PDF download Download Article PDF download Download Article

Cleaning acrylic – whether it’s furniture or picture frames – can be difficult because of how easily acrylic can scratch and how sensitive it is to certain cleaners. By preparing the acrylic you’re about to clean and using the cleaners appropriate to the type of acrylic you’re working on, you can clean your acrylic without damaging it.

Method 1
Method 1 of 3:

Cleaning Acrylic Windows

PDF download Download Article
  1. Because acrylic is easily scratched, you don’t want to just wipe away any dirt or dust that is on the surface of the window. Instead, use air or water to remove dirt before you begin to clean. You can use canned air to blow dirt off of the windows, or drip water onto the surface that picks up the dirt and allows you to float it off. [1]
    • If you use water, blot the window dry with a microfiber cloth after the dirt has come up.
  2. If your acrylic window still needs a bit of cleaning after you've removed the top layer of dust and dirt, use clear water to clean it. Simply repeat the process of dropping water onto the surface of the acrylic and blot it dry with a microfiber cloth. [2]
    • Don’t rub the window with the microfiber cloth as this can cause scratches in the acrylic.
    Advertisement
  3. If you’re washing particularly dirty or outside-facing windows, mix equal parts non-abrasive cleaner and water to make a cleaning solution. Then dip a microfiber cloth in the solution and gently blot the acrylic surface clean. [3]
    • Good non-abrasive cleaners for this type of cleaning are castile soap, baby shampoo, or Woolite or Dreft.
  4. Once you’re done cleaning the acrylic window, use a dry microfiber cloth to blot the surface of the window dry. Avoid wiping the cloth across the surface of the window as this can cause scratches. [4]
  5. If, once you’ve cleaned the window, you discover scratches in the surface, you can use car wax to remove them. Apply wax to the areas that are scratched and use the buffer that comes with the wax to buff the surface. [5]
    • If you’ve never buffed a surface before, proceed for gently with this step.
  6. If you have very deep scratches in the acrylic, you scrape the surface of the acrylic. Hold a sharp scarping tool at a 10 degree angle and move it from side to side, evenly and gently scraping off the excess. [6]
    • This technique should only be used for very, very deep scratches.
  7. Sanding the surface of acrylic gives it a matte finish, which gives it a frosted look. You can perform this technique with sand paper by hand, or with sanding tools. Simply sand the acrylic surface the same way you would with a piece of wood – start with a coarser sand paper and once you’ve worked over the entire surface, move to a finer paper and repeat the process. [7]
    • Using a buffer after you sand acrylic can give your acrylic an extra shiny finish.
    • This technique should only be used on unfinished acrylic or if your acrylic windows have suffered extreme damage from storms.
  8. Advertisement
Method 2
Method 2 of 3:

Cleaning Acrylic Furniture

PDF download Download Article
  1. The biggest concern with acrylic furniture is the risk of scratching. When you’re prepping the surface of your acrylic furniture, avoid using a dusting cloth to remove dirt and dust. These types of cloths can trap particles that won’t seem big to the naked eye, but will scratch your furniture. Use a clean microfiber cloth instead. [8]
  2. Even though acrylic furniture is clear, you shouldn’t use the same cleaners that you do on glass windows to clean it. Cleaners specifically made for plastics, like Brillianize cleaner, is the best option for cleaning your acrylic furniture. It prevents scratches and won’t leave a film on the surface or break down the acrylic, giving it a cloudy appearance. [9]
  3. Squirt a small amount of cleaner onto the piece of furniture you’re cleaning and then polish that area with your cloth. Once you’re done with that small area, move on to the next. Don’t spray the whole piece of furniture and then wipe it down. [10]
  4. Advertisement
Method 3
Method 3 of 3:

Cleaning Acrylic Tubs

PDF download Download Article
  1. When cleaning an acrylic bath tub, avoid using any aerosol or acetone cleaners. The chemicals in those cleaners can eat through the acrylic of your tub. [11]
  2. To clean acrylic bathtubs, use a mild dish soap with warm water. Wet the sides of the tub and a soft sponge with warm water. Apply a small amount of a mild dish soap to the sponge and gently scrub the tub. [12]
    • You should avoid using wire brushes or scrubbing pads as these can scratch the acrylic and ruin it.
  3. Instead of using cleanser on hard water stains on your bathtub, try rubbing lemons over the stains. Let the lemon juice sit on the stain for a few minutes, and then rinse with water and before drying it with a microfiber cloth. [13]
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How can I remove drops of hair color from white acrylic surfaces?
    Community Answer
    You should use a mix of baking soda, dish detergent, and water which will make a paste that should be able to remove it.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Expert Interview

      Thanks for reading our article! If you'd like to learn more about cleaning acrylic, check out our in-depth interview with Claudia & Angelo Zimmermann .

      About This Article

      Article Summary X

      Acrylic can be difficult to clean because of how easily it’s scratched, but by using the right cleaner, you can avoid damaging it. For acrylic windows, use water or a non-abrasive cleaner such as castile soap or baby shampoo and a microfiber cloth to gently blot the surface clean. To clean acrylic furniture, use a cleaner designed for plastic, like Brillianize cleaner, and clean small areas at a time with a microfiber cloth to prevent scratches. To clean acrylic tubs, wet a soft sponge with warm water and add a small amount of a mild dish soap to the sponge. Gently scrub the tub with the sponge to clean it. If the tub has hard water stains, rub lemons over them, then rinse the tub with water. For tips about how to remove scratches from acrylic, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 91,904 times.

      Reader Success Stories

      • Bernadette Petrie

        Aug 23, 2019

        "Wow, there is so much help for the elderly living on their own to keeping one's budget down. Most things ..." more
      Share your story

      Did this article help you?

      Advertisement