water and dish soap. Then, wipe the cloth over your scale to remove any dust, debris, and stuck-on residue that might affect the calibration process. Dry the scale off with a towel and then set it down on a sturdy, level surface, like a table or counter. Just make sure the spot you choose is free from air currents, vibrations, and high humidity as they can affect the calibration process. [1]
    • If you’re unsure whether the surface is level, use a carpenter’s level to check. Or, place a small ball or pencil on the surface to see if it rolls off.
    • To reduce vibrations and shakes, place a mouse pad, grip pad, or pot holder under your scale.
    • Place your scale away from electronic devices too, as they can affect the scale’s calibration and accuracy.
  2. Press your scale’s power button to turn it on. The button is typically on the front face of the scale, but depending on your scale it might be a switch on the back or side. Then, give your scale 1 minute to “wake up,” or wait as long as your scale model’s instructions recommend. [2]
    • Consult your device’s user manual for specific instructions. Some models ask you to wait 30 minutes for your scale to warm up while some don’t instruct you to let it warm up at all.
    • After warming up, most scales read “0.00” on their display.
    Advertisement
  3. Follow your scale’s instructions for putting it into calibration mode, which are detailed in its user guide. For some models, you press the “MODE” button until the scale’s display reads “CAL.” On other models, you turn the scale back off and then press a series of buttons to enter calibration mode. Some scales even have a calibration button labeled “CAL” that you press. [3]
    • If you can’t find your scale’s user manual, search for your model plus “user’s manual” online. Or, visit the manufacturer’s website.
  4. During calibration, most scales flash a weight on the screen, like 50.0, 100.0, or 500.0 grams, that you match with your own weights. You simply add calibration weights or U.S. coins on the scale until they add up to the weight on the scale’s display. For example, if the display weight is 50.0 g and you have 5.0 g weights, add 10 weights on the scale. [4]
    • If you don’t have weights , use an item that you know the exact weight of: [5]
      • Pennies made after 1983 weigh 2.5 grams (0.088 oz).
      • Nickels made after 1866 weigh 5 grams (0.18 oz).
      • Dimes made after 1965 weigh 2.27 grams (0.080 oz).
      • Quarters made after 1965 weigh 5.67 grams (0.200 oz).
      • A 500 ml (16.9 oz.) bottle of water weighs 500 g.
      • Or, fill a measuring cup with 500 ml (16.9 oz.) of water.
      • Candy bars that list their net weight on the packaging. [6]
    • Calculate the number of weights you need to reach the calibration weight by dividing the calibration weight by the mass of the weight you’re using.
    • Note : The weights of U.S. coins are not 100% accurate, as damage and debris can alter their mass. For the most accurate calibration, use calibration weights.
    • Do not use weights that are heavier than your scale’s weight capacity, as they can damage the scale’s ability to weigh items accurately.
  5. Most scales flash “PASS” on the screen if the calibration weight matches the weights you placed on the scale. This can take several seconds, so just wait for the “PASS” message before removing the weights. If the screen reads “FAIL” instead, repeat the calibration steps above. [7]
    • Consult your scale’s user manual to know when calibration is complete.
    • Some scales don’t flash a “PASS” message. Instead, you manually adjust the weight on the scale’s display to match the weights on the scale.
  6. Exit calibration mode and return your scale to normal weighing mode by turning it off. Then, check that your scale is calibrated correctly. Turn it back on and place an item on the scale that you know the exact weight of, like the weight or item you used for calibration. If the scale reads the correct weight, you successfully calibrated it!
    • If your scale does not read the correct weight, repeat the calibration steps until your scale is accurately calibrated.
    • If your scale still isn’t calibrating correctly: [8]
      • Replace the batteries. Low battery power can lead to inaccurate calibration.
      • Move your scale away from electronics and appliances. Static can interfere with the calibration process.
      • Ensure your power is working. If your scale is plugged into an outlet or USB port, plug in a different device to see if the power source is providing power.
    7. Advertisement
Method 2
Method 2 of 2:

