How to Fix Flickering Lights

PDF download Download Article
PDF download Download Article

Flickering lights are a common problem. The cause can range from a loose bulb to faulty wiring. If your lights are flickering, first check if your bulbs are loose and tighten them up to see if that solves the problem. Then tighten the wiring in your light switches. Finally, make sure the screws in your breaker box are tight and see if this fixes your problem. If your lights continue flickering, contact a professional electrician for a full assessment.

Method 1
Method 1 of 3:

Tightening the Lightbulbs

PDF download Download Article
  1. When lights start flickering, the first question is whether the problem is from your wiring or the lightbulb itself. Wiring problems would affect multiple fixtures and maybe even the whole building. Check the other lights in your home. If only one or two are flickering, then the problem is probably not with your home’s wiring. [1]
  2. Whether the flickering light is on a fixture or appliance, start by turning the switch off. Then wait a few minutes for the bulb to cool down so you don’t burn yourself. [2]
    • If you don’t want to wait for the bulb to cool, you could wrap a towel or oven mitt around your hand to protect it from the heat.
    • Never try to adjust electrical appliances while the power is on. Always turn the power off first.
    Advertisement
  3. A loose lightbulb flickers because it forms an incomplete circuit with the electrical socket. [3] Tightening the bulb should fix this problem. Turn the bulb clockwise to tighten it. [4]
    • Stop turning the bulb when it won’t go any further. Overtightening can damage the socket or even crack the bulb. You could cut yourself if the bulb breaks in your hand.
    • Some lightbulb sockets spin along with the bulb, so you need two hands to tighten it. Hold the socket with one hand to keep it still while you turn the bulb with the other hand.
  4. If the lights were flickering because the bulb was loose, then the problem should be fixed when you turn the lights back on. If the flickering continues, the problem is probably with the light switch or your home’s wiring. [5]
    5. Advertisement
Method 2
Method 2 of 3:

Fixing the Connection in Your Light Switches

PDF download Download Article
  1. Sometimes the flickering is from a loose connection in your light switches. [6] This is especially common if you have a dimmer on the switch. Test your light switches by jiggling the knob. If the lights flicker while you do this, you probably have a loose connection in the switch. [7]
    • Slowly raise the dimmer up and down as well. See if the lights dim and brighten consistently, or if there are quick jumps in brightness.
  2. Before adjusting the connection in your light switch, make sure the power is turned off in this room. [8] Go to your breaker box and find the circuit breaker that powers the room you’re working in. Turn it to the Off position to cut the power to the room. [9]
    • Test the switches in the room to make sure the power is off.
    • Note that in this method you'll be working with wires. If you aren't confident in your ability to work with electricity, call a professional electrician.
  3. There are 4 screws holding the light fixture to the wall. The first 2 secure the wall plate over the fixture. Remove them and take off the plate. Then remove the next 2 that hold the fixture itself to the wall. [10]
    • Use a flathead screwdriver for this step. Since you're working with wires, use a screwdriver with a rubber handle.
    • Keep track of all the screws you remove so you can replace them when you're done.
  4. Gently pull the fixture out of the wall. You’ll see wires secured to the light fixture with screws. Take your screwdriver and tighten each screw so it's snug. [11]
    • Don’t overtighten the screws. Some might be tight enough and don’t need an adjustment. Don’t push the screws further if they stop spinning easily.
  5. Flickering is common when LED lights don’t have an LED-compatible dimmer. If you use a dimmer and LED bulbs, your dimmer may not be LED-compatible. If your dimmer is already installed, you probably can’t tell just by sight if it’s designed for LED use. Try looking at the model number on the dimmer and doing an internet search for it. If you can’t find any information, contact the manufacturer and ask. [12]
    • Change the dimmer switch to an LED-compatible one to fix the flickering problem.
    • When buying a new dimmer, look at the packaging for text indicating that it is LED-compatible. If you aren’t sure, ask a store employee for help.
    6. Advertisement
Method 3
Method 3 of 3:

