Download Article
An easy-to-follow guide to using your Switch on TV without the Dock
Download Article
Did you forget to bring your Dock with you and you want to play hooked up to a TV? Luckily for you, there is a way that you can connect your Switch to a TV without the Dock. This wikiHow article shows you how to use your Switch with a TV without a Dock.
Things You Should Know
- Use an HDMI adapter instead of a Dock to be able to play your Switch on your TV!
- Plug the USB-C cables and HDMI into the adapter, then plug the HDMI into your TV.
- Perfect wireless streaming isn't something you can do yet, but you can purchase dongles that enable you to stream without cables at the cost of low FPS and high latency.
Steps
Section 1 of 3:
USB-C to HDMI Adapter
-
Purchase a USB-C to HDMI adapter. Not every HDMI adapter is suitable for your Switch. The two most reliable adapters are the RREAKA USB Type C to HDMI Digital AV Multiport Hub and the Switch HDMI Adapter Hub Dock. [1] X Research source
- This adapter must have a USB-C power input, HDMI output, and USB-C connector to attach to the Switch. With a USB-C power input, you can connect your Switch to a charger you don't drain your battery while docked!
-
Connect the USB-C and HDMI cables to the ports on your adapter. You can either use the original cables that are attached to your Dock, or you can purchase new ones. [2] X Research source
- Fortunately, USB-C and HDMI cables run pretty cheap and are available at almost any retailer.
Advertisement -
Connect the adapter's USB-C cable to your Switch. That should be the USB-C cable that came with the adapter. [3] X Research source
-
Connect the HDMI cable to your TV. This cable is on the other end of the adapter. [4] X Research source
-
Prop your Switch up so it's not lying flat. Letting it lie flat will block the air vents that prevent it from overheating.
- You could use a book to prop your Switch up from the desk. The air vents are on the bottom, so you can even hang it off the side of a table.
-
Turn on your TV and Switch. You'll need to select the appropriate HDMI input to see your Switch on the screen . [5] X Research source
- Your Switch should charge while it's connected like this! If your adapter has a USB 2 or 3 port, you might be able to plug in a controller .
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://www.alphr.com/connect-switch-to-tv-without-dock/
- ↑ https://www.tcl.com/global/en/blog/tips/how-to-connect-your-nintendo-switch-to-your-tv
- ↑ https://www.tcl.com/global/en/blog/tips/how-to-connect-your-nintendo-switch-to-your-tv
- ↑ https://www.tcl.com/global/en/blog/tips/how-to-connect-your-nintendo-switch-to-your-tv
- ↑ https://www.tcl.com/global/en/blog/tips/how-to-connect-your-nintendo-switch-to-your-tv
- ↑ https://www.alphr.com/connect-switch-to-tv-without-dock/
- ↑ https://www.alphr.com/connect-switch-to-tv-without-dock/
About This Article
Thanks to all authors for creating a page that has been read 149,093 times.
Advertisement