Download Article
Plus, how to dry and iron satin items
Download Article
Like any luxury material, satin requires special care to maintain its integrity and value. Given that satin alludes to the weave technique, rather than the material within the piece, determining which fibers your item is composed of is crucial in cleaning it without causing damage. To maintain satin’s glossy and smooth texture, see to stains as soon as possible, wash the item in cold water, and lay flat to dry - being sure to keep the item out of direct sunlight and heat.
Cleaning Satin
Handwash satin items by soaking them in cool water and mild detergent. Or, wash them in a washing machine on a gentle cycle. To remove oil stains, blot the spot with a cloth, apply a stain remover, and rinse it with warm water. To remove blood and dirt stains, blot the spot with cool water and dish soap.
Steps
-
Soak the item in cold water. If washing by hand, soak the item in a mixture of cold water and mild detergent for 3-5 minutes. [1] X Research source Work the item through your hands gently, allowing the soap to penetrate the fibers. -
Rinse thoroughly under cool water. Let the water run through the fabric, until the water runs clear; free of suds. Avoid wringing or twisting the material as you rinse it, as this will cause wear and tear on the fabric. [2] X Research sourceAdvertisement -
Use the gentle cycle for machine washing. If your satin consists of more durable fibers such as cotton, polyester, or nylon, you can wash the item in a washing machine. Choose the delicate cycle, add a small amount of mild detergent, and use cold water. Don’t use bleach on satin items. [3] X Research source
Advertisement
-
Lift the oil from the item. Use a clean paper towel and press the stain to lift it away. Alternatively, you can blot the stain with a clean rag, then pour flour or polenta over the stain and allow the flour to absorb the stain for 1 hour. Be sure to brush away any excess flour prior to moving on to the next step. [4] X Research source -
Pre-treat the stain. Spray a pre-treater on the stain, and let sit for 3-4 minutes. If you do not have a pre-treater, you can coat the stain with a heavy-duty detergent.
- Combining powder detergent and water to create a paste is a quick and easy way to create a pre-treater if you don’t have one on hand.
EXPERT TIPIf you're cleaning a satin shoe that's been stained, carefully wash the area with hydrogen peroxide or baking soda.
James Sears leads the customer happiness team at Neatly, a group of cleaning gurus based in Los Angeles and Orange County, California. James is an expert in all things clean and provides transformative experiences by reducing clutter and renewing your home environment. James is a current Trustee Scholar at the University of Southern California.James Sears
Professional CleanerJames Sears
Professional Cleaner -
Wash the item in warm water. Warm water is more effective in lifting grease from the fabric, so can be used in this instance. Otherwise, stick to cold water when washing your satin items.
Advertisement
-
Soak the stain in cold water for 1 hour. Cold water can help break up the stain, thus making it easier to remove. [5] X Research source -
Turn the item inside out. Place the stain face-down, and apply a mild detergent from the inside. This will allow the stain to loosen and push off the fabric, rather than being rubbed deeper into the fabric. [6] X Research source
-
Blot the stain prior to washing. You can be a little more aggressive with more durable fibers like cotton and nylon, but take extra care when blotting satin made up of fibers like silk. [7] X Research source
Advertisement
-
Brush away excess dirt. Use a cloth or a soft bristle brush to gently remove excess debris from the item. This reduces the chance of rubbing more dirt into the fabric during the cleaning process. [8] X Research source -
Apply soap to a damp cloth. Use cold water and a dot of hand soap, then rub the cloth together until a lather forms.
-
Blot the stain. Rubbing stains can cause the fibers to break down more quickly, and will set the stain deeper into the fabric. Blotting gently lifts the stain away without damaging the fabric. Follow the grain of the fabric and repeat the process with a clean section of cloth until the stain is gone. Then, proceed to washing. [9] X Research source
Advertisement
-
Air dry satin items. You should never place delicate satin items in a dryer. The dryer could shrink your item, cause piling, and shorten its lifetime. [10] X Research source -
Roll the item in a clean, dry towel. As you roll, apply light pressure. This will remove excess water while preventing damage caused by wringing or twisting.
-
Lay the item flat on another dry towel. Be patient and allow the item to dry naturally. Placing the item outside is fine, but avoid direct sunlight.
-
Keep the item out of direct sunlight and heat. As the dress dries, and while storing the dress, protect it from direct sunlight and heat. Sun exposure can cause the item to fade, and heat exposure damages the integrity of the dress by breaking down the fibers.
Advertisement
-
Turn the item inside-out. Satin consists of a smooth, glossy side and a dull side. Iron the ‘dull side’ in order to protect the more delicate smooth surface, and prevent creases from forming on the seems. [11] X Research source
-
Place a towel over the item. Because satin is more sensitive to heat and susceptible to damage, taking extra precautions like placing a barrier between the iron and the satin will protect the item. This also prevents drops of water from hitting the fabric, which will cause stains.
-
Iron on the lowest heat setting. Move the iron evenly and quickly across the towel. Do not allow yourself to remain on any section too long, as this will damage the material.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- Read the item’s label. The label reveals what fibers your satin is composed of, and gives laundering instructions based on these fibers. While polyester is the most commonly used fiber in today’s satin production, some satins consist of fibers like silk and acetate. These fibers require special care in the form of dry-cleaning. If your item’s label suggests dry-cleaning, do so.Thanks
Advertisement
References
- ↑ https://www.cleanipedia.com/gb/laundry/how-to-clean-satin-shoes-sheets-clothes
- ↑ https://www.cleanipedia.com/gb/laundry/how-to-clean-satin-shoes-sheets-clothes
- ↑ https://www.yellowpages.ca/tips/sensible-solutions-for-cleaning-satin/
- ↑ https://www.yellowpages.ca/tips/sensible-solutions-for-cleaning-satin/
- ↑ http://www.aftermath.com/content/removing-dried-blood-from-fabric
- ↑ http://www.aftermath.com/content/removing-dried-blood-from-fabric
- ↑ http://www.aftermath.com/content/removing-dried-blood-from-fabric
- ↑ https://www.cleanipedia.com/gb/laundry/how-to-clean-satin-shoes-sheets-clothes
- ↑ https://www.cleanipedia.com/gb/laundry/how-to-clean-satin-shoes-sheets-clothes
About This Article
Article Summary
X
To clean satin, pre-treat stains with a store-bought product, or use a dampened cloth and a tiny amount of hand soap to dab at the stain until a lather forms. Handwash delicate satin by soaking it in cold water and mild detergent for 3-5 minutes, then rinse the fabric with cold water. If your satin is made of durable fibers like cotton or polyester, you can use mild detergent and your washing machine's delicate cycle to clean it. Never wring or twist wet satin, and always lay the item out flat to air-dry. If you want to learn how to remove blood or dirt from your satin, keep reading the article!
Did this summary help you?
Thanks to all authors for creating a page that has been read 109,179 times.
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