Checking the Wiring in Your Fuse Box

PDF download Download Article
  1. Find your breaker box to check the wiring. If the lights are flickering in multiple rooms or appliances, then the problem is probably in your home’s wiring. A common cause is one or more screws in your circuit breaker box loosening over time. This causes an incomplete connection. Start by finding your breaker box to check its wiring. [13]
  2. Never work on your fuse box with the power connected. Switch off the main breaker first. [14] The main breaker is a larger switch than all the other circuit breakers. It is usually in the middle or on the top of the breaker panel. Switch it to the Off position before proceeding. [15]
    • Note that this will cut power for your whole home. Turn off any appliances and make sure no one needs the electricity before you do this. Have a flashlight or battery-powdered lamp with you so you can see what you’re doing.
    • To confirm the power is off, use a voltage tester to make sure there is no electric current in the breaker box.
    • If you're unfamiliar with working on wires and electrical panels, call a professional electrician for this job.
  3. The metal housing around the breaker panel covers the panel’s internal wiring. Remove the screws holding the panel down. There will probably be 4 or 6 screws, depending on how the panel was installed. Then carefully lift the housing off when all the screws are removed. [16]
    • Use a flathead screwdriver with a rubber handle for this step.
    • Keep track of all the screws you remove so you can put them back when you’re done.
  4. If you look at the ends of the circuit breakers, you’ll see that each one has a wire running into it. Near where the wire enters the breaker is a screw that holds the wire in place. If this screw is loose, it could cause flickering lights. Work your way down the breaker panel and tighten every screw. Use a flathead screwdriver and turn the screws clockwise. [17]
    • Many of the screws might not tighten easily. This means they are already tight enough, so don’t force them. You only have to tighten screws that have loosened up over time.
  5. Pick up the breaker panel and hold it up to the fuse box. Line up the screw holes in the panel with the ones on the box. Then hold the panel against the box and insert each screw. [18]
    • Turn each screw by hand as much as you can so the panel remains stable. Then you can stop holding it up and tighten each screw with a screwdriver.
  6. If none of these troubleshooting methods work and your lights continue flickering, there may be more wiring problems in your home. These require professional assessment. [19] Contact an electrician to inspect your home and find the root of the problem. [20]
    • Don’t ignore potential electrical problems in your home. Faulty wiring can cause a fire. Don’t delay in bringing in a professional.
    7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What would cause lights to flicker?
    Daniel Stoescu
    Master Electrician
    Daniel Stoescu is a Master Electrician and the Owner and Operator of Home Tech Solutions, LLC in Hampton, Virginia. With over a decade of experience, Daniel specializes in wiring residential, commercial, and light industrial structures. The Home Tech Solutions team has over four decades of combined experience and offers comprehensive solutions for residential electrical needs.
    Daniel Stoescu
    Master Electrician
    Expert Answer
    Loose connections, bad switches, faulty ballasts, and bad bulbs can cause flickering lights. You can find loose connections anywhere from the meter socket to the light switch.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 9
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • If you’re not comfortable with your ability to work with electricity, call an electrician. Electricity is very dangerous and you could injure yourself or cause a fire if you make a mistake.
        Thanks
        Helpful 1 Not Helpful 0
      • Wear rubber gloves and use tools with rubber handles when working with electricity.
        Thanks
        Helpful 1 Not Helpful 0
      • Always make sure the power is off before working on electrical outlets or switches.
        Thanks
        Helpful 2 Not Helpful 0
      Advertisement

      You Might Also Like

      Easiest Way to Install LED Strip Lights
      How to
      Test LED Lights
      How to
      Cut Led Strip Lights
      How to
      Make a Homemade Flashlight
      How to
      Daisy Chain Lights
      How to
      Hang Fairy Lights
      How to
      Install a New Light Fixture
      How to
      Wire a Light
      How to
      Install a New Ceiling Light Fixture
      How to
      Install a Pendant Light
      How to
      Connect LED Strip Lights
      How to
      Replace a Fluorescent Light Cover, Tube, or Fixture
      How to
      Test Fluorescent Bulbs
      How to
      Replace a Recessed Bulb (Without Removing the Fixture!)
      Advertisement

      References

      1. ↑ https://www.cnet.com/how-to/flickering-lights-check-these-common-culprits-first/
      2. ↑ https://www.cnet.com/how-to/flickering-lights-check-these-common-culprits-first/
      3. ↑ Daniel Stoescu. Master Electrician. Expert Interview. 21 June 2021.
      4. ↑ https://www.cnet.com/how-to/flickering-lights-check-these-common-culprits-first/
      5. ↑ https://www.bobvila.com/articles/flickering-lights/
      6. ↑ Daniel Stoescu. Master Electrician. Expert Interview. 21 June 2021.
      7. ↑ https://www.bobvila.com/articles/flickering-lights/
      8. ↑ Daniel Stoescu. Master Electrician. Expert Interview. 21 June 2021.
      9. ↑ https://youtu.be/ZmNpV0cACLQ?t=14
      1. ↑ https://youtu.be/ZmNpV0cACLQ?t=25
      2. ↑ https://youtu.be/ZmNpV0cACLQ?t=67
      3. ↑ https://www.washingtonpost.com/business/2018/07/25/how-stop-your-led-lights-flickering/
      4. ↑ https://www.cnet.com/how-to/flickering-lights-check-these-common-culprits-first/
      5. ↑ Daniel Stoescu. Master Electrician. Expert Interview. 21 June 2021.
      6. ↑ https://youtu.be/atPvvDDE4OM?t=29
      7. ↑ https://youtu.be/atPvvDDE4OM?t=35
      8. ↑ https://youtu.be/atPvvDDE4OM?t=75
      9. ↑ https://youtu.be/atPvvDDE4OM?t=169
      10. ↑ Daniel Stoescu. Master Electrician. Expert Interview. 21 June 2021.
      11. ↑ https://www.bobvila.com/articles/flickering-lights/

      About This Article

      Thanks to all authors for creating a page that has been read 70,126 times.

      Reader Success Stories

      • Jane D.

        Apr 10

        "Following your instructions and excellent diagrams, I've fixed my flickering overhead lights by tightening the ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement