Download Article
Download Article
Seagrass rugs are natural rugs made from sustainable grass grown in seawater. These rugs are biodegradable but durable inside your home due to being resistant to grime and stain. Still, regular vacuuming and immediate stain treatment will extend the life of your rug. Seagrass rugs give off water, so they need to be treated delicately. To clean your rug, vacuum up dirt regularly, spot treat spills with a neutral dish soap, and blot up and heat dry excess moisture before it sets into the rug.
Steps
-
Vacuum the rug regularly. Natural rugs must not be washed regularly, since they absorb moisture. Instead, vacuum the rug a few times per week using a suction brush. Pass over it several times, moving in a different direction each time to help dislodge the dirt. [1] X Research source
- Do this before treating spots and a few times per week to keep your rug clean.
-
Scrape up solid spillage. This should only be done for food, makeup, chalk, soot, and other substances too solid to be blotted. Use a dull knife or nail file. Hold the knife flat against the rug and use it to scrape up the substance without spreading it.Advertisement
-
Blot liquid spills with a paper towel. Any food or liquid spills need to be absorbed immediately using a paper towel or undyed cloth. Dab the area with the towels to remove as much of the liquid as possible. [2] X Research source
-
Mix detergent and water. In a small bowl, add a small amount of a neutral dish detergent, such as Dawn, to an equal amount of lukewarm water. Stir the mixture until it is soapy. [3] X Research source
- Avoid using laundry soap and other cleaners, as these can change the rug’s color.
- Another option for cleaning seagrass rugs is commercial cleaner such as HOST Dry Cleaner. Follow the directions on the label to treat the spill.
-
Sponge the cleaner onto the stain. Dip a sponge or a brush into the detergent mixture. Apply small amounts of the cleaner onto the outside of the stain, working towards the center. This will help get rid of food, drink, and pet stains.
- Dissolvers such as Tetra and petroleum solvent for oil and acetone polish remover for nail polish can be substituted to combat specific stains. Apply sparingly the same way you would detergent.
-
Blot the rug with a paper towel. Again, only use paper towels or undyed cloths to avoid staining the rug. Use these to remove excess moisture before it gets absorbed into the rug.
-
Repeat stain cleaning. When the stain persists, you may still be able to remove it. Add more of your cleaner and apply it the same way you did before. Follow it up by blotting off the excess using paper towels or undyed cloth. Do this a few times.
-
Dry the rug quickly. Once the stain is treated, remove the moisture before the rug absorbs it. Apply a heat source, such as that from a hair dryer. Focus heat onto the wet area and dry it quickly.
-
Use spray-extraction for deep cleaning. As a last resort for a soiled rug, find a machine that has a spray-extraction setting. Set the machine to the lowest moisture setting. In this method, the machine applies liquid cleaner and then quickly removes it.
Advertisement
-
Blot the urine. Quickly apply paper towels or white, undyed cloth on top of the spill. Pick up as much moisture off the rug as possible.
-
Mix ammonia and water. In a bowl, combine 4 fl oz (120 mL) of water and 0.5 fl oz (15 mL) of ammonia. Stir the mixture as thoroughly as possible. [4] X Research source
-
Dab the solution onto the stain. Use an undyed white cloth or paper towel. Dip the cloth into the ammonia solution, wringing out excess moisture before patting the stain with the cloth. Cover the area with as little cleaner as possible to avoid damaging the rug.
-
Wash the area with a damp towel. Get a clean, undyed cloth or paper towel. Dip it in clean water, not the cleaning solution. Wring out the cloth to remove excess moisture, then blot the ammonia-treated area to pick up any ammonia left on the rug.
-
Mix vinegar and water. In a clean bowl, add 2 fl oz (59 mL) white vinegar to 2 fl oz (59 mL) water. Stir the mixture thoroughly. The vinegar solution will remove the smell of urine. Vinegar is for removing the smell of urine, so it is only necessary when the scent lingers after normal spot cleaning. [5] X Research source
-
Apply the solution to the rug. Use another dry, undyed cloth or paper towel. Dip it into the solution, and wring out excess moisture. Then, pat the stained area with the cloth or paper towel.
-
Wash the treated area again. Only use a clean, undyed cloth or paper towel. Dip it into clean water, then wring out the excess moisture and dab it onto the treated area. This will remove the vinegar on the rug.
-
Dry the wet areas. Once the ammonia or vinegar is washed from the rug, blot the treated areas on the rug with a paper towel or undyed cloth. To dry the rug quickly, use a hair dryer.
Advertisement
-
Mix water and bleach. Add a cup of chlorine bleach to a bowl. Dilute the bleach with 48 fl oz (1,400 mL) of water. Stir the mixture thoroughly to minimize the rug’s exposure to the bleach. [6] X Research source
-
Pour the mixture into a spray bottle. Since adding too much bleach to the rug can discolor it, do not apply it directly. Instead, get a spray bottle from the store. Pour the bleach into the bottle and mist a thin coating on the moldy areas.
-
Spray the mixture over the rug. Spray as lightly as possible, covering the rug in an even coating. Do this only on the rug itself, not the binding. You may want to test the spray in a single area first to see if it discolors the rug. If it does, add more water to the mixture.
-
Blot the rug after 10 minutes. Allow the bleach mixture to work on the mold for 10 minutes. When the time is up, take paper towels and blot the rug to remove moisture. Make sure you blot up as much of the bleach as possible.
-
Dry the rug. Allow the rug to air dry, or dry it quickly using a hair dryer. This ensures that none of the moisture or bleach soaks into the rug, minimizing damage from treatment.
Advertisement
Expert Q&A
Search
-
QuestionI have a rust stain on my seagrass carpet. How do I get rid of it?Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.First, use a butter knife to scrape away any visible rust. Then, use dish soap and water to blot the stain. Let the solution sit for a few minutes prior to blotting it up with a wet rag. If the stain is still present, you can repeat the process with 2 cups of warm water mixed with 1 tablespoon of ammonia.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- In dry climates and low humidity areas, a very light coating of water can extend the life of the rug. First, make sure all the dirt is vacuumed, then spray a very fine coating of water evenly over the rug. You may also sprinkle the water, use a clean mop, or a brush dipped in water.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You’ll Need
- Several undyed white cloths
- Paper towels
- Neutral detergent for most stains
- Ammonia for urine stains
- White vinegar for urine odors
- Chlorine bleach for mold
- Spray bottle
References
- ↑ https://www.sisalrugs.com/how-to-clean-seagrass-rugs
- ↑ https://www.sisalrugs.com/how-to-clean-seagrass-rugs
- ↑ https://www.rugs-direct.com/cleaninginfo/
- ↑ https://www.ebay.com/gds/How-to-Clean-a-Seagrass-Rug-/10000000206362986/g.html
- ↑ https://www.sisalrugs.com/how-to-clean-seagrass-rugs
- ↑ http://www.ebay.com/gds/How-to-Clean-a-Seagrass-Rug-/10000000206362986/g.html
About This Article
Article Summary
X
To clean spills on your seagrass rug, blot the liquid with a paper towel or undyed cloth. Next, prepare a solution of equal parts water and mild dish soap. Sponge the cleaner onto the stain, starting from the outside of the stain and working towards the center. Then, blot the rug with a paper towel and repeat the sponging process again. After sponging and blotting the stain a few times, dry the area quickly with a hair dryer or another heat source. For more advice, including how to use ammonia or vinegar to remove pet stains from your seagrass rug, keep reading.
Did this summary help you?
Thanks to all authors for creating a page that has been read 42,619 times.
Advertisement
82%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