Storing and Maintaining Your Scale

PDF download Download Article
  1. When you’re not using your scale, turn it off and put it away in a spot that doesn’t accumulate moisture or experience temperature fluctuations. Choose a flat, stable location that’s out of reach, like in a closet or on a high shelf, to protect the scale from damage and needing to be recalibrated often. [9]
    • Cover your scale with a towel or blanket, or put on the dust cover that came with it, to prevent dirt and debris from accumulating on it in storage.
    • Moisture, dirt, temperature fluctuations, and unsteady surfaces can cause your scale to malfunction or need recalibration.
  2. Specks of dust and debris can affect your scale’s accuracy. [10] To remove any dust that’s accumulated on your scale, simply brush it with a soft-bristled brush. Just be gentle with the brush so you don’t press your weight on the scale, as this can damage the scale’s ability to output accurate measurements.
  3. Ensure your scale is nice and clean before storing it away by mixing together warm water and a few drops of dish soap. Dampen a soft, microfiber cloth in the water and gently wipe it over the scale’s surface. Then, dry off any moisture by wiping the scale with a clean, dry cloth. [11]
    • Ensure the cloth is damp and not sopping wet, as water can damage your scale.
    • If you use your scale to weigh food for cooking and baking, gently scrape off any stubborn debris with a dull knife.
  4. If you’re using a battery-operated scale and it’s starting to malfunction or output inaccurate measurements, low batteries might be the culprit. Just replace them by opening up the battery compartment, removing the batteries, gently wiping the inside of the compartment, and then adding new batteries. [12]
    • Most scales flash a low battery warning on the screen when the batteries are running out of power.
    • Dispose of the old batteries by taking them to your local recycling center or dropping them off at an electronics retailer that recycles batteries.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I do a major calibration?
    Community Answer
    Calibration - that is, adjusting the scale so it weighs accurately over its range - depends on the model, so you have to read the instructions. It probably requires using a "standard weight" which you can easily buy online but need to keep clean. As a simple check each time I use it, I wrote its weight on each pot I use for samples. So I switch on the scale and it reads 0.00. Put the empty pot on and it reads the number on that pot. Then press "tare" to get zero before weighing a sample. If the empty pot doesn't weigh correctly, I need to calibrate the scale.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 11 Helpful 22
  • Question
    How do I calibrate my digital scale?
    Community Answer
    Hit on/off or the "zero" button. Make sure it is free of residue or dirt, and if you have a dish on it make sure to zero it with the dish on the scale.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 21 Helpful 32
  • Question
    What does it mean when it displays "0 L.D."?
    Community Answer
    It means you have exceeded the weight measurable on your scales (over load).
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 19
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • The calibration process varies for different digital pocket scale models. For instance, some models ask you to enter your own calibration weight instead of providing you with one.
        Thanks
        Helpful 0 Not Helpful 0
      • Consult your scale’s owner’s manual to find out how to calibrate it. The manual provides helpful tips that are specific to your scale’s make and model.
        Thanks
        Helpful 0 Not Helpful 0
      • Calibrate your scale whenever you notice the measurements are inaccurate, you move the scale to a new location, or you change altitudes.
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Damage and dirt can make coins heavier or lighter than expected. So, using coins to calibrate your scale instead of calibration weights can lead to inaccurate calibration.
        Thanks
        Helpful 2 Not Helpful 2
      • Never submerge your digital pocket scale in water or clean it with a sopping wet cloth. This can permanently damage the digital reading components inside the scale.
        Thanks
        Helpful 0 Not Helpful 1
      • Do not put weights on your scale that are heavier than its maximum capacity. Overloading your scale can permanently damage it, causing it to measure inaccurately.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Read a Ruler
      How to
      Read a Tape Measure in Inches or Centimeters
      How to
      Measure Centimeters
      How to
      Read a Vernier Caliper for Super Precise Measurements
      How to
      Measure 2/3 Cup with a 1/4 Measuring Cup
      How to
      Use a Ruler to Measure in Millimeters (Plus Estimating Lengths)
      Easy Ways to Measure Liquids When You Don’t Have a Measuring Cup
      How to
      Calculate Angles
      How Big Is an Inch? Here's How to Measure Accurately
      How to
      Read a Caliper
      How to
      Measure Without a Ruler
      How to
      Use Calipers
      How to
      Read a Dial Indicator
      How to
      Use a Dumpy Level
      Advertisement

      References

      1. ↑ https://www.rcbs.com/on/demandware.static/-/Library-Sites-HuntShootAccessoriesSharedLibrary/default/dw0eaa5d48/productPdfFiles/98914_PocketScale_1LIM_web.pdf
      2. ↑ https://www.farnell.com/datasheets/1722802.pdf
      3. ↑ https://sciencing.com/calibrate-small-scale-quarters-12097140.html
      4. ↑ https://www.farnell.com/datasheets/1722802.pdf
      5. ↑ https://www.usmint.gov/learn/coins-and-medals/circulating-coins/coin-specifications
      6. ↑ https://sciencing.com/calibrate-scale-weights-4740563.html
      7. ↑ https://sciencing.com/calibrate-digiweigh-scale-5340883.html
      8. ↑ https://awscales.com/content/scales/MS-600/MS-600_Manual.pdf
      9. ↑ https://awscales.com/content/discontinued-scales/blade-series_manual.pdf
      1. ↑ https://www.digiweigh-usa.com/DW-600W.pdf
      2. ↑ https://www.avsl.com/assets/manuals/4/5/456059UK.pdf
      3. ↑ https://www.acurite.com/media/manuals/00954-instructions.pdf

      About This Article

      Article Summary X

      If you need to calibrate a digital pocket scale, start by finding a solid item with no air pockets, like a U.S. coin, to use as a calibrating weight. As long as you know the item’s exact weight, it can be used as a calibration weight. To start calibrating, put your weight on the scale, enter its weight, and press the “Enter” key to store that data as a reference when you’re weighing. Next, add weight to the scale until you get near the maximum weight limit and check the scale to see if it matches the known weights you’ve placed on it. If the weight on the display doesn’t match what’s on the scale, adjust the calibration with the button on the front of the scale to tell it the actual mass. For more tips, including how to store and clean your scale, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 470,411 times.

      Reader Success Stories

      • Janet Casey

        Jul 31, 2022

        "I was trying to see how to calibrate my scales but I learned some new things. Thanks."
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement