Download Article
Download Article
Mold on your walls can be unsightly, and even cause health problems if it gets out of control. Fortunately, you can remove mold quite easily, often with cleaning supplies that you already have in your home. You’ll also want to make sure that you have the necessary safety materials before starting. If you’re well-prepared and have patience, removing mold from finished, wood, or tile walls be a simple and inexpensive process.
Steps
-
Combine chlorine bleach and water in a large bucket. Your mixture should be 3 parts water to 1 part bleach. Pour the bleach into the bucket while you’re adding your water to ensure that the solution mixes evenly. Avoid spills by pouring your liquids slowly. [1] X Research source
- While working with bleach, make sure you wear rubber gloves, protective eyewear, and a dust mask or respirator, since bleach tends to cause irritation to the lungs. [2] X Research source
-
Dip a brush in the bleach solution and scrub the walls with it. You’ll want your brush to have hard, durable bristles. Begin scrubbing the mold by applying heavy pressure in a circular motion. Continue scrubbing until the mold stains are visibly gone.Advertisement
-
Leave your wall alone and let it air dry. You should try to maximize the amount of time your wall is in contact with the bleach, which means you’ll want to let you wall rest for a while. If the wall is excessively wet, soak up some of the excess water and bleach with a disposable rag. [5] X Research source
- It may be several hours before your wall completely dries. It all depends on the humidity and temperature, both indoors and outdoors.
-
Repeat the cleaning process until all stains are completely gone. It may take multiple applications of bleach and water to fully remove the mold. Your wall is not entirely free of mold until all visible stains and signs of the mold have completely disappeared. [6] X Research source
- If you cannot remove the mold after several applications of bleach and water, consider replacing the moldy section of your wall.
Advertisement
-
Vacuum the moldy wood to remove loose spores. Use a vacuum hose or handheld vacuum and turn it on the highest setting. Put your vacuum directly on the wood and run it across the moldy wood by moving it back and forth. Do this for several minutes in order to remove any loose mold spores that aren’t settled into the wood yet. [7] X Research source
- While vacuuming your wood, make sure that you wear rubber gloves, protective goggles, and long sleeves and pants. Wear your dust mask or respirator as well, since the loose spores could travel into your lungs. [8] X Research source
-
Apply soap and water to painted or finished wood. Fill a bucket with 1 part warm water and 1 part dishwashing detergent. Dip your soft-bristled scrub brush into the bucket and begin to gently scrub the wood. You should see the wood visibly begin to clear after several scrubs. Continue to scrub your wood until the mold is completely gone. [9] X Research source
- If there’s still mold on the wood after you’ve scrubbed it, repeat the process with vinegar instead of warm water and dishwashing detergent.
- Don’t scrub too hard or you’ll risk removing the wood’s paint or sealant.
- You can use an ammonia-free soap instead of dishwashing detergent if you prefer. [10] X Research source
-
Use bleach to remove mold from raw and unfinished wood. If the wood is unfinished or penetrated by the mold, you need to create a stronger cleaning solution. Fill a bucket with 1 part detergent, 10 parts bleach, and 20 parts warm water. Scrub the unfinished or penetrated wood with a scrub sponge or stiff brush and allow it to air dry. [11] X Research source
-
Sand the affected area to remove mold residue if necessary. If there’s still mold after you’ve scrubbed with detergent, soap, water, and bleach, you’ll likely need to sand the wood to remove the layer of mold. Use a piece of sandpaper and rub it into the wood in short, aggressive circular motions. Apply heavy pressure while scraping your wood. After the mold is visibly gone, reseal your wood with paint or sealant. [12] X Research source
- 40-150 grit sandpaper is a good starting point for the sanding process, since you need to remove an entire layer of wood to remove all of the mold. [13] X Research source
- You’ll get sawdust everywhere when sanding your wood, so put down a towel or tarp for a quicker clean up!
Advertisement
-
Spray your tiles with a household cleaner to remove soap scum and mold spores. To start, liberally spray your tiled wall with a tile-safe household cleaning product, like CLR or Lysol. This will weaken any thicker layers of mold and also remove any oil or soap residue to make cleaning easier. You won’t be able to reach the deeper layers of mold in your wall until these thicker layers of mold and dirt are removed first. [14] X Research source
- While using household cleaners, wear rubber gloves, protective eyewear, a dust mask or respirator, and heavy clothing. Many household cleaners are skin irritants, and you’ll want to avoid coming into contact with them.
-
Scrub the tile with a standard scrub brush and wipe it dry with a rag or towel. You can use a standard scrub brush, or a thicker bristled-brush if you’d like. Scrub aggressively in a circular motion to ensure that you’ve covered every section of your tile at least twice. Wipe away the excess cleaning solution with a dry towel or rag. [15] X Research source
-
Spray your tiles and grout with bleach to remove the stains. You’ll likely have a layer of moldy residue staining the grout between your tiles. Fill an empty spray bottle with bleach and liberally coat the affected area. Let the bleach soak for 10 minutes, and lightly scrub your tile with a scrubbing brush. Wash the tiles with water to remove any excess cleaning material. [16] X Research source
- You can use hydrogen peroxide if you don’t have any bleach. [17] X Research source
- Spot test bleach on any ceramic tile by applying a small amount to a discrete area. Some tiles will be discolored by bleach, so you want to be careful. [18] X Research source
- Reader Poll: We asked 285 wikiHow readers which chemical solution they prefer to use to clean mold, and only 10% of them said 3% hydrogen peroxide. [Take Poll] While peroxide can be effective at removing mold, bleach may work better.
-
Create a baking soda paste if you still have stains. If the bleach and soap were ineffective, fill a large bowl with baking soda. Add a small amount of water and mix it in your bowl to create a thick paste. Apply the paste to the stained area with a toothbrush and scrub. [19] X Research source
- If you still can’t get the mold out, it’s possible that you may have to replace the grout altogether.
-
Rinse the area with cold water and let it air dry. You should wash away any excess cleaning materials by rinsing your tile wall with cold water. You can wash your tile by taking a wet cloth and lightly wiping the entire area. Lay down a towel or tarp to avoid getting your floor wet. Let your wall air dry.
Advertisement
Expert Q&A
Search
-
QuestionHow do you get rid of mold on walls permanently?Raymond Chiu is the Director of Operations for MaidSailors.com, a residential and commercial cleaning service based in New York City that provides home and office cleaning services at affordable prices. He has a Bachelors in Business Administration and Management from Baruch College.A ratio of three parts water to one part bleach is ideal for cleaning mold off your walls. Use a brush to scrub the solution into the affected areas. Be careful not to scrub too hard because you might damage some types of wallpaper and paint. If you can, do a spot test in an inconspicuous area first.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- Always work in a well-ventilated area.Thanks
- Never mix ammonia and bleach. The combination creates toxic fumes.Thanks
- Open as many windows as possible. Bleach is bad for your lungs, and you’ll want to ensure that your room is properly ventilated. [20] X Research sourceThanks
- Contact a professional mold-removal expert if you’re incapable of removing mold on your own.Thanks
Advertisement
Things You’ll Need
Removing Mold from Finished Walls
- Rubber gloves
- Eye goggles
- Long sleeves and pants
- Respirator or dust mask
- Chlorine bleach
- Stiff brush
- Sponge or cloth
Getting Mold off of Wooden Walls
- Rubber gloves
- Eye goggles
- Long sleeves and pants
- Respirator or dust mask
- Vacuum
- Dishwashing detergent
- Bucket
- Soft-bristled scrub brush
- Dishwashing detergent
- Bleach
- Scrub sponge or stiff-bristled brush
- Sandpaper
Removing Mold from Tiles and Grout
- Rubber gloves
- Eye goggles
- Long sleeves and pants
- Respirator or dust mask
- Household cleaner
- Scrubbing brush
- Rag or towel
- Spray bottle
- Bleach or hydrogen peroxide
- Baking soda
- Toothbrush
References
- ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/how-to-remove-mould-and-mildew-from-walls.html#
- ↑ https://extension.umn.edu/moisture-and-mold-indoors/dealing-and-preventing-mold-your-home
- ↑ https://letsremovemold.com/top-3-mold-remover-brushes/
- ↑ https://www.bobvila.com/articles/mold-on-the-walls/
- ↑ https://extension.umn.edu/moisture-and-mold-indoors/dealing-and-preventing-mold-your-home
- ↑ https://www.bobvila.com/articles/mold-on-the-walls/
- ↑ https://www.bobvila.com/articles/how-to-remove-mold-from-wood/
- ↑ https://www.bobvila.com/articles/how-to-remove-mold-from-wood/
- ↑ https://www.bobvila.com/articles/how-to-remove-mold-from-wood/
- ↑ https://extension.umn.edu/moisture-and-mold-indoors/dealing-and-preventing-mold-your-home
- ↑ https://www.bobvila.com/articles/how-to-remove-mold-from-wood/
- ↑ https://www.bobvila.com/articles/how-to-remove-mold-from-wood/
- ↑ https://www.todayshomeowner.com/video/how-to-choose-the-right-sandpaper-grit-for-the-job/
- ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
- ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
- ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
- ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
- ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
- ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
- ↑ https://www.bobvila.com/articles/mold-on-the-walls/
About This Article
Article Summary
X
To get mold off a painted or finished wall, combine 3 parts water and 1 part bleach in a large bucket or basin. Dip a scrub brush with hard bristles in the bleach solution and use it to scrub the wall in circular motions, using firm pressure. Once you’ve cleaned the area, allow the bleach solution to air dry on the wall. It’s best not to wipe the bleach away so that it has more time to work, but you can soak up excess water and bleach with a clean, dry towel if the area is sopping wet. If you still see mold stains on the wall after the bleach dries, repeat the process until the wall looks clean. For more expert advice, like how to get mold off of wooden walls with soap and water, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 48,516 times.
Advertisement
