PDF download Download Article PDF download Download Article

Gardening tools used for trimming plants, pruning bushes, removing weeds, and digging soil should be disinfected regularly to prevent transmission of plant pests and diseases. Before you begin the disinfection process, clean the tools to remove dirt, debris, and plant residue. This will ensure that the disinfectant contacts the entire surface of the tool. Then, spray the disinfectant of your choice on your tool, or soak the tool in the disinfectant.

Method 1
Method 1 of 3:

Cleaning the Tools

PDF download Download Article
  1. Before disinfecting tools, remove dirt and grime using a forceful stream of water. Wash them beneath a strong spigot, or use a hose with a jet-stream setting. Clean tools are easier to use and disinfect.
  2. Some soils are difficult to wash off. If you’re having trouble removing dirt and debris from your gardening tools with just water, use a stiff wire-bristle brush or a scraping tool (a caulking knife, for instance) to remove the caked-on material.
    Advertisement
  3. If your tools have any sticky residue on them, such as sap or resin, wipe the affected tools with a cloth or paper towel dampened with a disinfectant. If the sap or resin resists removal, wipe the affected area vigorously with paint thinner.
  4. Advertisement
Method 2
Method 2 of 3:

Disinfecting with Less Corrosive Methods

PDF download Download Article
  1. Commercial household disinfectants (such as Lysol or Simple Green D) can be used to disinfect your gardening tools. The advantage of these types of disinfectants is that they are relatively gentle on you and your tools compared to bleach or industrial cleansers. Fill a bucket with a household cleaner of your choice. Soak the tool in it for a couple minutes, then remove it. [1]
    • To reduce the corrosive aspect of household cleaners further, combine them in a solution of one part cleaner and five parts water.
  2. Some gardening stores might offer disposable disinfectant wipes for gardening tools. You can also use general purpose wipes, such as Lysol or Clorox disinfecting wipes. To use the disinfectant wipe, remove it from its container and wipe the tool thoroughly. Throw away the wipe after use. [2]
    • You might need to use more than one wipe per tool.
  3. Heat your gardening tools to 180°-200° F (82°-93° C) under a cover for about 30 minutes. For instance, you might place some of your smaller gardening tools on a steam basket, cover it, then steam them on the stove for half an hour.
  4. Dip the tools you want to clean in the alcohol, then remove them and allow them to dry. Alternately, wet a rag with alcohol and wipe the gardening tools down.
    • You could use wood, grain, or rubbing alcohol.
    • There’s no need to rinse your tools after using alcohol.
    • Don’t use alcohol around fire or a strong heat source.
  5. Advertisement
Method 3
Method 3 of 3:

Disinfecting with More Corrosive Methods

PDF download Download Article
  1. Mix one part liquid bleach with nine parts water. [3] Dip your gardening tools in the mixture, then remove them and let the material drain off. Alternately, spray or brush the mixture onto the gardening tools and allow it to drain off. Rinse the remaining mixture off the object after most of it has drained away.
    • Liquid bleach is sold under trademarked names like Clorox, Everchlor, Hypo, Bridos, Bleacol, and Hispec.
    • Bleach is one of the most corrosive of all gardening tool disinfectants. [4]
    • If inhaled, bleach may cause damage to your nose, throat and lungs. It can also damage or irritate your skin. Always wear protective masks and rubber gloves when cleaning tools with bleach solutions.
  2. If you have diseased plants, you may wish to get an industrial-grade gardening disinfectant to help prevent the problem from spreading. The most common varieties are “quats” (or “q-salts”) and hydrogen peroxide-based cleansers. Purchase the disinfectant of your choice from a horticulture or garden supply store, and follow all package directions and warnings carefully.
    • These industrial products are formulated to kill algae, fungus, bacteria, and spores immediately on contact.
    • A few common commercial Q-salt products are Green-Shield, Physan 20, and KleenGrow.
    • Hydrogen peroxide (or hydrogen dioxide) is marketed under trademarked names like ZeroTol and TerraClean.
  3. If you’re using your gardening tools on diseased plants, shrubs, or trees, treat your tools with a disinfectant after every use. This will prevent the disease from spreading throughout a plant or between plants.
  4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What should I use to clean pruning shears?
    Maggie Moran
    Home & Garden Specialist
    Maggie Moran is a Professional Gardener in Pennsylvania.
    Home & Garden Specialist
    Expert Answer
    Spray them with a garden hose or run them under hot water in the sink. Brush the shears with a brillo pad or a wire brush and then wash them with warm water and dish soap.
  • Question
    Can methylated spirits be used as a disinfectant?
    Maggie Moran
    Home & Garden Specialist
    Maggie Moran is a Professional Gardener in Pennsylvania.
    Home & Garden Specialist
    Expert Answer
    You can use it for disinfectant, although it is not as strong as either ethyl alcohol or isopropyl alcohol.
  • Question
    How do you clean garden tools?
    Maggie Moran
    Home & Garden Specialist
    Maggie Moran is a Professional Gardener in Pennsylvania.
    Home & Garden Specialist
    Expert Answer
    Immediately after use, wash them in warm water or with the garden hose. Use oil on the hinge points and tool heads. Keeping them in quality working condition will make them last longer.
See more answers
Ask a Question
      Advertisement

      Tips

      • Cleaning your tools after every use is ideal. At the very least, though, you should clean your tools once at the end of the gardening season.
      • Wash and disinfect your gardening tools after using them on an infected plant.
      • Wipe your tools with a light coat of motor oil or boiled linseed oil after disinfecting them. This will protect them from rust.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      About This Article

      Article Summary X

      To disinfect your gardening tools, start by removing any dirt and debris with water. If the grime is caked on, use a stiff wire-bristle brush to remove the dirt and a paper towel dampened with disinfectant or paint thinner to remove any sticky residue. Once you’re ready to disinfect your tools, dip them in 70% isopropyl alcohol or a mixture of 9 parts bleach to 1 part water. Alternatively, try rubbing your tools down with disinfectant wipes, or soaking them in a commercial household disinfectant for a few minutes. For more tips from our Horticultural co-author, including how to disinfect tools when working with diseased plants, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 139,158 times.

      Reader Success Stories

      • Linda Peters

        Mar 28, 2016

        "I wasn't aware that there were so many different solutions that could clean garden tools. I also appreciate ..." more
      Share your story

      Did this article help you?

      Advertisement