PDF download Download Article PDF download Download Article

A scalloped border is a wavy edge that goes around the outside of an item. Scalloped borders add interest to crocheted and knit items, such as blankets, scarves, and hats. It is easy to add a scalloped border whether you are a beginner or expert knitter, so try adding one to a knit or crocheted item for a little extra flair!

Part 1
Part 1 of 3:

Choosing Yarn and Beginning the Border

PDF download Download Article
  1. You can add a border onto a knit or crocheted item that is the same color as the item or that is a different color. Consider how much you want the border to stand out and what color would work best with the item. [1]
    • For example, if you will be adding a border onto a baby blue blanket, then you may choose a baby blue yarn in the same shade, or opt for something that will contrast with the blanket, such as pale yellow, mint green, or white.
  2. For best results, make sure that the yarn is the same weight as the yarn that was used to knit or crochet the item. You can find the yarn weight listed on the package of the yarn, or just compare a strand of the yarn in your item with a strand in the yarn you'd like to use and see if they are roughly the same diameter. [2]
    • For example, if the item is made from medium-weight yarn, then use a medium-weight yarn for the border.
    Advertisement
  3. Check your yarn’s label for a crochet hook size recommendation, or look it up online if you are unsure. Using the correct size hook for the yarn you have selected will help to ensure that you get the best results. [3]
    • For example, if you are using a medium-weight yarn to create a scalloped border, then the recommended size may be a US size I-9 (5.5 mm).
  4. Slipstitch into the edge of the item. Identify where you want to work the first stitch on the border of your item. Then, make a slipknot and slide it onto your hook. Insert the end of the hook into the stitch where you want the border to begin. Then, loop the yarn over the end of the hook and pull it through both loops to anchor the yarn to your item. [4]
    • If you plan to go all the way around the item, then you can start anywhere along the border.
    • If you only plan to add a border to part of the item, decide where you want the border to begin and end.

    Have a boring sweater you want to upgrade? Scalloped borders also look great on sleeves, necklines, and along the bottom hem.

  5. Advertisement
Part 2
Part 2 of 3:

Working a Basic Scallop Stitch

PDF download Download Article
  1. Chain 1 to provide slack for the first stitch. Loop the yarn over the hook and pull this yarn through the loop to create 1 chain. [5] This will make it easier to work a scallop without making the item look puckered. [6]
    • Repeat this before each new scallop.
  2. Skip 2 stitches and double crochet 5 times into the same stitch. Do not work stitches into the first 2 stitches next to where you anchored the yarn. Go to the third stitch and then loop the yarn over the end of the hook 1 time. Insert the hook into the stitch, and yarn over again. Pull through 1, and then yarn over the hook again. Pull through 2, then yarn over again and pull through the last 2. [7]
    • Repeat the double crochet stitch 4 more times into the same space. [8]
  3. After you complete the fifth double crochet stitch, skip the next 2 stitches. Then, work a slipstitch into the third stitch from where you worked the 5 double crochet stitches. [9]

    Tip : If you want help keeping track of your stitches, download a stitch counting app. Then, simply tap the screen of your phone after you complete each stitch to help you keep track of what you have done so far.

  4. Chain 1, skip 2 stitches, and then double crochet 5 times into the third stitch. Then, skip 2 stitches and slipstitch into the third stitch. Repeat this sequence to keep adding scallops onto the edges of your project. [10]
    • You can create as many scallops as you like using this sequence.
  5. Advertisement
Part 3
Part 3 of 3:

Finishing the Border

PDF download Download Article
  1. Keep working until you have covered the desired section of your item. Then, work a slipstitch into the space between your first and last stitches if you are doing a full border, or after the last stitch if you are doing a partial border. [11]
    • If you are doing a full border, do your best to position the last scallop and slipstitch so that the ends will be as evenly spaced as the rest of the item. However, don’t worry if you are 1 or 2 stitches off. It will not be noticeable.
  2. Use a sharp pair of scissors to cut the end of the yarn at this distance. It’s okay to estimate this length. It does not need to be exact. You just need enough yarn to easily pull the end through your last stitch. [12]
  3. Wrap the strand around the hook 1 time and then pull the end of the strand through the loop that is on the crochet hook. Bring the end of the strand all the way through the loop and tug the end until it is a tight knot. [13]
    • This will secure the end of your border.
  4. You will have a tail at the beginning of your border and at the end of it. Cut each of these strands of yarn about 0.25 to 0.5 in (0.64 to 1.27 cm) from the last stitch. Do not cut the ends of your yarn any shorter than this or they may unravel. [14]
    • Your border is complete after you cut the ends!

    Want to try a different type of border stitch?

    Go with a slipstitch or single crochet stitch for a simple border.

    Try the double crochet or triple crochet to add width.

    Opt for the shell stitch or petal cone edging for something fancy.

  5. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    Should I add tall stitches to crochet a scalloped edging?
    Katarzyna Kapuścińska
    Crochet Expert
    Katarzyna Kapuścińska is a Crochet Expert based in Gdynia, Poland. She is an adept craftswoman specializing in textile-related projects, and has worked as a textile pattern designer, crochet pattern designer and handicraft educator. She is the primary editor of crochetpedia.com, an online crochet hub featuring crochet patterns, crochet stitches, video tutorials, and more. Crochetpedia is a place for all makers, where users hone their skills, learn new crochet techniques, and expand their knowledge base. She is also a frequent contributor to YourCrochet.com, an online center for free, easy crochet and knitting patterns for all skill levels.
    Crochet Expert
    Expert Answer
    Yes, adding tall stitches, such as double crochets or treble crochets, is an easy and common way to provide a scalloped edging in your crochets. These tall stitches create the peaks of the scallops. Make sure to count your stitches to ensure that your scallops are even and keep the pattern constant when repeating your stitch.
  • Question
    How do I put the edge on a cloth item?
    T. Chinsen
    Top Answerer
    Attach an edge by simply sewing it onto the fabric. Other options: blanket stitch the fabric, then crochet into the stitches. If possible, crochet directly into the fabric if using fine cotton. Knit fabrics have a stretch factor and will be more forgiving with any unevenness. Woven fabrics will amplify any errors or any uneven edges. With a yarn edging, use matching thread to attach it. Trying to sew with 4-ply thickness can create a bulky seam. Split a 4-ply strand and use 2 strands to sew and twist as you sew to strengthen the thread.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Things You’ll Need

      • Yarn
      • Crochet hook
      • Scissors

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about crochet, check out our in-depth interview with Katarzyna Kapuścińska .

      About This Article

      Thanks to all authors for creating a page that has been read 35,408 times.

      Did this article help you?

      Advertisement