Download Article
Download Article
Glass etchings can be done at home with a few supplies from the craft store. By applying a cream such as Armour Etch to a stencil, you can customize your own drinking glasses and baking dishes and make professional-looking gifts for others. To etch glass with cream, cut a design on vinyl, tape the stencil onto the glass, paint over it with cream, and then wash it off.
Steps
-
Draw the design you want to etch. Blank vinyl pieces can be bought at a craft store. Use a pencil to outline your design on the non-adhesive side. Some vinyl has an adhesive backing. Non-adhesive stencils can also be used but must be taped with an adhesive. Your design can be anything you want, such as a bird, a tree, or letters, but remember that what you draw will be cut out and this shape will be what’s etched on the glass. [1] X Research source- Patterned stencils may also be available, ordered online, or designed and printed.
- For letters, instead of using a stencil, you can etch around tape letters.
-
Place your stencil over vinyl shelf liner. This is only necessary if your stencil cannot adhere directly to the glass. Get a piece of vinyl larger than your stencil. Set the stencil in front of it, then secure the stencil to it by applying tape over the stencil’s edges.Advertisement -
Cut the stencil with a knife. Using an X-acto knife or other sharp knife, cut out your design along the outlines you made. Hold the blade upwards so only the tip touches the stencil. Remove the parts you want to be etched into the glass, taking care not to tear the surrounding space. [2] X Research source
Advertisement
-
Clean the glass with rubbing alcohol. While glass cleaners such as Windex can be used, these may leave a residue that causes uneven etching. Isopropyl rubbing alcohol will remove all debris and fingerprints. Grip the glass in a place that won’t be etched and use a fresh, soft cloth to spread the cleaner and dry the glass. [3] X Research source -
Peel the backing off the vinyl. When using vinyl shelf liner or a stencil with an adhesive backing, peel off the back surface. Bring the stencil up to the area you wish to etch, then use the adhesive to attach it to the glass.- If you’re using tape to create letter outlines, tape the letters and then cover the rest of the glass you don’t want to etch.
-
Smooth out the tape. Whatever adhesive you use, check it over for bubbles. Any raised areas of tape can ruin the etching since the cream will get in there. Run a smoothing tool over the tape to flatten it. Something sturdy, such as a plastic gift card, works well.
Advertisement
-
Spread etching cream over the stencil. Only the area you want to be etched should be covered. Use a paint brush or popsicle stick to spread a thick, even coating over the area. Wear gloves to prevent any of the irritating cream from getting on your skin. [4] X Research sourceEXPERT TIPDesigner & Style Expert, Oh Joy!Joy Cho is the Founder and Creative Director of the lifestyle brand and design studio, Oh Joy!, founded in 2005 and based in Los Angeles, California. She has authored six books and consulted for creative businesses around the world. Joy has lectured on business, leadership, and entrepreneurship at conferences and companies such as AltSummit, Pinterest, Target, and Hallmark, while her home and studio have been featured in magazines such as House Beautiful, Parents, and Domino. She has also been named one of Time's 30 Most Influential People on the Internet multiple times and has the most followed account on Pinterest with more than 14 million followers.Make sure you stick to the outline of the stencil. You don’t want the etching cream to bleed underneath the design. Some stencils require you to hold them down to keep it defined at the edge.
-
Stir the cream twice over five minutes. For a more pronounced etching, use your brush to move the cream on top of your stencil. At about the 1 ½ minute and 3 ½ minute marks, do this to break up air pockets that will cause uneven etching. [5] X Research source -
Leave the cream for five minutes. Overall, including stirring, the cream needs to stay on the glass at least five minutes. If you remove the cream before five minutes,your design will appear lighter. After five minutes, you won’t notice much more improvement in the etching. -
Rinse off the cream with water. Hot water from a faucet will remove the cream while loosening the tape. If you have a ceramic sink or are worried about your plumbing, dip the glass in a clean bucket of water and use a clean cloth to make sure all the cream is gone. [6] X Research source -
Remove the vinyl. Peel back the adhesive you used. A hook-shaped tool can be used to attack the corner of stubborn tape. To avoid scratching the glass, avoid pointing any sharp object at it. -
Dry off the glass. Wipe off any moisture with a clean cloth. Your etching will be finished. It is permanent, so the glass can be used safely and washed in a dishwasher.
Advertisement
Community Q&A
Search
-
QuestionWhat if I don't have vinyl shelf liner, can I use something else instead?Community AnswerYes, you can use vinyl from a local sign shop. It's great because it's stickier than contact paper. They might even be able to cut the stencil for you on their vinyl cutting machine, if you bring in your design. Craft stores might have some vinyl as well.
-
QuestionCan the etching cream be reused?Community AnswerYes, it can. Just scrape off any extra cream from your project and put it back into the container.
-
QuestionHow do I etch outside of a stencil?Community AnswerYou can use tape to cover areas you don't want etched. For example, if you want to make your name, tape the letters, then tape over the rest of the glass you don't want etched. If you want to etch a large area, this isn't a good idea for cream, since cream isn't strong enough. You can use a sandblaster on larger pieces of glass.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Etching cream works best on small areas.Thanks
- Some glass, including some Pyrex, cannot be etched.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Wear gloves when handling etching cream, as it is irritating to the skin.Thanks
- Be careful when using a knife and secure it when not in use.Thanks
Advertisement
Things You'll Need
- Etching cream
- Latex or plastic gloves
- Vinyl shelf Liner
- Paint brush or popsicle stick
- Glass
- A stencil
- X-acto knife
- Rubbing alcohol
- Paper Towels
- Scotch Tape
References
- ↑ http://www.makeit-loveit.com/2010/06/glass-etching.html
- ↑ http://www.glassetchingsecrets.com/howtosteps.html
- ↑ http://www.theyummylife.com/etched_glass_tutorial
- ↑ http://www.thinkingcloset.com/2013/09/30/personalized-etched-glass-bakeware-tutorial-silhouette-winner/
- ↑ http://www.theyummylife.com/etched_glass_tutorial
- ↑ http://www.etchworld.com/faq
About This Article
Article Summary
X
To etch glass with etching cream, you’ll need adhesive vinyl, a piece of glass, a pencil, and etching cream. First, draw your design on the vinyl and cut it out. Then, wash the glass with rubbing alcohol, which will help your stencil stick. Then, stick your stencil onto the glass, making sure that it’s smoothed out. If you leave any bubbles, the cream will get inside them and ruin the etching. Cover your stencil with cream and leave it on for 5 minutes. After the time is up, wash off the cream with warm water and peel off the stencil to reveal your etching design. For tips from our Design co-author on how to make your etching appear stronger, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 305,925 times.
Reader Success Stories
- "My bottle didn't give directions as to how long you're supposed to leave it on the glass or any other directions. There were only cautions about how hazardous it was. This was very helpful in teaching how to apply and for how long before washing it off. Much appreciated! " ..." more
Advertisement
90%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"My bottle didn't give directions as to how long you're supposed to leave it on the glass or any other directions. There were only cautions about how hazardous it was. This was very helpful in teaching how to apply and for how long before washing it off. Much appreciated! "
..."
more
"I am wanting to learn to etch glass as a hobby. Was afraid to try it, but this video was explicit in telling materials to use and giving directions for using it to learn the process"
..."
more
"My first project was to etch champagne glasses for a wedding, with no room for mistakes. They turned out great! I love how easy Armour Etch made it."
..."
more
"First time using etching cream, these directions helped perfectly. So excited with how great the project came out! Thanks for the help."
..."
more
"Used it to remove anti-glare coating from my glasses, and it worked great!"
