Download Article
Download Article
Silver is a versatile metal with a soft luster that makes for beautiful jewelry. Unfortunately, silver is also pretty fragile compared to many more commonly-used metals, and it can quickly develop tarnish, stains, or scratches. It can also be a bit intimidating to try to clean silver pieces because they are so delicate. However, you don't have to be a professional or use expensive tools to clean your silver yourself.
Steps
-
Pour two cups of hot water into a bowl. You just need enough to cover the jewelry you're cleaning. This method works as a gentle cleanser that removes tarnish without abrading the silver. [1] X Research source If your silver is lightly tarnished, the salt bath should take the tarnish right off.- If you're cleaning a lot of jewelry at once, you can use more water. For just one piece of jewelry, use less water.
- If your jewelry has gemstones, make sure they won't be affected by being submerged in a saltwater solution. This solution is gentle on most stones, but if you're cleaning very fine jewelry with expensive gemstones, you're better off taking it to a professional just in case. You can also contact your jeweler for advice.
-
Add salt and aluminum foil. Stir one tablespoon of salt it into the hot water with a spoon until it completely dissolves. Take a sheet of aluminum foil and tear off a few strips, then put them in the bowl. The combination of salt and aluminum will react with the tarnish on the silver's surface and create a bright, shiny surface in place of the tarnish.- Tarnish happens when the surface of silver combines with sulfur and turns into silver sulfide, which is black. When silver sulfide reacts with aluminum in a salt solution, the chemical reaction between the substances turns the silver sulfide back to silver. The reaction happens faster when the solution is warm. [2] X Research source
- If you don't have table salt on hand, you can use baking soda instead. It has the right properties to facilitate the same chemical reaction.
Advertisement -
Submerge your jewelry in the solution. Allow it to sit for 5 minutes. Stir it around a bit to see whether the tarnish is going away. When you see that the silver's shine has been restored, remove the silver from the solution. [3] X Research source
- If you're working with deeply tarnished silver, you might need to repeat the process two or more times. Make sure the solution is completely heated, since the reaction is much slower if the solution is cool.
-
Rinse the jewelry. Run it under cool running water to rinse off the salt, then gently dry it using a soft cloth or microfiber towel. The jewelry should be good as new. If you still see signs of tarnish, repeat the process until it looks clean.
Advertisement
-
Purchase a silver polish. When tarnish develops on silver, a simple salt and aluminum bath may not suffice to remove it. Specially formulated silver jewelry polishes are your safest option for polishing silver jewelry, especially if you are dealing with an antique or a piece that has intricate designs etched into it. [4] X Research source- Even special polishes can remove a layer of silver, so get a professional cleaning if you're dealing with a delicate piece. [5]
X
Expert Source
Kennon Young
Certified Jeweler Expert Interview. 11 September 2019. - Instead of buying silver polish from the drugstore, consider getting it from a jewelry store or a store with a high-quality jewelry department. [6]
X
Expert Source
Kennon Young
Certified Jeweler Expert Interview. 11 September 2019. - Check out more silver cleaning tips from wikiHow users on wikiHow’s “Hacks for how to clean silver at home?” forum .
- Even special polishes can remove a layer of silver, so get a professional cleaning if you're dealing with a delicate piece. [5]
X
Expert Source
Kennon Young
-
Rub the jewelry with a little polish. Moisten a soft silver-polishing cloth or the sponge included with the silver polish and take a little bit of polish onto the cloth. Rub the polish into the silver jewelry gently. Use only a straight-line, back-and-forth motion. Avoid scrubbing or rubbing in circles, since this can leave scratches or patterns in the surface of the jewelry. Just let the polish do the job.
-
Rinse and dry the silver jewelry. Rinse it under cool running water. Be sure to clean off all of the polish residue so it won't continue working on the surface of the jewelry. Dry it completely using a soft cloth.
-
Consider using common household products for less rare or less valuable pieces. They will usually work to remove tough tarnish, but may cause damage such as pock marks or scratches. Try them at your own risk.- Try toothpaste. Select a plain white toothpaste without the special whitening options. Take a soft, dampened cloth or a damp sponge and put some toothpaste on it. Gently rub over the silver jewelry in straight, back-and-forth motions. Be very gentle, and if you notice scratching at any point, stop and rinse the toothpaste off. As the cloth or sponge becomes dark with tarnish, add more toothpaste to a clean part of the dampened cloth/sponge and continue gently polishing. Rinse thoroughly with warm water and dry with a soft towel.
- Baking soda may remove stubborn tarnish, but don't use it unless you don't mind the risk of damaging the silver. Make a paste of baking soda and warm water, gently rub it into the surface of the jewelry, and rinse when the tarnish is removed. [7]
X
Expert Source
Alicia Sokolowski
Green Cleaning Specialist Expert Interview. 15 September 2020.
-
Try a silver dip. Commercial silver "dips" can dissolve stains without rubbing the silver jewelry, although they may take off a layer of silver. For this reason, they should only be used as a last resort. Contrary to what the word "dip" implies, professionals rarely actually soak silver in these products, at least not for long. Dips are generally harsh, potentially dangerous chemicals, so follow the directions carefully and consult a professional when in doubt.
Advertisement
-
Clean it often. Clean your silver jewelry often, and clean it promptly after use. Silver jewelry that is frequently used rarely has tarnish problems. When tarnish is not yet present, or when it's just beginning to develop, simply wash your silver jewelry in warm (not hot) water with a gentle, phosphate-free detergent.- Prompt cleaning is especially important when the silver jewelry has been exposed to certain foods containing sulfur, or those which are acidic or salty. In particular, common foods such as table salt, eggs, some fruits, onions, mayonnaise, and vinegar are harmful to silver.
- In any case, wash your silver jewelry right away or at least rinse it well with warm water, and don't leave silver sitting in dishwater that may contain traces of these foods.
-
Wash it separately. It's a good idea to wash silver separately from your other silver pieces, like bowls or silverware, because metal sinks and utensils can scratch silver jewelry.- You should also avoid using rubber gloves when washing silver, as rubber corrodes silver jewelry.
- Stainless steel can also damage the finish if it comes into contact with your silver jewelry, so avoid putting it in the sink; use a bowl to wash it in instead.
-
Dry it with a polishing cloth. Use a special polishing cloth or simply a soft, lint-free cloth to gently rub the silver clean after washing. Make sure it gets completely dry.
- Silver can be so soft that even using a scratchy, rough towel could be enough to make indentations in its surface. Make sure to use a soft cloth.
- As you dry the jewelry, gently buff the shine back with a soft cotton cloth.
-
Store your silver jewelry correctly. Beyond prompt and frequent cleaning, the best way to preserve your silver is to store it correctly. Make sure each piece is completely dry before storing it. You can buy special bags for storing silver jewelry that prevent them from getting tarnished. If you don't have the bags, use this technique:- Wrap each piece of silverware in acid-free tissue paper or anti-tarnish paper. You can also wrap pieces in flannel.
- Store the silver in a compartment separate from the rest of your jewelry. Never store silver jewelry where it can contact rubber, stainless steel, or paint.
Advertisement
Join the Discussion...
I was recently gifted a family heirloom from an aunt of mine. It’s this really old sterling silver necklace and it’s cute, but it’s kind of... Read More
Start by making a paste with baking soda and hot water. Maintain a 3:1 proportion of baking soda to water. So, for example, you’d mix 9 ounces... Read More
Try lining a baking dish with aluminum foil and fill it with boiling water and a tablespoon of salt. If you set your silver in the water and move... Read More
Expert Q&A
Search
-
QuestionWhat can I use to reach small grooves and details?Alicia Sokolowski is a Green Cleaning Specialist and the President and co-CEO of AspenClean, a green cleaning company in Vancouver, British Columbia. With over 2 decades of experience, Alicia specializes in creating a healthier, green alternative to chemical-based cleaning products and services. AspenClean develops and manufactures its own line of 100% Natural, EcoCert® certified, and EWG verified™ cleaning products. AspenClean’s glass cleaner was voted Parent’s Green Pick 2020 by readers of the Parents’ magazine. Alicia holds a CPA designation and a Bachelor’s degree in Commerce and Finance from the University of Toronto.Regardless of the cleaning solution that you're using, you can always use a clean toothbrush to get into hard-to-reach details and clean them out.
-
QuestionWhat is the best way to clean silver jewelry?Kennon Young is a Master Gemologist Appraiser and the Owner of Vermont Gemological Laboratory in Burlington, Vermont. With over 20 years of experience in the industry, Kennon and his team specialize in handmade engagement rings, wedding bands, and custom jewelry. He attended the Revere Academy of Jewelry Arts, the Gemological Institute of America, and the Rhode Island School of Design Extension. He is a Jewelers of America (JA) Certified Bench Jeweler Technician and received the highest credential in the jewelry appraisal industry, the ASA Master Gemologist Appraiser, in 2016.Silver is actually fairly hard to clean and should most likely be taken to an expert. Silver needs a cleaner that includes a light sulfuric acid, however, some of those acids are damaging to organic materials that can be found in certain silver flatware and jewelry. Consider consulting a professional.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Reader Videos
Submit a Video Tip!
Share a quick video tip and help bring articles to life with your friendly advice. Your insights could make a real difference and help millions of people!
Submit a Video
Coming Soon!
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- This will remove any tarnish, even the antique-y ones. Dispose of salt water down the drain after cooling. This is a simple reaction between the aluminum metal and the silver sulfide. The table salt acts as an electrolyte to allow the reaction to happen.Thanks
Advertisement
References
- ↑ http://jewelrymakingjournal.com/clean-tarnished-silver-jewelry/
- ↑ http://www.scifun.org/HomeExpts/tarnish.html
- ↑ https://www.howtocleanstuff.net/how-to-clean-silver-jewelry/
- ↑ http://www.radcliffejewelers.com/resource-center/education/jewelry/jewelry-cleaning-guidelines
- ↑ Kennon Young. Certified Jeweler. Expert Interview. 11 September 2019.
- ↑ Kennon Young. Certified Jeweler. Expert Interview. 11 September 2019.
- ↑ Alicia Sokolowski. Green Cleaning Specialist. Expert Interview. 15 September 2020.
About This Article
Article Summary
X
If your silver jewelry has become tarnished and you want to clean it, combine 2 cups of hot water and 1 tablespoon of salt in a small bowl and stir it until the salt has dissolved. Then, put a few strips of aluminum foil in the bottom of the bowl and place your jewelry on top of them. Wait for 5 minutes before removing the jewelry and rinsing it with cold water. After you've rinsed off your jewelry, dry it off with a soft cloth or clean it again if all of the tarnish hasn't come off yet. If you want to learn more, like how to deep clean your silver with polish, keep reading the article!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,587,385 times.
Reader Success Stories
- "I have dangly silver earrings that were badly tarnished. Each earring had nine individual hanging pieces. I knew there was a soaking method using aluminum foil, but didn't know the particulars. Thank you. This method worked perfectly. " ..." more
Advertisement
89%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I have dangly silver earrings that were badly tarnished. Each earring had nine individual hanging pieces. I knew there was a soaking method using aluminum foil, but didn't know the particulars. Thank you. This method worked perfectly. "
..."
more
"I had a beautiful necklace I had purchased in New Mexico 2 years ago. It had tarnished over time. It wasn't terribly expensive, but not a cheapie, either. I used the baking soda idea, and it worked beautifully. I am wearing it now as I type this. "
..."
more
"Accidentally wore my heirloom silver jewelry in a chlorinated pool and the jewelry turned dark. I tried this salt/aluminum method and after 2 soakings, it came out sparkly shiny! Thank you."
..."
more
"Until I reviewed the information on this site, I thought a few of my silver bullet bars were fake. Now, I feel so much better knowing the black on my silver is tarnish. Thank you!"
..."
more
"Bought silver chain, for some reason parts of the chain were turning black. Put chain in aluminum foil, added some salt and it worked perfectly."
..."
more
