PDF download Download Article PDF download Download Article

Cleaning a fiberglass shower floor can breathe new life into your bathroom. The key to a sparkling shower floor is cleaning it regularly with a nonabrasive cleaner. If you need to get rid of tough stains, you can use baking soda, vinegar, or hydrogen peroxide.

Method 1
Method 1 of 3:

Doing Routine Cleaning

PDF download Download Article
  1. If you have a fiberglass shower or tub, it is important that you only use nonabrasive cleaners, as abrasive cleaners can scratch the surface. Try using a dish washing liquid, liquid laundry detergent, all-purpose cleaner, or a soft scrub product. [1]
    • Avoid abrasive cleaners like scouring powder or ammonia.
  2. You should only use cleaning tools that are not abrasive. Opt for a sponge, brush, or cloth that is made from polyethylene, polyester, or nylon.
    • Avoid abrasive cleaning tools like steel wool or scrapers.
    Advertisement
  3. You do not want to scratch or dull the surface of the fiberglass. Apply the nonabrasive cleaner with a fiberglass friendly sponge, brush, or cloth and gently rub the surface. Keep in mind that some grime may need to be treated with a stronger cleaner in order to remove it. [2]
  4. Once you finish cleaning the shower floor, rinse the surface with water. Finally, use a soft cloth to dry the entire surface of the shower floor.
  5. Advertisement
Method 2
Method 2 of 3:

Removing Tough Stains

PDF download Download Article
  1. Mix a small amount of water with baking soda until a paste forms. Then spread the paste over the surface of the problem area. Leave the paste on for several hours. Rinse off with warm water. [3]
  2. Vinegar is strong enough to remove tough soap scum stains and hard water deposits. Pour vinegar over the problem area. Allow to sit for several minutes. Then use a fiberglass friendly sponge or brush to scrub the stain. [4]
  3. Place several layers of white cloth over the stain, and then completely saturate the cloth with hydrogen peroxide. Leave the material on the stains overnight, rinse with water, and then dry completely. [5]
  4. If the floor of your fiberglass shower is home to tough mildew stains, you can remove them with chlorine bleach. Apply a small amount to the stain. Allow the bleach to penetrate the stain for several minutes. If necessary, use a nonabrasive brush or cloth to scrub the stain. Rinse the shower floor with clean water. [6]
  5. 5
    Use oxalic acid for tough stains. Follow the directions on the product to prepare the oxalic acid. Then, apply the oxalic acid to the stain and allow it to sit for 10-15 minutes. Rinse it away according to the product instructions. [7]
    • Oxalic acid can harm your skin, so wear protective gloves when using it. It's also a good idea to wear eye protection.
  6. Advertisement
Method 3
Method 3 of 3:

Maintaining Your Shower Floor

PDF download Download Article
  1. Soap scum and hard water deposits will have a harder time building up if you clean your shower regularly. Regular cleaning can also help prevent the use of stronger cleaning products to remove tough stains.
  2. If you notice a stain on your fiberglass shower floor, you should remove it as soon as you can. Removing tough stains and mildew as they appear will help you maintain the shower floor and avoid time-consuming deep cleanings.
  3. If your fiberglass shower floor is extremely dull or contains a lot of scratches, you can try to restore it with white automobile polish. After cleaning and drying the floor, apply an automotive white polishing compound to the floor. Buff off with a clean cloth.
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can I mix vinegar and Dawn and wash my fiberglass shower floor?
    Community Answer
    Yes! I use a spray bottle of vinegar and water (about 1/2 and 1/2) with a small squirt of dish soap. When cleaned regularly, this is great for hard water deposits and soap scum. If there's a thick layer of scum on there, you might need a stronger solution - straight vinegar and a little dish soap. I personally use a small scrub brush.
  • Question
    How do you clean hair dye and rust stains from a pebble floor shower?
    Free Eagle
    Community Answer
    Take a solution of 1 part muriatic acid (available at hardware stores) and 5 parts water. Brush the solution into the grout and go over the stones with a brush. When stain is out, rinse and let dry. After the stones are dry, seal the stones and grout with tile sealer (you can get at a hardware store). This will prevent future stains. You will need to treat with tile sealer about every 3 - 5 years. Be sure to use rubber gloves and safety glasses when using the acid solution.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Article Summary X

      To clean a fiberglass shower floor, scrub it gently with a few drops of dish soap squeezed onto a sponge. Afterwards, rinse with warm water and dry with a soft cloth. For tough stains like soap scum, spread a paste of water and baking soda over the stain, and let it sit for a few hours before rinsing with warm water. Alternatively, pour white vinegar over the area, then scrub it clean after letting the vinegar sit for several minutes. If persistent mildew is the problem, apply a small amount of bleach and scrub the floor with a cloth or soft bristle brush. For more tips, like how to restore dull or scratched fiberglass shower floors, keep reading.

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 113,140 times.

      Did this article help you?

      Advertisement