How to Cut Mattress Foam

PDF download Download Article
PDF download Download Article

Mattress foam is comfy, breathable, and versatile, making it a popular bedding choice. If you’re interested in cutting mattress foam—whether you’re downsizing your bed, designing a custom mattress for a campervan, or splitting a king-size piece of foam into multiple mattresses—the process is fast and simple. All you need is a sharp knife and a few basic tools.

Part 1
Part 1 of 3:

Measuring and Marking the Mattress Foam

PDF download Download Article
  1. Most mattress foam comes with an outer covering that protects the foam inside. To remove it, simply unzip the cover and pull it off. If there’s additional lining underneath the zip cover, use a pair of scissors to cut and remove it. Be careful as you’re cutting so you don’t cut into the mattress foam with the scissors. [1]
    • You can dispose of the zip cover and any lining after you take it off since it won’t fit your mattress foam anymore once you cut it, or you can try altering and sewing it so you can reuse it.
    • If you toss out the old zip cover, you may need to buy a new one depending on what you’ll be using the mattress foam for.
  2. If you want to cut your mattress foam in half, measure from one side of the foam to the other and then divide that number in half to figure out where you’ll want to make the cut. If you know how wide or long you want the piece of foam you’re cutting to be, measure that distance with the measuring tape and use a marker to mark the mattress at that point so you can reference it later.
    • Try not to press down on the foam while you're measuring it so you don't distort the size and shape.
    • Measure 2 or 3 times so you know that your measurement is accurate.
    Advertisement
  3. Take a long ruler or straight edge and line it up with the point you measured on the mattress. Then, carefully draw a straight line along the edge of the ruler with a marker. Depending on the shape and size of the piece you want to cut, you may need to draw multiple lines.
    • Make sure the straight edge or ruler isn’t slanted before drawing your line by measuring the distance from both ends of the tool to the edge of the mattress. If the distance isn’t the same from both ends, the straight edge or ruler is slanted.
    • If you’re cutting the mattress foam to fit a smaller bed frame, you’ll want to draw a straight line from one short end of the foam to the other.
    • If you’re not cutting a straight line, you can draw the curve you want to cut on a large piece of paper, cut it out, and then trace the curve onto the mattress foam with marker. You can freehand the curve on the paper, or you can trace the curved object you’ll be using the mattress foam for.
  4. Since you’ll be cutting through the foam with a knife, you don’t want the line to be on a solid surface or you could end up chipping and scratching it. Rest the foam on a stable, elevated surface so that the space directly under the marked line is open. [2]
    • For example, you could rest the mattress foam on a table so that the marked line is hanging off the edge.
    • If you’re cutting a large mattress foam in half, try resting it on 2 box springs that have some space in between them. That way, the line down the center of the foam will sit right over the open space.
    5. Advertisement
Part 2
Part 2 of 3:

Cutting the Foam with a Knife

PDF download Download Article
  1. Electric carving knives are usually used to slice through food, but you can also use one to easily cut your mattress foam. Because the serrated edges of the knife saw back and forth when it’s plugged in, you can get a cleaner, straighter edge with it.
    • If you don’t have an electric carving knife but you’d like to use one to cut your mattress foam, you can find one online or at your local department store.
  2. Although the cut may not be as clean and straight as it would be with an electric carving knife, a kitchen knife will also do the trick. Especially if you plan on putting a new cover over your cut piece of mattress foam that will hide the edge, a kitchen knife is an easy, cheap option.
    • If you decide to use a kitchen knife, try to use one that has serrated edges if possible.
    • The longer the blade, the easier it will be to cut through your mattress foam.
    • If you don't have a kitchen knife that will work, you may be able to use a pair of heavy-duty scissors if the mattress foam you're cutting is 1 ⁄ 8 inch (0.32 cm) or less thick. Just keep in mind that the cut may not be as clean as if you were using a knife. [3]
  3. This will make it easier to cut deep into the mattress foam. Position the knife so the sharp edge of the blade is lined up with the line you marked on the foam.
  4. If you’re using an electric carving knife, you may not need to move the knife up and down since it will be moving on its own. Once you reach the end of the line, pull out the knife and separate the piece of foam or continue with the next marked line.
    • Go slowly and make sure you’re following along with the line so your edge is as straight as possible.
    • If you’re using scissors, cut along the line you marked like you would if you were cutting fabric or paper.
  5. If you’re using a knife with a short blade, it may not cut all the way through your mattress foam. If that’s the case, flip the foam over and measure and mark another line on the opposite side. Then, cut through that line the same way you did on the other side so that the foam separates into 2 pieces.
    • Make sure you measure carefully so the lines on each side of the foam match up.
    6. Advertisement
Part 3
Part 3 of 3:

Finishing up

PDF download Download Article
  1. Measure from the newly cut edge to the opposite side of your mattress foam. If it’s the right size, you’re all set! If it’s not, you can always repeat the process and cut off a little more foam if necessary.
    • Unfortunately, if your measurement is too short, you won’t be able to add any foam back on. However, if you’ll be covering your mattress foam with a zip cover, you could try cutting a strip of foam that makes up the difference and placing it next to the larger piece inside the cover.
  2. While some minor jagged edges won’t make much of a difference if you’re going to be putting a cover on your mattress foam, you may want to fix them if your foam is going to be exposed. To smooth out the edges, take a kitchen knife and carefully cut off any jagged pieces that are sticking out so the cut is nice and straight.
    • Don’t cut off too much of the foam or you might end up altering the size of it.
  3. If you don’t want to alter or sew the old zip cover to fit your cut mattress foam, you can order a custom mattress cover online using the dimensions of your foam. Once you have a cover, simply unzip it all the way, place your mattress foam inside, and zip the cover up again.
    4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You’ll Need

      • Scissors
      • Measuring tape
      • Marker
      • Kitchen knife or electric carving knife

      You Might Also Like

      How to
      Blow Up an Air Mattress & Keep It Inflated
      How to
      Locate a Leak in an Air Mattress
      6 Clever Ways to Fill an Air Mattress Without a Pump
      The Best Patch Kits and DIY Fixes for a Leaky Air Mattress
      How to
      Dry a Mattress
      How to
      Roll Up or Compress a Memory Foam Mattress
      How to
      Clean Pee Out of a Memory Foam Mattress & Get the Smell Out
      Leaky Air Mattress? Simple Repairs for a Good Night's Sleep
      How to
      Move a Mattress: Simple Tips for Moving Without Professional Help
      How to
      Rotate a Mattress
      How to
      Stop a Mattress from Sliding
      How to
      Dispose of a Box Spring
      How to
      Restore a Musty Mattress
      7 Places That Take Used Mattress Donations
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=xAcYkOErOok&feature=youtu.be&t=80
      2. ↑ https://www.youtube.com/watch?v=xAcYkOErOok&feature=youtu.be&t=128
      3. ↑ https://www.thefoamfactory.com/blog/index.php/cut-foam-easily-with-these-diy-closed-cell-foam-cutting-tips

      About This Article

      Article Summary X

      To cut mattress foam, start by taking off the zip cover and any lining that's on it. Then, use measuring tape to measure the foam and determine where you want to cut it. Next, draw a line on the foam with marker where you want to make the cut and then elevate the mattress so there's nothing directly below the line. Finally, use an electric carving knife or kitchen knife to cut along the marked line. To learn how to choose between an electric and regular knife, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 86,275 times.

      Did this article help you?

      Advertisement